Mazda CX-5 Service Bulletins (2026)
75 manufacturer communications on file.
- March 18, 2026•Document ID: 11030644Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-017-26
- Date Added:
- April 3, 2026
- Manufacturer:
- MAZDA
SummaryDESCRIPTION Some customers may experience an intermittent loss of the MyMazda App remote function. Recovery The error is intermittent and may recover on it's own during a different drive cycle. Do not perform any repairs at this time. Advise the customer that Mazda is aware of the condition and is currently working on a resolution. As soon as a resolution becomes available, this Service Alert will be promptly updated and re-released. Note: Check "Messages --> Activity History" on the customer's device because the cause might be related to keys inside the vehicle, door/hood/liftgate open.........ect..
Associated Products (1)Associated Documents - March 15, 2026•Document ID: 11030638Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-015-26
- Date Added:
- April 2, 2026
- Manufacturer:
- MAZDA
SummaryDESCRIPTION Some customers may experience the following: 1. Intermittent Globe with a slash icon. The Globe with Slash icon indicates that communication between the Cockpit Domain Controller (CDC) and the Data Communication Module (DCM) has not yet been completed. This communication may take up to 90 seconds to complete. During this time, some Mazda Connect 3 functions, such as Google Assistant, will not be available. ○ Once communication is complete, the Globe with Slash icon will be replaced by the reception icon, as shown below. Recovery The system may recover on its own: After several minutes of driving. • Ignition OFF and wait approximately 5 minutes. Then ignition back ON. • REPAIR PROCEDURE If the Recovery procedure above does not resolve the issue, perform the following: 1. Disconnect the 12V battery. 2. Wait about 1 minute. 3. Reconnect the 12V battery and retest. Inform the customer that Mazda is aware of the issue and is working on a resolution. NOTE: Vehicle driving operation is not affected during this condition.
Associated Products (1)Associated Documents - March 13, 2026•Document ID: 11030642Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; UNKNOWN OR OTHER
- Mfr Comm. #:
- SA-016-26
- Date Added:
- April 3, 2026
- Manufacturer:
- MAZDA
SummaryDESCRIPTION Some customers may experience an incorrect “Sign in to network” notification, even though the customer has signed in to the network correctly. NOTE: Vehicle driving operation is not affected by this notification. Mazda Connect 3 functions are not affected by this notification. Inform the customer to ignore the notification for now and that Mazda is aware of the condition and is currently working on a resolution. As soon as a resolution becomes available, this Service Alert will be promptly updated and re-released.
Associated Products (1)Associated Documents - March 11, 2026•Document ID: 11030636Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SA-014-26
- Date Added:
- April 2, 2026
- Manufacturer:
- MAZDA
SummaryThis Service Alert supersedes the previously issued SA(s) and TSB(s) listed below: The changes are noted in Red. SA-035/24 05/31/24 DESCRIPTION There is a concern that some water pumps are being replaced that are not faulty, due to signs of a very small coolant leak from the bleed hole. This Service Alert is to inform you about the water pump sealing mechanism and the criteria if replacement is necessary or not. A mechanical seal (A) is used for the water pump. This mechanical seal can seal coolant (B) by sliding a mating ring (C) against a seal ring (D). When the sliding surface temperature of the mechanical seal is more than 248 °F (120 °C) while driving, a small amount of steam (E) is leaked and bleeds through the bleeding hole (F). After drying, the steam leaves a green coolant deposit near the water pump bleed hole (F). This is a normal condition and does not require water pump replacement. The water pump should only be replaced if there is an accumulation of crystallized coolant near the bleed hole. When you encounter a water pump with coolant seepage marks, decide to replace it or not based on the following criteria using sample photos. NOTE: During the initial period of use*, the sliding surfaces of the seals may not yet be fully settled, which can temporarily increase the amount of leakage. Continued use will allow the surfaces to settle, reducing the leakage. Replacing parts that are already settled with new ones will increase the leakage again until the new parts become conditioned. Therefore, replacement should be avoided in this initial period of use. *As a guideline, this applies to vehicles with less than 1,860 miles (3000 km) of mileage.
