Mazda Mazda3 Service Bulletins
719 manufacturer communications on file.
- April 25, 2023•Document ID: 10235702Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SA-026-23
- Date Added:
- May 5, 2023
- Manufacturer:
- MAZDA
SummaryA tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.
Associated Products (12)Associated Documents - April 25, 2023•Document ID: 10235576Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT:ELECTRICAL:INFOTAINMENT; LATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- SA-009-23c
- Date Added:
- May 4, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about any of the following:1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative.Engine Start / Stop,Door Lock / Unlock,Lights ON / OFF. 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
Associated Products (16)Associated Documents - April 21, 2023•Document ID: 10235700Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-025-23
- Date Added:
- May 5, 2023
- Manufacturer:
- MAZDA
SummaryWhen the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.
Associated Products (10)Associated Documents - April 18, 2023•Document ID: 10235420Service Bulletin/Repair InstructionsLANE DEPARTURE: SENSING SYSTEM: RADAR; EQUIPMENT
- Mfr Comm. #:
- 15-001-23
- Date Added:
- May 3, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit the warning messages Safety and Driver Support Systems Temporarily Disabled or Front Radar Obscured. Drive Safely displayed in the instrument cluster despite no dirt on the front radar sensor while driving in specific locations as follows:
Associated Products (3)Associated Documents - April 14, 2023•Document ID: 10235701Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-022-23
- Date Added:
- May 5, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about an intermittent Beep sound (popping sound) every 1-2 minutes while driving. This may be cause by a software error in the navigation SD card.
Associated Products (10)Associated Documents - April 14, 2023•Document ID: 10235696Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-021-23
- Date Added:
- May 5, 2023
- Manufacturer:
- MAZDA
SummaryQi Wireless Charger symptom troubleshooting
Associated Products (13)Associated Documents - April 13, 2023•Document ID: 10235693Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY
- Mfr Comm. #:
- SA-020/23
- Date Added:
- May 5, 2023
- Manufacturer:
- MAZDA
SummarySome customers will report that their fuel door was stuck closed and would not open to refuel the vehicle. Follow the repair steps below unless the conditions outlined in TSB 09-019/21 - FUEL-FILLER LID PANEL IS DEFORMED for 2019-2021 Mazda3 and 2020-2021 CX-30 are present.
Associated Products (8)Associated Documents - April 11, 2023•Document ID: 10235417Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR
- Mfr Comm. #:
- 09-018-23
- Date Added:
- May 3, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit the glass run channel of the front door interfering with the rear door garnish. This is caused by the front door glass run channel not being fixed strongly enough to the door for the following situations where the cycles of door operation may result in interference and lead to damage on the rear door garnish.
Associated Products (3)Associated Documents - April 4, 2023•Document ID: 10235705Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-018-23a
- Date Added:
- May 5, 2023
- Manufacturer:
- MAZDA
SummaryThis service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the batteries periodically according to the repair procedure.
Associated Products (14)Associated Documents - April 3, 2023•Document ID: 10235415Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 09-007-23a
- Date Added:
- May 3, 2023
- Manufacturer:
- MAZDA
SummaryAt PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.
Associated Products (21)2024 Mazda CX-902023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-302023 Mazda MX-52022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-302022 Mazda MX-52021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda32021 Mazda Mazda6+ 1 moreAssociated Documents - April 3, 2023•Document ID: 10235414Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 06-001-23a
- Date Added:
- May 3, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit wear/peel-off of the leather steering wheel surface causing a poor appearance. This concern may be caused by an insufficient wear resistance of the steering wheel surface.
Associated Products (6)Associated Documents - March 31, 2023•Document ID: 10233664Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- RF-23-04
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummaryDue to a supplier change, Channel (L) Glass BDMT-59-60ZB-> BDMT-59-60ZF has been discontinued. The new part number BDMT-59-60ZH or later has been confirmed as an interchangeable part. Slight modifications will need to be made while also using rivet 90257-4810.
Associated Products (1)Associated Documents - March 28, 2023•Document ID: 10233685Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-018-23
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummaryThis service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the batteries periodically according to the repair procedure.
Associated Products (12)Associated Documents - March 28, 2023•Document ID: 10233683Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES; EXTERIOR LIGHTING; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SA-009-23b
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
Associated Products (14)Associated Documents - March 24, 2023•Document ID: 10233663Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- eFC-1-21-00443a
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummaryA Technical Service Bulletin (TSB 08-001 /22 - AIR BAG WARNING LIGHT ON WITH OTC B1126: 13 OR B1127:13) has been released to repair 2019-2022 Mazda3 with OTC B1126:13/B1127:13. Follow the TSB to repair the vehicle before replacing the airbag module. MC is working on a separate TSB for 2020-2022 CX-30.
Associated Products (2)Associated Documents - March 22, 2023•Document ID: 10233661Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 09-012-23a
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain that the seat warmer does not operate when turning the ignition on while the seat is warm but when turning the ignition off then on again, the seat warmer begins to operate appropriately. DTCs âB1030:13â and/or âB1032:13â are stored. This is caused by the seat warmers fail-safe mode which prevents it from working during the initial drive cycle. To correct this issue, the seat warmer has been modified to optimize the temperature control. B1030:13 Seat warmer unit (LH) circuit malfunction (Heater side), B1032:13 Seat warmer unit (RH) circuit malfunction (Heater side)
Associated Products (6)Associated Documents - March 21, 2023•Document ID: 10233669Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- SA-016-23
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummaryThere are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method. B. Auxiliary Key Code Cut Method
Associated Products (19)Associated Documents - March 20, 2023•Document ID: 10233687Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSPC8
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummarySPECIAL SERVICE PROGRAM SSPC8 - 2023 CX-9, 2023 MAZDA3, 2022-2023 MX-30 - REMOTE TUNER CONCERN. Mazda Motor Corporation has decided to conduct a Special Service Program on certain 2023 CX-9, 2023 Mazda3 and 2022-2023 MX-30 vehicles equipped with a Remote Tuner module. There are 16,405 U.S. vehicles in the United States affected by this SSP.Certain Remote Tuner modules were built with outdated software and therefore the power shutdown processing of the module may not be completed. In this condition, if the vehicle is left unused for a certain amount of time, the 12V battery may discharge and run out.
Associated Products (3)Associated Documents - March 17, 2023•Document ID: 10233569Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:INFOTAINMENT
- Mfr Comm. #:
- 16-003-23
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain that Mazda Connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware (DRAM) of the CMU has been improved.
Associated Products (9)Associated Documents - March 10, 2023•Document ID: 10233674Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- SA-015-23
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummaryMazda Connect Services - Frequently Asked Questions (FAQ)
Associated Products (14)Associated Documents