Mazda CX-90 Service Bulletins
502 manufacturer communications on file.
- June 22, 2024•Document ID: 11003222Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 05-001-24b
- Date Added:
- July 4, 2024
- Manufacturer:
- MAZDA
SummarySome customers may complain about the following symptoms: A bark, hoot, crunch, chirp, honk noise and/or vibration during 1-2 shift while accelerating from a complete stop at operating temperature. A vibration when engine restarting by i-stop function. NOTE: See attached video file "Sample Noise" at end of document. This shift noise and/or vibration may be caused by improper hydraulic pressure control of the automatic transmission. To eliminate these concerns, the control software of the TCM has been modified.
Associated Products (1)Associated Documents - June 19, 2024•Document ID: 11003356Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 09-024-24a
- Date Added:
- July 5, 2024
- Manufacturer:
- MAZDA
SummarySome customers may experience the following concerns: The liftgate or the trunk lid will not unlock even when the vehicle is parked and the ignition is off. If the engine is running (POWER ON) or the ignition is turned to on (READY ON), it will unlock. The auto close operation of the power liftgate is not performed (The liftgate can be closed manually). To eliminate this concern, the control software of the DSC HU/CM (or the electronically controlled brake unit) has been modified. Customers
Associated Products (5)Associated Documents - June 19, 2024•Document ID: 11003228Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 15-003-24
- Date Added:
- July 4, 2024
- Manufacturer:
- MAZDA
SummarySome customers may experience that, after overtaking a truck and moving in front of the truck with turn signal on, the steering assist pushes the vehicle back to the overtaking lane even without BSM warning light turning on in the outer mirror. This may be caused by an improper detection by the side radar sensors occurring in a specific driving environment. To eliminate this concern, the control software of the side radar sensors has been modified.
Associated Products (1)Associated Documents - June 18, 2024•Document ID: 11003362OtherUNKNOWN OR OTHER; STRUCTURE:BODY
- Mfr Comm. #:
- SA-039-24
- Date Added:
- July 5, 2024
- Manufacturer:
- MAZDA
SummaryThe image and text are incorrect in the original installation instruction for Section 9, step 16 where it shows a square head nut, washer, and flange nut. The washer is not used in this portion of the installation and the image and bolt assembly description is incorrect The correct image shown below in image on the right.
Associated Products (3)Associated Documents - June 13, 2024•Document ID: 11003225Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-028-24a
- Date Added:
- July 4, 2024
- Manufacturer:
- MAZDA
SummarySome customers may experience a warning message for the approaching vehicle audible system (AVAS) right after the ignition is turned on (POWER ON) while a loud noise, such as a horn, occurs close to the vehicle. Upon inspection, DTC B1A03:2B [ISB_AMP] (AVAS device circuit malfunction) is stored in memory. This may be caused by an internal initial diagnosis in the notification and warning amplifier detecting a false malfunction under this particular situation. To eliminate this concern, the control software of the notification and warning amplifier has been modified.
Associated Products (2)Associated Documents - June 12, 2024•Document ID: 11003219Service Bulletin/Repair InstructionsENGINE; POWER TRAIN; UNKNOWN OR OTHER
- Mfr Comm. #:
- 01-006-24
- Date Added:
- July 4, 2024
- Manufacturer:
- MAZDA
SummarySome customers may experience a driving feel concern due to a late response to start the engine (and cancel EV mode) while climbing uphill in EV mode under a low battery SOC (30% or lower) condition. This may be caused by improper control software of the PCM. To eliminate this concern, the control software of the PCM has been modified.
Associated Products (1)Associated Documents - June 11, 2024•Document ID: 11003227Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 09-032-24
- Date Added:
- July 4, 2024
- Manufacturer:
- MAZDA
SummarySome customers may complain that the rear outer handle is difficult to operate or that it gets stuck when released after being pulled once. This is caused when the rear outer handle and the rear handle bracket swell up from absorbing water and the space between them is reduced, resulting in friction and resistance when returning to the rest position after the handle has been pulled. To eliminate this concern, the rear outer handle and the rear outer handle bracket has been modified to secure space between them even if the parts absorb water.
Associated Products (1)Associated Documents - June 7, 2024•Document ID: 11003398OtherUNKNOWN OR OTHER
- Mfr Comm. #:
- SA-011-24a
- Date Added:
- July 5, 2024
- Manufacturer:
- MAZDA
SummaryMazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
Associated Products (32)2025 Mazda CX-302025 Mazda CX-52025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-52023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-302023 Mazda MX-52022 Mazda CX-30+ 12 moreAssociated Documents - June 7, 2024•Document ID: 11003397OtherWHEELS
- Mfr Comm. #:
- SA-022-24a
- Date Added:
- July 5, 2024
- Manufacturer:
- MAZDA
SummarySome automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
Associated Products (33)2025 Mazda CX-302025 Mazda CX-52025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-52023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-302023 Mazda MX-52022 Mazda CX-30+ 13 moreAssociated Documents - June 7, 2024•Document ID: 11003396OtherSERVICE BRAKES
- Mfr Comm. #:
- SA-016-24a
- Date Added:
- July 5, 2024
- Manufacturer:
- MAZDA
SummarySome vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
Associated Products (32)2025 Mazda CX-302025 Mazda CX-52025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-52023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-302023 Mazda MX-52022 Mazda CX-30+ 12 moreAssociated Documents - June 7, 2024•Document ID: 11003359Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SA-010-24a
- Date Added:
- July 5, 2024
- Manufacturer:
- MAZDA
SummaryA kick-down switch has been adopted to determine when the customer has fully depressed the throttle pedal for maximum acceleration. A load can be felt while the accelerator pedal is being depressed. When the accelerator pedal is depressed further, the kick-down switch is activated and a click is felt. The driver can control the kick-down by knowing the amount of accelerator depression. An electrical signal is not transmitted by the kick-down switch turning on/off.
