Mazda CX-9 Service Bulletins
439 manufacturer communications on file.
- February 1, 2023•Document ID: 10232300Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 07-002-23
- Date Added:
- March 3, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 °F (10°C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced since December 2021 at the supplier.
Associated Products (14)Associated Documents - January 31, 2023•Document ID: 10230891Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-003-23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may have a "LOW ENGINE OIL LEVEL" warning message and an engine oil level warning light on in the instrument cluster with DTC P250F:00 stored in memory, and the oil level has actually decreased to near low. - DTC P250F:00 - Engine oil level signal: engine oil level low This is caused by an oil consumption increase due to damage of the valve seals on the exhaust side. To eliminate this concern, the design of these valve seals has been modified.
Associated Products (7)Associated Documents - January 27, 2023•Document ID: 10230882Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SA-007/23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummaryThe rear differential case could develop a crack in the case NOTE: This could affect new vehicles just delivered to the dealer as well as customer vehicles. This concern is caused when the sliding bearing in the coupling is seized and causes the coupling component to fit loosely. The pinion shaft head then contacts the differential case and causes a crack.
Associated Products (5)Associated Documents - January 23, 2023•Document ID: 10230906Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 16-002-23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA03_11048 or later).
Associated Products (6)Associated Documents - January 23, 2023•Document ID: 10230902Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 09-006-23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummaryWhen encountering a vehicle with paint damage, refer to the "Mazda Paint Warranty Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
Associated Products (17)Associated Documents - January 23, 2023•Document ID: 10230880Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-006/23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about the infotainment system and/or the MyMazda App showing incorrect clock and/or tire pressures and/or tire pressure missing. This may be caused by: - Incorrect calendar entry (month/day/year) after a battery disconnect - Infotainment system software update. - BCM TPMS unlearn during vehicle storage or transport. - Wheel/Tire change
Associated Products (13)Associated Documents - January 23, 2023•Document ID: 10230865Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- RF-23-01
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummaryWhen servicing SKYACTIV engine vehicles requiring to replace the Oil Galley Plug and Crush Washer, order the required part numbers below. These parts are not listed in GEPC and were previously listed as "non-serviceable" in the cylinder block diagram.
Associated Products (19)Associated Documents - January 19, 2023•Document ID: 10230878Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-005/22
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (13)Associated Documents - January 11, 2023•Document ID: 10230875Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SA-003/23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
Associated Products (15)Associated Documents - January 3, 2023•Document ID: 10230894Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-001-23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit DTC U3000:04 (Telematics communication unit internal malfunction) stored after the connected service contract has been discontinued (only vehicles in which the customer opted out of CV services are affected - CSP04). This is caused by improper control software of telematics communication unit. To eliminate this concern, the control software of telematics communication unit has been modified.
Associated Products (13)Associated Documents - December 20, 2022•Document ID: 10228657Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- SA-078-22
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
Associated Products (15)Associated Documents - December 14, 2022•Document ID: 10228650Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-004-22g
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (13)Associated Documents - December 13, 2022•Document ID: 10228653Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-019-22c
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummaryMAZDA CONNECTED SERVICES Frequently Asked Questions (FAQ)
Associated Products (13)Associated Documents - December 13, 2022•Document ID: 10228652Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-017-22d
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about any of the following: * Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. * Remote function(s) inoperative. - Engine Start / Stop - Door Lock / Unlock - Lights ON / OFF * MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. * If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. * If the reception is good to strong, proceed to the Repair Procedure
Associated Products (13)Associated Documents - December 7, 2022•Document ID: 10228651Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-016-22a
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummaryThere are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
Associated Products (19)Associated Documents - December 6, 2022•Document ID: 10228655Service Bulletin/Repair InstructionsEQUIPMENT; VISIBILITY:GLASS, SIDE/REAR
- Mfr Comm. #:
- SA-045-22a
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummaryThe purpose of this Service Alert is to remind dealers to keep the protective films on the piano black door garnishes attached until just before delivering the vehicle to the customer. The protective films are attached on new vehicles when shipped from the factory in order to avoid being scratched during transportation and while in dealer stock.
Associated Products (11)Associated Documents - December 2, 2022•Document ID: 10228660Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 04-005-22
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummaryFront Brake Noise Symptom 1: Some vehicles may exhibit a click noise when first moving forward or reverse from a stop OR when first applying the brakes while moving forward at slow speeds. This is caused by deteriorated grease between the brake pads and the shim, the front brake pads move upward/downward along with the brake rotors during brake application. When the vehicle moves or the brakes are applied the next time, the front brake pads move to the other side, which causes a click noise. Front Brake Noise Symptom 2: Some vehicles may exhibit the brakes having an unusual noise or vibration when applying the brake. This is caused by rust on the brake disc plateâÂÂs surface. Rear Brake Noise Symptom 1: Some vehicles may exhibit grooves in rear brake disc plate(s). This concern is mostly found on new or low mileage vehicles, when the brakes are new. The grooves may be caused through abrasion from the accumulation of metal particles from the rear brake disc plates. The metal particles get caught between the brake pads and disc plates causing groove damage. To eliminate this concern, the disc plate surface honing process has been changed to reduce metal particle formation. Rear Brake Noise Symptom 2: Some vehicles equipped with an electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. This is caused by rust on the brake disc plateâÂÂs surface. NOTE: The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise.
Associated Products (3)Associated Documents - December 1, 2022•Document ID: 10228648Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- MT-004-22
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the Check Engine Light ON with DTC P0171 (Fuel Trim too Lean) and possibly DTCs P030X (Misfire). Vehicles having this concern should use the following Inspection/Repair procedure.
Associated Products (18)Associated Documents - November 22, 2022•Document ID: 10226834Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-018-22b
- Date Added:
- December 2, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 74.00.324 or later). The system performance has been improved as follows: Ver. 74.00.324 fixes these software errors (bugs): * If the shift lever is operated quickly while displaying the CarPlayTM screen, the rear view screen may not return to the CarPlayTM screen. * When the gear position is shifted into P from R, the screen may not return to the previous condition before shifting into the R position.
Associated Products (12)Associated Documents - November 18, 2022•Document ID: 10226814Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 02-004-22a
- Date Added:
- December 2, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
Associated Products (18)Associated Documents