Associated Products (55)2026 Mazda CX-302026 Mazda CX-52026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-52023 Mazda CX-302023 Mazda CX-5+ 35 moreAssociated Documents - March 7, 2026•Document ID: 11030634Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-013-26
- Date Added:
- April 2, 2026
- Manufacturer:
- MAZDA
SummaryDESCRIPTION ADDING ODOMETER TO THE CENTER DISPLAY HOME SCREEN The 2026 Mazda CX-5 displays the odometer (mileage) on the center display rather than in the instrument cluster. The odometer and trip meter are not displayed in the instrument cluster; instead, they appear on the center display. This information can be accessed through the Efficiency application. Adding the Odometer to the Center Display Home Screen Click here to watch a step-by-step video tutorial. 1. From the Home screen, select the "Edit Home Screen" icon at the bottom right corner. 2. Hold and drag the Media content down one level. 3. Hold and drag the Efficiency content above the Media content. 4. Exit "Edit Home Screen" Note: " Driver" profiles can have unique system preference settings. When a new profile is created, the center display home screen defaults to the same initial state. This procedure can then be performed on the newly created profile.
Associated Products (1)Associated Documents - February 19, 2026•Document ID: 11029536Service CampaignELECTRICAL SYSTEM; UNKNOWN OR OTHER
- Mfr Comm. #:
- CSP04 Dlr Ltr
- Date Added:
- March 4, 2026
- Manufacturer:
- MAZDA
SummaryCustomer Service Program (CSP) 04 – Connected Services Deactivated – All applicable Mazda vehicles. There is no Repair Procedure or Warranty Information for this CSP, please read below on what to advise the customer if they inquire about this program. This is an information ONLY CSP and is not a recall. Outline of Program: Connected Services is available for all owners of current generation vehicles. Some owners may wish to remove all Connected Services from their vehicle. All current vehicles except 2026 CX-5: To deactivate the TCU (Telecommunications Unit) which removes all connected services from their vehicle, the owner must contact the Mazda Customer Experience Center (CEC). Mazda has established a procedure to deactivate (Opt-Out) Connected Services. Once the vehicle has been deactivated by the CEC, Mazda Warranty and Recalls team will add the VIN to this CSP so it displays on eMDCS giving dealers the visibility that connected services data is not available on this vehicle. 2026 CX-5 with Google Built-in: Please have the customer contact the Mazda Customer Experience Center to to deactivate (Opt-Out) Connected Services. After contacting there is an established procedure to add the VIN to CSP04 so it displays on eMDCS giving dealers the visibility that the customer has requested to Opt-Out of Connected Services. Note: The Mazda Vehicle Owner must contact the Mazda Customer Experience Center directly as Mazda dealer staff cannot verify ownership for the customer. You can contact the CEC on the customer’s behalf and transfer the phone to the owner of the vehicle to start the Opt-Out Procedure.
Associated Products (1)Associated Documents - February 3, 2026•Document ID: 11029490Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SA-006-26
- Date Added:
- March 4, 2026
- Manufacturer:
- MAZDA
SummaryThe 2026 CX-5 has new and revised features that are different from previous models and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns.
Associated Products (1)Associated Documents - January 26, 2026•Document ID: 11028133Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SA-005-26
- Date Added:
- February 3, 2026
- Manufacturer:
- MAZDA
SummaryThere are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method • B. Auxiliary Key Code Cut Method 2019 and newer models require a 10-digit key code to accurately cut keys • 5-digit codes CANNOT be provided for 2019 and newer vehicles (the traditional 5-digit code from the key tag or driver's door lock cylinder is not sufficient and will not be issued for key cutting on these models). • Only Mazda-approved key cutting machines can process these 10-digit codes. • Many older key machines do not support 10-digit codes and cannot be updated to do so. In these cases, dealers will need to purchase one of the newer Mazda-approved key cutting machines capable of handling this requirement. • For a list of current Mazda-approved machines and purchasing options, refer to the Mazda Dealer Equipment Program or view the current Mazda approved key machines below.
