Mazda CX-3 Service Bulletins
275 manufacturer communications on file.
- January 21, 2021•Document ID: 10186703Service Bulletin/Repair InstructionsEQUIPMENT; VEHICLE SPEED CONTROL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-002-21-3770
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummaryIn accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
Associated Products (6)Associated Documents - January 21, 2021•Document ID: 10186698Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- 02-002-21-3769
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummarySome automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains.
Associated Products (7)Associated Documents - January 21, 2021•Document ID: 10186693Service Bulletin/Repair InstructionsWHEELS; STEERING; POWER TRAIN; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 00-001-21-3768
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummaryMazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
Associated Products (7)Associated Documents - January 20, 2021•Document ID: 10186808Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- SA-006-21
- Date Added:
- February 6, 2021
- Manufacturer:
- MAZDA
SummaryThe purpose of this Service Alert is to remind dealers to keep the protective films on the piano black door garnishes attached until just before delivering the vehicle to the customer. The protective films are attached on new vehicles when shipped from the factory in order to avoid being scratched during transportation and while in dealer stock.
Associated Products (5)Associated Documents - December 14, 2020•Document ID: 10185181Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-004-20c
- Date Added:
- January 6, 2021
- Manufacturer:
- MAZDA
SummaryIn order to ensure key code security, MNAO has restricted key code access for the new auxiliary key. This Service Alert provides information on how to obtain the 10-digit key code needed for cutting a new auxiliary key blank if all auxiliary keys are lost.
Associated Products (7)Associated Documents - December 10, 2020•Document ID: 10185052Service Bulletin/Repair InstructionsEQUIPMENT; SEATS
- Mfr Comm. #:
- 09-007-20-3674a
- Date Added:
- January 5, 2021
- Manufacturer:
- MAZDA
SummaryAt PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. Customers having this concern should have their vehicle repaired by a qualified upholstery repair specialist using the following repair procedure.
Associated Products (6)Associated Documents - November 18, 2020•Document ID: 10183607Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- MT-006-20
- Date Added:
- December 3, 2020
- Manufacturer:
- MAZDA
SummarySome customers may complain about the following MAZDA CONNECT⢠Temperature Warning message: ï· Display is too Hot. Screen performance may be decreased until it cools. The warning message displays when the MAZDA CONNECT⢠screen temperature is above 176 degrees Fahrenheit (80 degrees Celsius).
Associated Products (2)Associated Documents - November 17, 2020•Document ID: 10183601Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-036-20-3756
- Date Added:
- December 3, 2020
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit a Connectivity Master Unit (CMU), a BLUETOOTHî hands-free unit or text messaging related concerns. To improve the handling of BLUETOOTHî hands-free and/or text messaging customer concerns, Mazda created a special service and parts exchange program as of February 2010.
Associated Products (5)Associated Documents - November 10, 2020•Document ID: 10183604Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- MT-005-20
- Date Added:
- December 3, 2020
- Manufacturer:
- MAZDA
SummarySome customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary: Engine Oil Consumption Inspection Guideline 1. Record the vehicle mileage. 2. Engine at normal operating temperature, top off engine oil level to the full mark on the dipstick. 3. Ask the customer to return to the dealer after 1200 miles to recheck the engine oil level. 4. After 1200 miles, engine at normal operating temperature, check the engine oil level on the dipstick. 5. Is the engine oil level above the low mark on the dipstick? ïÃÂ÷ Yes - No repair is necessary. ïÃÂ÷ No - Proceed to MGSS online or Workshop Manual (section 01-03 NO. 16 HIGH OIL CONSUMPTION/LEAKAGE).
Associated Products (4)Associated Documents - October 28, 2020•Document ID: 10182123Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SA-071-20
- Date Added:
- November 4, 2020
- Manufacturer:
- MAZDA
SummaryCurrently, the instructions on MGSS recommend the use of Loctite 962T or equivalent when installing a SKYACTIV cylinder head, but it is no longer available. The following 3 adhesives are alternatives available as an equivalent to Loctite 962T: Loctite 272, Loctite 518 Threebond TB-1386H
Associated Products (7)Associated Documents - October 22, 2020•Document ID: 10182091Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; VISIBILITY; ELECTRICAL SYSTEM:ADAS:BLINDSPOT:SENSORS
- Mfr Comm. #:
- 00-002-20-3749
- Date Added:
- November 3, 2020
- Manufacturer:
- MAZDA
SummaryIn support of the new Mazda MX-5 and CX-3, Mazda will make available for loan on an âÂÂas-neededâ basis, a Special Service Tool (SST) to allow for the radar aiming of the blind spot monitoring (BSM) system. The BSM radar aiming is performed whenever the BSM control module, the BSM bracket or the rear bumper is replaced.
Associated Products (2)Associated Documents - October 15, 2020•Document ID: 10182122Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-070-20
- Date Added:
- November 4, 2020
- Manufacturer:
- MAZDA
SummaryAPPLE CARPLAY / ANDROID AUTO FREQUENTLY ASKED QUESTIONS (FAQ): NOTE: The following vehicles are not equipped with Apple CarPlay / Android Auto, but it can be activated using MDARS. See Activation instructions on MGSS - Infotainment - MAZDA CONNECT Updates - Apple Carplay / Android Auto MDARS Activation Instructions
Associated Products (7)Associated Documents - October 12, 2020•Document ID: 10182121Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-069-20
- Date Added:
- November 4, 2020
- Manufacturer:
- MAZDA
SummaryACCESSORY INSTRUCTIONS LOCATION: Accessory instructions can be found in the Accessory eCatalog. https://ecatalog.mazdausa.com
Associated Products (7)Associated Documents - August 18, 2020•Document ID: 10179315Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-063-20
- Date Added:
- September 3, 2020
- Manufacturer:
- MAZDA
SummaryWhen performing vehicle services such as control unit software update, control unit registration/activation, CMU log data retrieval, etc., always use the GR8 battery charger SST to maintain battery voltage.
Associated Products (7)Associated Documents - July 10, 2020•Document ID: 10177943Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR
- Mfr Comm. #:
- SA-056-20
- Date Added:
- August 5, 2020
- Manufacturer:
- MAZDA
SummarySome customers or technicians (during PDI) may have concerns with the front doors sticking (especially on hot days) and/or poor appearance, fitment, alignment or gaps with the front and rear door sash molding. These concerns may be related to the door sash molding interference between the front and rear doors.
Associated Products (4)Associated Documents