Infiniti QX60 Service Bulletins (2015)
269 manufacturer communications on file.
- February 26, 2016•Document ID: 10192751Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- ITB03051J
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION Occasionally customers may notice water vapor or fog in the headlamps. The information, illustrations, and flow chart in this bulletin are provided to help you in determining if an incident for water/condensation in the headlamps is normal or not. Infiniti?s new vehicle limited warranty does not cover physically damaged (cracked or broken) headlamps. All current headlamp assemblies are vented to the atmosphere (not sealed). - This is necessary to allow for expansion and contraction of air from temperature "variations" (warmer or colder) without damage to the headlamp. - Moisture in the air sometimes "travels" into and out of the headlamp assembly through these vents. - Certain environmental conditions may cause moisture to condense. - The fogging/cloudiness should disappear over time when the headlamp is in a dry environment. See this bulletin for further detail.
Associated Products (30)2016 Infiniti Q502016 Infiniti Q702016 Infiniti QX502016 Infiniti QX602016 Infiniti QX702016 Infiniti QX802015 Infiniti Q402015 Infiniti Q502015 Infiniti Q602015 Infiniti Q702015 Infiniti QX502015 Infiniti QX602015 Infiniti QX702015 Infiniti QX802014 Infiniti Q502014 Infiniti Q602014 Infiniti Q702014 Infiniti QX502014 Infiniti QX602014 Infiniti QX70+ 10 moreAssociated Documents - February 22, 2016•Document ID: 10192745Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB16008
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIF YOU CONFIRM The MIL is "ON" with DTC P0603 (ECM BACK UP/CIRCUIT). ACTION 1. Confirm that the battery voltage is 11 volts, or more, with the ignition ON (engine OFF, not running). 2. Erase DTC 3. Perform DTC confirmation steps in the Service Procedure. 4. Confirm 1st trip DTC P0603 is not stored. NOTE: P0603 is often the result of low battery voltage, discharged battery or battery terminal disconnections. Please see this bulletin for furtner details.
Associated Products (14)Associated Documents - February 10, 2016•Document ID: 10192737Service Bulletin/Repair InstructionsFORWARD COLLISION AVOIDANCE: SENSING SYSTEM: SONAR/ULTRASONIC; EQUIPMENT
- Mfr Comm. #:
- ITB16006
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION When diagnosing the front sonar parking sensor for potentially unwanted activation (e.g. sonar activates with no obstacle ahead), inspect the front license plate, front license plate frame and if equipped, the front license plate bracket. See page 2 for example photos. The front sonar parking sensor may activate if: The front license plate is bent outward from its bracket (there is a gap between the license plate and the bracket) OR the front license plate frame is bent or loose and is hanging outward, away from the license plate and/or bracket (there is a gap between the license plate frame and the license plate and/or bracket) OR the bracket is loose and is hanging outward, away from the bumper (there is a gap between the bracket and the bumper). If any of these conditions are found, correct it by removing the gap (straighten the license plate, straighten and/or secure the license plate frame, or secure the bracket, as it applies). - Retest the operation of the front sonar parking sensor. If the issue is not resolved, go to ASIST and the related Electronic Service Manual (ESM) for further diagnosis. See this bulletin for further detail.
Associated Products (11)Associated Documents - January 28, 2016•Document ID: 10192733Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB16007A
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION On Applied Vehicles, the torque specification for the rear final drive assembly rear mounting stud has been revised. New torque specification: 71 N-m, 7.2 kg-m, 52 ft-lbs Use the torque specification shown above when installing a rear final drive assembly. At a later date and where possible, the applicable Electronic Service Manuals will be updated with the revised specification. See this bulletin for further detail.
Associated Products (2)Associated Documents - January 15, 2016•Document ID: 10192721Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB16009
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION The function to detect the last item to trigger the vehicles theft alarm system can now be accessed with CONSULT-III plus (C-III plus). This function can be accessed by selecting: * Diagnosis (All Systems) or Diagnosis (One System). Then * BCM Then * THEFT ALM Then * Work Support Then * THEFT ALM TRG See this bulletin for further details.
Associated Products (4)Associated Documents - January 5, 2016•Document ID: 10192718Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB16005
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION The Intelligent Keys used on the various Infiniti vehicles may not be interchangeable between models and years. See this bulletin for further detail.
