Mazda Mazda6 Service Bulletins (2003)
210 manufacturer communications on file.
- April 27, 2018•Document ID: 10136776Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- 04-004-18-3468
- Date Added:
- May 14, 2018
- Manufacturer:
- MAZDA
SummarySome vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
Associated Products (96)2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda22016 Mazda Mazda32016 Mazda Mazda52016 Mazda Mazda62016 Mazda MX-5+ 76 moreAssociated Documents - April 16, 2018•Document ID: 10136782Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- 07-002-18-3432
- Date Added:
- May 14, 2018
- Manufacturer:
- MAZDA
SummaryA musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. "Mazda Air Cooling Coil Coating" is available to encapsulate the mold to reduce odors. If the product is properly applied, it can effectively reduce the musty/mildew odor for up to three years. NOTE: See parts information for Mazda Air Cooling Coil Coating and Kit part numbers. This treatment provides a durable coating that will aid to prevent biological reactions that lead to odorconcerns. It is applied to the evaporator in a misted form that is introduced by way of the cabin air filter, the re-circulate door, the blower motor resistor access, or the blower motor air intake. Proper application requires the evaporator surface to be: Relatively clean and free of leaves, dust build-up and debris. Thoroughly dried, and the product cured onto it after application. NOTE: Keep the cooling unit dry by leaving the blower fan ON (at least on low), even if the A/C is not being used. In low humidity (dry) conditions, keep the ventilation system in the "FRESH" mode all the time, or as much as possible. In high humidity conditions, or if the air has a lot of dust or pollen, keep the system in the "RECIRCULATION" mode. A few minutes before reaching a destination, turn the A/C OFF, but leave the blower fan ON. This stops the accumulation of condensation on the evaporator/cooling unit, and it helps dry the inside of the cooling unit. A/C odor is not unique to Mazda vehicles as it will occur in other makes and models. To minimize A/C odor, suggest the following to the customers.
Associated Products (98)2018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-92015 Mazda Mazda32015 Mazda Mazda52015 Mazda Mazda6+ 78 moreAssociated Documents - April 2, 2018•Document ID: 10136777Service Bulletin/Repair InstructionsPOWER TRAIN; EQUIPMENT
- Mfr Comm. #:
- 05-001-18-3453
- Date Added:
- May 14, 2018
- Manufacturer:
- MAZDA
SummaryAlways be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCON®LV ATF. ATF M-V (TYPE M5) HAS A GREATER VISCOSITY THAN MERCON®V AND MERCON®LV ATF IN LOW TEMPERATURES. ATF M-V (TYPE M5) HAS A GREATER ANTI-JUDDER SPECIFICATION THAN MERCON®V AND MERCON®LV ATF. TRANSMISSION FLUID FLUSHING SHOULD ONLY BE PERFORMED WHEN INSTRUCTED BY THE WORKSHOP MANUAL OR ANY OTHER MAZDA PUBLICATION.
Associated Products (90)2018 Mazda MX-52017 Mazda MX-52016 Mazda MX-52015 Mazda CX-92015 Mazda Mazda52015 Mazda MX-52014 Mazda CX-92014 Mazda Mazda22014 Mazda Mazda52014 Mazda MX-52013 Mazda CX-92013 Mazda Mazda22013 Mazda Mazda32013 Mazda Mazda52013 Mazda Mazda62013 Mazda MX-52012 Mazda CX-72012 Mazda CX-92012 Mazda Mazda22012 Mazda Mazda3+ 70 moreAssociated Documents - March 26, 2018•Document ID: 10134930Service Bulletin/Repair InstructionsSUSPENSION:FRONT:SHOCK ABSORBER; SUSPENSION:REAR:SHOCK ABSORBER
- Mfr Comm. #:
- 02-006-18-3449
- Date Added:
- April 23, 2018
- Manufacturer:
- MAZDA
SummarySome customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
Associated Products (128)2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 108 moreAssociated Documents - March 26, 2018•Document ID: 10134929Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- 01-009-18-3452
- Date Added:
- April 23, 2018
- Manufacturer:
- MAZDA
SummaryThe Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
Associated Products (137)2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 117 moreAssociated Documents - March 26, 2018•Document ID: 10134928Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- 01-008-18-3451
- Date Added:
- April 23, 2018
- Manufacturer:
- MAZDA
SummaryThis service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
Associated Products (138)2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 118 moreAssociated Documents - March 26, 2018•Document ID: 10134703Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 09-019-18-3450
- Date Added:
- April 23, 2018
- Manufacturer:
- MAZDA
SummaryThis service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is stacked one on top of another. Use these points at your dealership to protect our mutual operations and to help ensure our customers' safety.