Associated Products (78)2026 Mazda CX-302026 Mazda CX-52026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32026 Mazda MX-52025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-5+ 58 moreAssociated Documents - January 7, 2026•Document ID: 11028095Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 09-001-26
- Date Added:
- February 3, 2026
- Manufacturer:
- MAZDA
SummaryThere are wrinkles on the leather seat cushion and/or seat back surface at PDI, when new vehicle is delivered, or when new upholstery is installed under Warranty repair. NOTE: This repair is not a permanent fix, it is meant to make new seats look their best when the vehicle is first presented to the customer. Wrinkles may not be completely removed after the repair is completed. Leather is a natural material and may develop some wrinkles due to aging and wear during normal usage.
Associated Products (33)2026 Mazda CX-302026 Mazda CX-52026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32026 Mazda MX-52025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-5+ 13 moreAssociated Documents - January 6, 2026•Document ID: 11028129Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STRUCTURE:BODY
- Mfr Comm. #:
- SA-003-26
- Date Added:
- February 3, 2026
- Manufacturer:
- MAZDA
SummaryCustomers may report that the liftgate does not open or unlatch (from closed or an ajar position). This may happen after a discharged battery or after charging a dead battery.
Associated Products (6)Associated Documents - January 6, 2026•Document ID: 11028128Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- SA-002-26
- Date Added:
- February 3, 2026
- Manufacturer:
- MAZDA
SummarySome customers may complain that the tire sidewalls are distorted or "damaged". Sidewall waviness/indentations/undulations are common on radial tires and are more noticeable on tires with taller sidewalls. The higher the tire pressure, the more noticeable the effect will be. Be sure to set the tire pressures at the recommended tire pressure on the vehicle tire label. Sidewall indentations are a cosmetic condition that does not affect the performance of the tires.
Associated Products (15)Associated Documents - January 5, 2026•Document ID: 11028127Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SA-001-26
- Date Added:
- February 3, 2026
- Manufacturer:
- MAZDA
SummarySome customers may report an odor or water in the HVAC system and upon inspection, the cabin air filter may be found to be wet.
Associated Products (78)2026 Mazda CX-302026 Mazda CX-52026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32026 Mazda MX-52025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-5+ 58 moreAssociated Documents - November 26, 2025•Document ID: 11026353Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SA-055-25
- Date Added:
- December 5, 2025
- Manufacturer:
- MAZDA
SummarySome vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern. NOTE: Before following this Service Alert repair procedure, ensure published TSBs in MGSS have been completed per model year.
Associated Products (79)2026 Mazda CX-302026 Mazda CX-52026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32026 Mazda MX-52025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-5+ 59 moreAssociated Documents - November 18, 2025•Document ID: 11026348Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SA-040-25a
- Date Added:
- December 5, 2025
- Manufacturer:
- MAZDA
SummaryA New Automatic Transmission Fluid (ATF-A7) is being used for some 2023-2026 models. ATF-A7 is an extremely low viscosity formulation with low friction to achieve best-in-class fuel economy and driving performance. For easy identification, ATF-A7 is colored Red and ATF-FZ is colored Blue. ATF-A7 includes UV-reactive dye (see "Fluorescence Example" below). There is NO interchangeability between ATF-A7 and ATF-FZ. For CX-30, Mazda3, and CX-5, some 2.5L and all 2.5T engines still use ATF-FZ. Verify the type of ATF according to what is in MGSS (TRANSMISSION/TRANSAXLE TECHNICAL DATA) or what is marked on the dipstick (see "ATF-A7 Identification" below).
Associated Products (16)Associated Documents - August 27, 2025•Document ID: 11022744Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SA-040-25
- Date Added:
- September 5, 2025
- Manufacturer:
- MAZDA
SummaryA New Automatic Transmission Fluid (ATF-A7) is being used for some 2023-2026 models. ATF-A7 is an extremely low viscosity formulation with low friction to achieve best-in-class fuel economy and driving performance. For easy identification, ATF-A7 is colored Red and ATF-FZ is colored Blue. There is NO interchangeability between ATF-A7 and ATF-FZ. For CX-30, Mazda3, and CX-5, some 2.5L and all 2.5T engines still use ATF-FZ. Verify the type of ATF according to what is in MGSS (TRANSMISSION/TRANSAXLE TECHNICAL DATA) or what is marked on the dipstick (see below).
Associated Products (16)Associated Documents