Infiniti QX56 Service Bulletins (2013)
178 manufacturer communications on file.
- June 7, 2013•Document ID: 10192191Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB98011F
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryAs part of an enhanced emissions test for Inspection & Maintenance (I/M), some States may require the System Readiness Test (SRT) status be checked. - The SRT is used to indicate whether the engine control module (ECM) has completed self diagnosis of major emissions systems and components. - In these instances the State may require completion of the SRT before permitting the emissions inspection to proceed. Refer to this Bulletin for further details.
Associated Products (63)2014 Infiniti QX702013 Infiniti EX352013 Infiniti G372013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti QX562010 Infiniti EX352010 Infiniti G372010 Infiniti M452010 Infiniti QX562009 Infiniti EX352009 Infiniti G372009 Infiniti M452009 Infiniti QX562008 Infiniti EX352008 Infiniti G35+ 43 moreAssociated Documents - May 23, 2013•Document ID: 10192184Service Bulletin/Repair InstructionsAIR BAGS; LANE DEPARTURE
- Mfr Comm. #:
- ITB13016
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIF YOU CONFIRM One or more of the following conditions: Front passenger air bag status light is ON (illuminated) with the front passenger seat empty. Front passenger air bag status light is ON (illuminated) with an adult sitting in the front passenger seat. Seat belt warning light is ON (illuminated) with the front passenger seat empty (driver seat belt is buckled). Supplemental air bag warning light is flashing but no Air Bag DTCs are stored. ACTION 1. Visually check the front passenger seat and seat rails for any structural damage. 2. Visually check the front passenger seat for any items in the seat pockets, or any items on, under, or hanging from the seat (front, back, and sides). 3. Replace the OCS control unit. 4. Perform Zero Point Rest and check for DTCs. See this bulletin for further detail.
Associated Products (3)Associated Documents - May 17, 2013•Document ID: 10052201Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- ITB13-016
- Date Added:
- June 25, 2013
- Manufacturer:
- INFINITI
SummaryINFINITI: ON THE INSTRUMENT PANEL THE AIR BAG AND SEAT BELT WARNING LIGHTS GIVE OFF AN INCORRECT INDICATION. *KB
Associated Products (13)Associated Documents - May 13, 2013•Document ID: 10192175Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB13015
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIF YOU CONFIRM: On an applied vehicle with a "CAN Gateway Module" that Multiple CAN system DTCs are present. * If the CAN Gateway Module is not configured properly, multiple CAN system DTCs can occur, as well as some components on the CAN circuit 2 and ITS-CAN may not function. ACTION: Use CONSULT-III plus (C-III plus) to manually over-write the data in the CAN Gateway Module. * DO NOT perform a "Read Configuration" of the original configuration first. See this bulletin for further information.
Associated Products (1)Associated Documents - April 4, 2013•Document ID: 10192161Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB13013
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION Improper adjustment or operation of the ASCD brake switch can cause the Automatic Speed Control Device (ASCD) to "not set" and/or DTC P0605 (ECM) to store. See this bulletin for further detail.
Associated Products (17)Associated Documents - April 4, 2013•Document ID: 10051766Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL:CRUISE CONTROL
- Mfr Comm. #:
- ITB-13-13
- Date Added:
- April 10, 2013
- Manufacturer:
- INFINITI
SummaryINFINTI: CRUISE CONTROL WILL NOT SET AND DTC P0605 IS STORED. IF A MALFUNCTION IN THE ASCD SYSTEM IS DETECTED, THE CRUISE INDICATOR MAY STAY ON AND THE SET INDICATOR MAY FLASH. *JS
Associated Products (35)2013 Infiniti JX352013 Infiniti M372013 Infiniti M562013 Infiniti QX562012 Infiniti FX352012 Infiniti FX502012 Infiniti G372012 Infiniti M352012 Infiniti M372012 Infiniti M562012 Infiniti QX562011 Infiniti EX352011 Infiniti FX352011 Infiniti FX502011 Infiniti G252011 Infiniti G372011 Infiniti M372011 Infiniti M562011 Infiniti QX562010 Infiniti EX35+ 15 moreAssociated Documents - April 3, 2013•Document ID: 10192157Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL; SEAT BELTS
- Mfr Comm. #:
- ITB13012
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION The "Lock / Unlock request buttons" that are located on the outside door handles of vehicles with Intelligent Key can be disabled (or enabled) through either the "Comfort & Conv." settings of the Audio/Visual/Navigation system, orthrough the "Combination Meter settings" depending on the vehicle model, year and trim level. NOTE: In some instances this feature may be unintentionally disabled. Please verify the status of this feature before any further diagnostic is performed. Please see this bulletin for further details.