Associated Products (138)2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 118 moreAssociated Documents - March 22, 2018•Document ID: 10134702Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 09-014-18-3443
- Date Added:
- April 23, 2018
- Manufacturer:
- MAZDA
SummaryWhen encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
Associated Products (141)2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda22016 Mazda Mazda32016 Mazda Mazda52016 Mazda Mazda62016 Mazda MX-5+ 121 moreAssociated Documents - March 22, 2018•Document ID: 10134701Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:TAIL LIGHTS; EXTERIOR LIGHTING:HEADLIGHTS
- Mfr Comm. #:
- 09-011-18-3448
- Date Added:
- April 23, 2018
- Manufacturer:
- MAZDA
SummarySome customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light housing. It is normal for very small water drops to appear incertain locations on the light units where the air is stagnant (condensation), making the lens look whitish (fog). This happens mostly in the corners and narrow spaces, and will typically clear during warmer ambient temperatures, or when the lights have been on for some time.
Associated Products (93)2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 73 moreAssociated Documents - March 22, 2018•Document ID: 10134699Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 00-001-18-3446
- Date Added:
- April 23, 2018
- Manufacturer:
- MAZDA
SummaryMazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
Associated Products (131)2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda52016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-5+ 111 moreAssociated Documents - February 16, 2018•Document ID: 10134925Service Bulletin/Repair InstructionsAIR BAGS; EQUIPMENT
- Mfr Comm. #:
- MT-003-18
- Date Added:
- April 23, 2018
- Manufacturer:
- MAZDA
SummaryThe Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles.
Associated Products (94)2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 74 moreAssociated Documents - January 30, 2018•Document ID: 10129576Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 01-002-18-3417
- Date Added:
- March 5, 2018
- Manufacturer:
- MAZDA
SummarySome vehicles may have a MIL illumination with DTC's P0441, P0442, P0455, or P0456 stored in memory. To determine the location of the evaporative system leak, follow the repair procedure below. P0441 - Evaporative emission control system incorrect purge flow P0442 - EVAP system leak detected (small leak) P0455 - EVAP system leak detected (gross leak) P0456 - EVAP system leak detected (very small leak) NOTE: P0441 is a DTC for purge flow, however, it can be stored when evaporative emissions are leaking from the fuel filler cap. Evaporative emissions leak from the fuel filler cap when the cap is not closed properly after refueling. When diagnosing an evaporative emissions leak from the fuel filler cap, DO NOT TOUCH the fuel filler cap.
Associated Products (30)2015 Mazda MX-52014 Mazda MX-52013 Mazda MX-52012 Mazda MX-52011 Mazda MX-52010 Mazda Mazda32010 Mazda Mazda52010 Mazda Mazda62010 Mazda MX-52009 Mazda Mazda32009 Mazda Mazda52009 Mazda Mazda62009 Mazda MX-52008 Mazda Mazda32008 Mazda Mazda52008 Mazda Mazda62008 Mazda MX-52007 Mazda Mazda32007 Mazda Mazda52007 Mazda Mazda6+ 10 moreAssociated Documents - September 12, 2017•Document ID: 10118753Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- SA-068-17
- Date Added:
- October 12, 2017
- Manufacturer:
- MAZDA
SummarySTOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do not remove it), and then pull out the connector.