Associated Products (33)2016 Infiniti Q502016 Infiniti Q702016 Infiniti QX502016 Infiniti QX602016 Infiniti QX702016 Infiniti QX802015 Infiniti Q502015 Infiniti Q602015 Infiniti Q702015 Infiniti QX502015 Infiniti QX602015 Infiniti QX702015 Infiniti QX802014 Infiniti Q502014 Infiniti Q602014 Infiniti Q702014 Infiniti QX502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX80+ 13 moreAssociated Documents - January 4, 2016•Document ID: 10192715Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- ITB16004
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION The "shift lock cover" is now available as a separate part. If only the shift lock cover is needed, do not order the "Indicator Assy - Auto Transmission Control". Please see this bulletin for further details.
Associated Products (1)Associated Documents - January 4, 2016•Document ID: 10192713Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB16002
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION: When the BCM in an APPLIED VEHICLE is being replaced for any reason, all existing Intelligent Keys must be re-registered. If new Intelligent Keys are added to the existing Intelligent Keys at the same time the BCM is being replaced, the procedure in this bulletin must be followed. See this bulletin for further detail.
Associated Products (2)Associated Documents - January 4, 2016•Document ID: 10192712Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB16001
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION The tie down hook is no longer included with the jacking tools on 2015 QX60 vehicles, effective with the Applied Date and VIN shown above. Do not submit warranty claims for a missing tie down hook (a hook that was not originally supplied with the vehicle).
Associated Products (1)Associated Documents - December 16, 2015•Document ID: 10192705Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- PC420A
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryThis activity will expire on December 18th, 2015. Retailers can continue to schedule and repair vehicles eligible for this service action until close of business December 18th, 2015. Claims will be honored for RO?s opened on or before the 18th of December.
Associated Products (2)Associated Documents - December 16, 2015•Document ID: 10192704Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- PC420
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryInfiniti is conducting a Dealer Service Action to inspect, and if necessary, repalce the hood latch on certain MY2015-16 QX60 vehicles.
Associated Products (2)Associated Documents - December 10, 2015•Document ID: 10074545Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- ITB14-042A
- Date Added:
- June 22, 2016
- Manufacturer:
- INFINITI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (3)Associated Documents - November 16, 2015•Document ID: 10192681Service Bulletin/Repair InstructionsVISIBILITY
- Mfr Comm. #:
- ITB15032
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION Power moonroof initialization procedures for the Applied Vehicles have been revised. The procedure described in this bulletin differs from the procedure in the Electronic Service Manual (ESM). At a later date and where possible, the applicable ESMs will be updated with the revised procedures. Follow the procedure in this bulletin should the power moonroof in an Applied Vehicle need to be initialized. See this bulletin for further detail.
Associated Products (5)Associated Documents - November 12, 2015•Document ID: 10192673Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB09015G
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION Design and process changes have been made to improve battery voltage at dealer receipt. Our goal is to deliver vehicles to customers with a 12 volt battery in excellent condition. Proper dealership storage and maintenance of vehicle 12 volt batteries is essential to insuring good battery operating life and customer satisfaction. Dealers are responsible for maintaining vehicles in their inventory. 12 volt batteries in vehicle inventory should always be kept at a full charge to prevent excessive discharge during storage and so they are ready for delivery to customers at any time. See this bulletin for further detail.
Associated Products (41)2016 Infiniti Q702016 Infiniti QX502016 Infiniti QX702016 Infiniti QX802015 Infiniti Q402015 Infiniti Q502015 Infiniti Q602015 Infiniti Q702015 Infiniti QX502015 Infiniti QX602015 Infiniti QX702015 Infiniti QX802014 Infiniti Q502014 Infiniti Q602014 Infiniti Q702014 Infiniti QX502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti EX35+ 21 moreAssociated Documents - October 30, 2015•Document ID: 10192666Service Bulletin/Repair InstructionsPARKING BRAKE; SEAT BELTS; VEHICLE SPEED CONTROL
- Mfr Comm. #:
- ITB14059A
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIF YOU CONFIRM All "hands free" functions of the Intelligent Key (I-Key) do not work. For example, the doors will not lock or unlock when pressing either front door request switch. NOTE: - The issue of all I-Key "hands free" functions not working may occur intermittently or all the time. - The message "No Key Detected" or similar may show on the Vehicle Information Display (located in the combination meter). - All I-Key remote button functions (door lock/unlock, etc.) WILL work normally when all I-Key "hands free" functions are NOT working. ACTION 1. Inspect the I-Key?s battery on its negative contact side. 2. If excessive scratching is found, replace the battery. 3. Verify all I-Key functions (both "hands free" and remote) work properly after battery replacement. NOTE: Do NOT replace the BCM, I-Key, or other parts for the issue described under IF YOU CONFIRM, if it should occur. See this bulletin for further detail.