Associated Products (19)2013 Infiniti EX352013 Infiniti G372013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti QX562010 Infiniti EX352010 Infiniti G372010 Infiniti M452010 Infiniti QX562009 Infiniti EX352009 Infiniti G372009 Infiniti M452009 Infiniti QX562008 Infiniti EX352008 Infiniti M45Associated Documents - April 3, 2013•Document ID: 10051765Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- ITB-13-12
- Date Added:
- April 10, 2013
- Manufacturer:
- INFINITI
SummaryINFINITI: LOCK/UNLOCK REQUEST BUTTON ON OUTSIDE DOOR HANDLE OUTSIDE DOOR HANDLE DOES NOT RESPOND. LOCK/UNLOCK REQUEST BUTTON LOCATED ON OUTSIDE DOOR HANDLES OF VEHICLES CAN BE DISABLED (OR ENABLED) THROUGH EITHER THE "COMFORT & CONV" SETTINGS OF THE AUDIO/VISUAL/NAVIGATION SYSTEM OR THROUGH THE "COMBINATION METER SETTINGS" DEPENDING ON THE VEHICLE MODEL, YEAR, AND TRIM LEVEL. *JS
Associated Products (144)2013 Infiniti JX352013 Infiniti M372013 Infiniti M562013 Infiniti QX562012 Infiniti FX352012 Infiniti FX502012 Infiniti G372012 Infiniti M352012 Infiniti M372012 Infiniti M562012 Infiniti QX562011 Infiniti EX352011 Infiniti FX352011 Infiniti FX502011 Infiniti G252011 Infiniti G372011 Infiniti M372011 Infiniti M562011 Infiniti QX562010 Infiniti EX35+ 124 moreAssociated Documents - March 22, 2013•Document ID: 10192149Service Bulletin/Repair InstructionsWHEELS; EQUIPMENT; POWER TRAIN; BACK OVER PREVENTION
- Mfr Comm. #:
- ITB13008
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIF YOU CONFIRM: Customers concern of a "clicking" noise coming from either left or right front/rear axles during take-off/acceleration. ACTION: Apply Molykote M77 grease (P/N 44003-7S000) to the hub bearing surfaces. NOTE: * Do not remove the axle from the hub or transmission for this bulletin * Refer to the Electronic Service Manual (ESM) for model specific torque specifications. >Please see Service procedure for 2007-2011 Versa torque specifications on page 5. See this bulletin for further detail.
Associated Products (8)Associated Documents - March 19, 2013•Document ID: 10192146Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- ITB99001A
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement. - A strut or shock absorber that should be replaced due to rod resistance/noise issues. See this bulletin for further detail.
Associated Products (70)2013 Infiniti EX352013 Infiniti G372013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti QX562010 Infiniti EX352010 Infiniti G372010 Infiniti M452010 Infiniti QX562009 Infiniti EX352009 Infiniti G372009 Infiniti M452009 Infiniti QX562008 Infiniti EX352008 Infiniti G352008 Infiniti G37+ 50 moreAssociated Documents - February 21, 2013•Document ID: 10192128Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- ITB13003
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION When the fluid of an applied vehicle's transfer assembly is being "topped off" or refilled for any reason, use only Genuine NISSAN Transfer Fluid (P/N 999MP-TF0870P). Using transfer fluid other than Genuine NISSAN Transfer Fluid or its equivalent will damage the transfer, which is not covered by the INFINITI new vehicle limited warranty. Order this item through the Infiniti Maintenance Advantage program: Phone: 877-INF-IMA1 (877-463-4621), order online via the link on www.NNAnet.com>Workspace tab>Parts and Service Section>Click on "Maintenance Advantage", or order direct at www.nissantire.com. See this bulletin for further detail.