Associated Products (33)2011 Mazda CX-72011 Mazda CX-92011 Mazda Mazda62011 Mazda RX-82010 Mazda CX-72010 Mazda CX-92010 Mazda Mazda62010 Mazda RX-82009 Mazda B-Series2009 Mazda CX-72009 Mazda CX-92009 Mazda Mazda62009 Mazda RX-82008 Mazda B-Series2008 Mazda CX-72008 Mazda CX-92008 Mazda Mazda62008 Mazda RX-82007 Mazda B-Series2007 Mazda CX-7+ 13 moreAssociated Documents - August 7, 2017•Document ID: 10118467Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- 09-035-17-3080
- Date Added:
- October 4, 2017
- Manufacturer:
- MAZDA
SummaryIn accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
Associated Products (161)2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 141 moreAssociated Documents - July 26, 2017•Document ID: 10120381Service Bulletin/Repair InstructionsAIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
- Mfr Comm. #:
- 08-003-17-3345
- Date Added:
- October 21, 2017
- Manufacturer:
- MAZDA
SummaryMazda Motor Corporation is going to evaluate the following inflators to ensure the safety of the inflator with a desiccant. In order to do this, MNAO is collecting inflators for evaluation in certain zones. For 2003-2008 Mazda6 (including Mazdaspeed6) and 2004-2011 RX-8: Collect 30 Driver-side and 30 Pas-senger-side inflators (60 total) from vehicles that have completed Recall 8215F for Driver-side and Recall 9416E for Passenger-side airbags in the following zones. For 2010-2013 Mazda3: Collect 200 Passenger-side inflators from vehicles in the following zones.
Associated Products (18)Associated Documents - July 12, 2017•Document ID: 10111036Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- SA-061-17
- Date Added:
- August 10, 2017
- Manufacturer:
- MAZDA
SummaryIn an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
Associated Products (125)2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda22018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda22017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda22016 Mazda Mazda32016 Mazda Mazda6+ 105 moreAssociated Documents - June 21, 2017•Document ID: 10111026Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING; AIR BAGS
- Mfr Comm. #:
- 17-04
- Date Added:
- August 10, 2017
- Manufacturer:
- MAZDA
SummaryA newly established short cord (P/N GAY2-67-SH0) has been released if a connector is broken when performing Recall 9416E.
Associated Products (6)Associated Documents - May 22, 2017•Document ID: 10186334Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- 09-018-17
- Date Added:
- February 1, 2021
- Manufacturer:
- MAZDA
SummaryDisplay shows inaccurate ambient temperature. Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature.
Associated Products (71)2017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda22017 Mazda Mazda32017 Mazda Mazda52017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda22016 Mazda Mazda52016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-92015 Mazda Mazda22015 Mazda Mazda52015 Mazda Mazda6+ 51 moreAssociated Documents - May 22, 2017•Document ID: 10118129Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- 09018173351
- Date Added:
- September 27, 2017
- Manufacturer:
- MAZDA
SummarySome customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer noticed this symptom. If the condition is similar to the following "CONTROL LOGIC OF AMBIENT TEMPERATURE" or "DIFFERENCE BETWEEN THE TEMPERATURE DISPLAY AND OTHERS", advise the customer that this is a normal characteristic of the vehicle and not a malfunction. If the condition does not meet the following and the sensor malfunction is suspected, make sure to inspect the sensor according to MGSSonline or Workshop Manual (section 09-22 AMBIENT TEMPERATURE SENSOR INSPECTION). Replace the sensor only when it fails the Workshop Manual inspection.
Associated Products (83)2017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda22017 Mazda Mazda32017 Mazda Mazda52017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda22016 Mazda Mazda32016 Mazda Mazda52016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-92015 Mazda Mazda22015 Mazda Mazda3+ 63 moreAssociated Documents - March 9, 2017•Document ID: 10111011Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:HEADLIGHTS
- Mfr Comm. #:
- 09-008-17-3324
- Date Added:
- August 10, 2017
- Manufacturer:
- MAZDA
SummaryTake caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limited Warranty term.
Associated Products (91)2017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda22017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda22016 Mazda Mazda32016 Mazda Mazda52016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-92015 Mazda Mazda22015 Mazda Mazda32015 Mazda Mazda5+ 71 moreAssociated Documents