Associated Products (4)Associated Documents - October 14, 2015•Document ID: 10192653Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL
- Mfr Comm. #:
- ITB15028
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION For Applied Vehicles, the rear door partition seals have been deleted. These seal are no longer a standard component and should not be considered missing and should not be installed. Do not submit a warranty claim for installation of a missing partition seal. Please see this bulletin for further details.
Associated Products (1)Associated Documents - September 24, 2015•Document ID: 10192647Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB11042D
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIF YOU CONFIRM The customer states HomeLink will not operate or has improper operation. ACTIONS 1. To significantly reduce unnecessary repairs, make sure: a. The vehicle is not in "Transit Mode" (if equipped). - Not in Transit Mode: With the turn signal switch is in the OFF (center) position, turn the ignition from OFF to ON. If the turn signal indicators stay OFF (do not illuminate), the vehicle is not in Transit Mode. b. The "Extended Storage Switch" (if equipped) is in the "Customer Delivery" position (pushed in). - The Extended Storage Switch is located on the fuse block that is located in the interior of the vehicle. 2. Confirm the customer is familiar with the HomeLink programming procedure located in the vehicle?s owner?s manual. 3. Test HomeLink operation with special tool HomeLink Transmitter Tester J-41540. See this bulletin for further detail.
Associated Products (26)2016 Infiniti QX502016 Infiniti QX702015 Infiniti Q402015 Infiniti Q502015 Infiniti Q602015 Infiniti Q702015 Infiniti QX502015 Infiniti QX602015 Infiniti QX702015 Infiniti QX802014 Infiniti Q502014 Infiniti Q602014 Infiniti Q702014 Infiniti QX502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti EX352013 Infiniti G372013 Infiniti QX56+ 6 moreAssociated Documents - September 18, 2015•Document ID: 10192644Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB14016B
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIF YOU CONFIRM All of the following - The engine will not start (no crank; starter will not engage) when pushing the ignition switch, and I-Key Error message is displayed in the combination meter, and DTC B2604 (PNP/Clutch Switch) is stored, past or present. ACTION Perform adjustment of the shift control cable per the Service Procedure in this bulletin. See this bulletin for further detail.
Associated Products (2)Associated Documents - September 15, 2015•Document ID: 10192639Service Bulletin/Repair InstructionsBACK OVER PREVENTION; WHEELS; SERVICE BRAKES; LANE DEPARTURE
- Mfr Comm. #:
- ITB13039A
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION This bulletin has compiled Tire Pressure Monitor System (TPMS) and Low Tire Pressure Warning System (LTPWS) information for: - Basic diagnosing of TPMS/LTPWS systems - Radio frequency interference causing a "No Data" (C1708, C1709, C1710, C1711) condition - Sensor leaks - Moving TPMS/LTPWS wheel assemblies from one vehicle to another and TPMS/LTPWS sensor registration - Air pressure changes with altitude and ambient temperatures - Aftermarket tire sealers - Aftermarket wheels - Inflating/deflating tires with TPMS/LTPWS sensors See this bulletin for further detail.
Associated Products (53)2016 Infiniti QX502016 Infiniti QX702015 Infiniti Q402015 Infiniti Q502015 Infiniti Q602015 Infiniti Q702015 Infiniti QX502015 Infiniti QX602015 Infiniti QX702015 Infiniti QX802014 Infiniti Q502014 Infiniti Q602014 Infiniti Q702014 Infiniti QX502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti EX352013 Infiniti G372013 Infiniti QX56+ 33 moreAssociated Documents - September 11, 2015•Document ID: 10058790Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- PC-393
- Date Added:
- November 24, 2015
- Manufacturer:
- INFINITI
SummaryINFINITI: AN INVENTORY INSPECTION FOR CERTAIN VEHICLES WAS CONDUCTED AND IS NO LONGER NECESSARY TO BE PERFORMED AND THE VEHICLES CAN NOW BE RELEASED. MODEL 2015 QX60. *PE
Associated Products (2)Associated Documents