Associated Products (3)Associated Documents - February 15, 2013•Document ID: 10192126Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- ITB11014B
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION If a CD/DVD Player incident is noted, a possible cause may be improper CD/DVD disc care, condition, or usage. This bulletin provides updated CD/DVD Player operation instructions to avoid potential incidents/customer concerns caused by improper care and usage of CD/DVD discs. To aid in solving customer concerns, use the guidelines in this bulletin when speaking to customers or inspecting incident vehicles. - Customers must not use discs that are warped, scratched, chipped, cracked, have abnormal edges or are otherwise damaged. Damaged or poor condition discs may cause the Player internal mechanism to jam or have optical pick-up errors. NOTE - Do not make a Warranty claim against a Player that will not play damaged or poor condition discs as described in this bulletin. See this bulletin for further detail.
Associated Products (25)2013 Infiniti EX352013 Infiniti G372013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti QX562010 Infiniti EX352010 Infiniti G372010 Infiniti M452010 Infiniti QX562009 Infiniti EX352009 Infiniti G372009 Infiniti M452009 Infiniti QX562008 Infiniti EX352008 Infiniti G352008 Infiniti G37+ 5 moreAssociated Documents - January 2, 2013•Document ID: 10192103Service Bulletin/Repair InstructionsBACK OVER PREVENTION
- Mfr Comm. #:
- ITB11054A
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIF YOU CONFIRM: Any of the following DTCs are stored in the ECM: - P0031 / P0051, P0032 / P0052, P0130 / P0150, P0133 / P0153, P2A00 / P2A03, P1148 / P1168 OR Any of the following DTCs are stored in the ECM as a result of one of the A/F sensors: - P0300 - P0308, P0171 / P0174, P0172 / P0175 ACTION: 1. Replace the A/F sensor that relates to the stored DTC(s) (B1 and/or B2). 2. Refer to step 7 in the SERVICE PROCEDURE to confirm if ECM reprogramming applies. 3. If it applies, reprogram the ECM. See this bulletin for further detail.
Associated Products (3)Associated Documents - December 21, 2012•Document ID: 10192101Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- ITB11005B
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION To increase tire/wheel assembly balancing accuracy, proper steps should be followed: - Make sure to use the correct size wheel centering collet (do not use a cone). - Make sure to use a flange plate and stud set to secure the tire/wheel assembly on the balancer (do not use a cup). - Perform proper wheel mounting and centering checks. See this bulletin for further detail.
Associated Products (9)Associated Documents - December 13, 2012•Document ID: 10192090Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; SERVICE BRAKES
- Mfr Comm. #:
- P2563
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryInfiniti is conducting a retailer service action to reprogram the ECM on certain specific 2012 and 2013 Infiniti QX56 vehicles to prevent the fuel pump pressure from becoming higher than design specifications and illuminating the MIL light.
Associated Products (2)Associated Documents - October 25, 2012•Document ID: 10192058Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL; VISIBILITY
- Mfr Comm. #:
- ITB12071
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION Part of the procedure to remove the glass mirror in either door mirror of an applied vehicle has been changed. Until the related Electronic Service Manuals (ESM) are amended, use the information in this bulletin. - Other than noted, all other procedural steps in the ESM remain the same. See this bulletin for further detail.
Associated Products (3)Associated Documents - October 24, 2012•Document ID: 10192056Service Bulletin/Repair InstructionsVISIBILITY; ENGINE AND ENGINE COOLING; VEHICLE SPEED CONTROL; BACK OVER PREVENTION
- Mfr Comm. #:
- ITB12070
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION The "Reverse Tilt-Down" feature will move the glass on the outside mirrors downward when the gear selector is placed in the Reverse (R) position. As the mirror glass moves downward, it may reach the end of its travel. If the mirror glass reaches the end of its travel it will make a clicking noise. The clicking noise may occur once or multiple times. IMPORTANT: - The clicking noise described above is a normal function of the mirror glass movement. - Do not replace the door mirror assembly in an attempt to repair this normal function.
Associated Products (3)Associated Documents - October 12, 2012•Document ID: 10192052Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:INTERIOR LAMPS/BULBS
- Mfr Comm. #:
- ITB12068
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION Occasionally, after a rain or a car wash, customers may notice water drops in the overhanging part of the rear combination lamp lens. - This is a normal condition. - The water drops should disappear over time when the lamp is in a dry environment. - Refer to the images on page 2 of this bulletin for examples of a normal water drop condition. - Do not replace any parts for this condition. See this bulletin for further detail.
Associated Products (3)Associated Documents