Mazda CX-30 Service Bulletins
845 manufacturer communications on file.
- October 10, 2022•Document ID: 10225730Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-019-22b
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummaryMazda Connected Services Frequently Asked Questions (FAQs)
Associated Products (17)Associated Documents - October 10, 2022•Document ID: 10225727Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-017-22c
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain about any of the following: * Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. * Remote function(s) inoperative. - Engine Start / Stop - Door Lock / Unlock - Lights ON / OFF * MAZDA CONNECT connected vehicle reception strength icon shows "X" or " "
Associated Products (17)Associated Documents - October 6, 2022•Document ID: 10225774Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-012-22
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit accumulation of dried coolant (1) around the water pipe (2). This is caused by a gap between the housing and pipe due to a press fitting during the manufacturing process. The accumulated coolant is solidified and plugs the gap in high temperature environment and the seepage is stopped and does not progress. This is normal and does not require a part replacement, clean off the dried coolant from around the pipe with a wire brush.
Associated Products (29)2022 Mazda CX-302022 Mazda Mazda32021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda Mazda22021 Mazda Mazda32021 Mazda Mazda62020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda Mazda22020 Mazda Mazda32020 Mazda Mazda62019 Mazda CX-32019 Mazda CX-52019 Mazda Mazda22019 Mazda Mazda32019 Mazda Mazda62018 Mazda CX-3+ 9 moreAssociated Documents - October 6, 2022•Document ID: 10225747Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-064-22
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummarySome customers may comlpain about an intermittent Beep sound (popping sound) every 1 ~ 2 minutes while driving. This may be cause by a software error in the navigation SD card.
Associated Products (13)Associated Documents - October 4, 2022•Document ID: 10225739Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SA-063-22
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummaryA New Automatic Transmission Fluid (ATF-A7) is being used for the 2023 Mazda3 and CX-30 with cylinder deactivation
Associated Products (2)Associated Documents - October 4, 2022•Document ID: 10225720Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-004-22f
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (17)Associated Documents - October 3, 2022•Document ID: 10225771Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-011-22
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may have a "OW ENGINE OIL LEVEL" warning message and a CHECK ENGINE light illuminated in the instrument cluster with DTC P250F:00 stored in memory, and the oil level has actually decreased to near low. * DTC P250F:00 - Engine oil level signal: engine oil level low This is caused by an oil consumption increase due to damage of the valve seals on the exhaust side. To eliminate this concern, the design of these valve seals has been modified.
Associated Products (7)Associated Documents - September 29, 2022•Document ID: 10222563Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-061-22
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummaryThe Blind Spot Monitoring (BSM) system can malfunction with the following symptoms if the rear side radar sensors are installed facing the wrong direction. - BSM system indicates vehicle on the opposite side. - i-ACTIVSENSE indicator ring will not turn green - Rear Cross Traffic Alert (RCTA) does not work - Rear side radar sensor
Associated Products (14)Associated Documents - September 28, 2022•Document ID: 10222572Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-030-22a
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the MyMazda App not communicating to the vehicle properly which may result in the condition monitor information is not refreshed or remote door lock/unlock not functioning. This is caused by a failure in communication between the telematics communication unit and the MyMazda App. To correct this issue, the control software of the telematics communication unit has been modified.
Associated Products (10)Associated Documents - September 26, 2022•Document ID: 10222564Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 01-010-22
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may experience a squeaking noise may be heard from the exhaust manifold when the idle speed drops from fast idle to normal idle speed during cold start. This is caused by a variable valve being stuck in the closed position. When returning from fast idle to normal, the stuck valve suddenly opens due to thermal change around it which causes abnormal noise. To eliminate this concern, the internal design of the exhaust manifold has been modified.
Associated Products (51)2022 Mazda CX-302021 Mazda CX-32021 Mazda CX-302020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda62019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda62018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda62017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda6+ 31 moreAssociated Documents - September 23, 2022•Document ID: 10222565Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 07-004-22
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain that after accelerating in hot weather, the A/C blows warm air for a longer time than other models. This is caused by improper control software of the PCM not allowing the A/C compressor to resume properly after acceleration. To eliminate this concern, the control software of the PCM has been modified.
Associated Products (5)Associated Documents - September 13, 2022•Document ID: 10222566Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- 08-002-22a
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. - B1126:13 - Driver-side side air bag module circuit open circuit or resistance high - B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by one or both of the following: - When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. - The DTC detection level is too sensitive. To eliminate these concerns: - The design of the connector terminals in the side air bag module has been modified for firmer contact. - The DTC detection level of the SAS control module has been optimized.
Associated Products (3)Associated Documents - September 8, 2022•Document ID: 10222553Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-004-22e
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (13)Associated Documents - September 1, 2022•Document ID: 10222577Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 16-006-22
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA04_12002 or later).
Associated Products (2)Associated Documents - August 25, 2022•Document ID: 10219229Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-004-22d
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (13)Associated Documents - August 25, 2022•Document ID: 10219228Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-017-22b
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain about any of the following: - Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. - Remote function(s) inoperative. - Engine Start / Stop - Door Lock / Unlock - Lights ON / OFF - MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. - If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. - If the reception is good to strong, proceed to the Repair Procedure.
Associated Products (13)Associated Documents - August 24, 2022•Document ID: 10218766Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 16-001-22c
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_12002 or later).
Associated Products (7)Associated Documents - August 23, 2022•Document ID: 10218723Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 01-009-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may experience a no start because the battery is discharged after the vehicle is parked for more than 8 hours. This may be caused by one or more of the following, resulting in excessive parasitic draw (dark current) on the battery. 1. The vehicle control system may not have gone to sleep because a key fob was left in the vehicle after the ignition switch was turned off and the doors were closed. This is caused by improper BCM control logic which allows a higher parasitic draw (approx. 6A) to continue for approximately 6 minutes until the vehicle control system goes into sleep mode. If the doors are operated frequently for car washing or luggage loading/unloading etc., it prevents the vehicle control system from sleeping during that time. 2. The parking lights may have been left on because the warning sound for lights on is a short ding, and it may not be noticed. 3. [With Full-Auto A/C] The climate control unit may not have gone to sleep because the hazard warning switch was pressed after the ignition was turned off. This is caused by improper control logic of the climate control unit. To correct these concerns: 1. The control software of the body control module (BCM) has been modified to shorten the time until going into the sleep mode to approximately 2 minutes. 2. The control software of the body control module (BCM) has been modified to change the lights on warning sound to a continuous one. 3. The control software of the climate control unit has been modified.
Associated Products (3)Associated Documents - August 23, 2022•Document ID: 10218777Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- SA-059-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers will report that their fuel door was stuck closed and would not open to refuel the vehicle. Follow the repair steps below unless the conditions outlined in TSB 09-019/21 - FUEL-FILLER LID PANEL IS DEFORMED are present.
Associated Products (8)Associated Documents - August 23, 2022•Document ID: 10218737Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-034-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain about a fuel gauge that fluctuates to a higher level at a stop on inclines, even after a long drive since it was fully refilled. This is caused by improper control software of the body control module (BCM). To eliminate this concern, the control software of the BCM has been modified.
Associated Products (5)Associated Documents