Associated Products (3)Associated Documents - June 7, 2024•Document ID: 11003357Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-030-24
- Date Added:
- July 5, 2024
- Manufacturer:
- MAZDA
SummarySome customers may experience the following symptoms: No sound from some audio sources (AM, FM, SiriusXM®) after turning the ignition on. Radio station selection (AM, FM, SiriusXM®) changes unintentionally after turning the ignition on. Audio source cannot be changed. Diagnosing according to MGSS online does not solve the problem. These concerns may be caused by the remote tuner not operating properly under certain situations. To eliminate these concerns, the remote tuner control software has been modified.
Associated Products (11)Associated Documents - June 1, 2024•Document ID: 11000778OtherSTRUCTURE:BODY
- Mfr Comm. #:
- SA-036-24
- Date Added:
- June 4, 2024
- Manufacturer:
- MAZDA
SummarySome customers may complain about color discrepancies (brightness differences) of the image displayed on the screen when using the 360°view monitor. As this phenomenon is not a system failure, do not make any repairs or replace any parts. Explain the cause of this occurrence to the customer as follows: The 360°view monitor is a system that provides a complete picture of the vehicle surroundings by combining the pictures captured by 4 separate cameras. These cameras are installed in the front, rear, right and left sides of the vehicle. Each camera has a color adjustment function (white balance) that operates independently from each other, which can result in color discrepancy when the combined picture is displayed on the screen. This is especially true when one of the cameras captures more green objects than the remaining cameras.
Associated Products (22)2025 Mazda CX-302025 Mazda CX-52025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda Mazda32023 Mazda MX-302022 Mazda CX-302022 Mazda CX-52022 Mazda Mazda32022 Mazda MX-302021 Mazda CX-30+ 2 moreAssociated Documents - June 1, 2024•Document ID: 11000775OtherENGINE
- Mfr Comm. #:
- SA-035-24
- Date Added:
- June 4, 2024
- Manufacturer:
- MAZDA
SummaryThere is a concern that some water pumps are being replaced that are not faulty, due to signs of a very small coolant leak from the bleed hole. This Service Alert is to inform you about the water pump sealing mechanism and the criteria if replacement is necessary or not.
Associated Products (30)2025 Mazda CX-302025 Mazda CX-52025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-52023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-52022 Mazda CX-302022 Mazda CX-5+ 10 moreAssociated Documents - June 1, 2024•Document ID: 11000772Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- 07-003-24a
- Date Added:
- June 4, 2024
- Manufacturer:
- MAZDA
SummarySome customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 °F (10 °C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced at the supplier.
Associated Products (21)2024 Mazda CX-302024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32023 Mazda CX-302023 Mazda CX-502023 Mazda Mazda32023 Mazda MX-52022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-302022 Mazda MX-52021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda32021 Mazda Mazda6+ 1 moreAssociated Documents - June 1, 2024•Document ID: 11000686OtherVISIBILITY/WIPER; EXTERIOR LIGHTING
- Mfr Comm. #:
- SA-030-24
- Date Added:
- June 3, 2024
- Manufacturer:
- MAZDA
SummarySome vehicles may experience a warning light ON, warning messages, or a headlamp concern. After checking the vehicle, DTC B10A3:86 may be stored with or without other DTCs. Follow the repair procedure below for B10A3:86. Customers having this concern should have their vehicle repaired using the following repair procedure.
Associated Products (1)Associated Documents - May 31, 2024•Document ID: 11000670Service Bulletin/Repair InstructionsFUEL/PROPULSION SYSTEM; ENGINE
- Mfr Comm. #:
- 01-004-24
- Date Added:
- June 3, 2024
- Manufacturer:
- MAZDA
SummarySome customers may complain about a noise from the engine compartment at idle. This may be caused by the fuel injection learning cycle at idle from the high pressure fuel pump. To eliminate this concern, the control software of the PCM has been modified.
Associated Products (1)Associated Documents - May 30, 2024•Document ID: 11000773Service Bulletin/Repair InstructionsSEAT BELTS
- Mfr Comm. #:
- 09-002-24a
- Date Added:
- June 4, 2024
- Manufacturer:
- MAZDA
SummarySome customers may complain that the warning sound in the passenger compartment (notifies i-ACTIVSENSE warnings, seat belt warning etc.) is too loud. Some of the volume settings in the notification and warning amplifier are not properly set. The control software of the notification and warning amplifier has been modified to eliminate this concern.
Associated Products (3)Associated Documents - May 30, 2024•Document ID: 11000688OtherSTRUCTURE:BODY; UNKNOWN OR OTHER
- Mfr Comm. #:
- SA-034-24
- Date Added:
- June 3, 2024
- Manufacturer:
- MAZDA
SummaryThis Service Alert provides additional guidance about operation and procedure of the Driver Personalization System from the start of driver recognition to the end of the driving position restoration.
Associated Products (3)Associated Documents - May 30, 2024•Document ID: 11000671Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 05-001-24a
- Date Added:
- June 3, 2024
- Manufacturer:
- MAZDA
SummarySome customers may complain about the following symptoms: A bark, hoot, crunch, chirp, honk noise and/or vibration during 1-2 shift while accelerating from a complete stop at operating temperature. • A vibration when engine restarting by i-stop function. • NOTE: See attached video file "Sample Noise" at end of document. This shift noise and/or vibration may be caused by improper hydraulic pressure control of the automatic transmission. To eliminate these concerns, the control software of the TCM has been modified.
Associated Products (1)Associated Documents