Hyundai Sonata Service Bulletins (2015)
304 manufacturer communications on file.
- February 15, 2019•Document ID: 10154679Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ENGINE
- Mfr Comm. #:
- 953 Dealer Best
- Date Added:
- March 18, 2019
- Manufacturer:
- HYUNDAI
SummaryHyundai has developed a new engine monitoring technology called a Knock Sensor Detection System (KSDS). The technology uses software innovations and leverages existing engine sensors to continuously monitor for symptoms that may precede an engine failure. Watch this video to learn more. The KSDS software continuously monitors engine vibrations for unusual patterns that develop as an engine connecting rod bearing wears abnormally that could later cause engine seizure. If vibrations caused by bearing wear start to occur, the malfunction indicator lamp will blink continuously, an audible chime will sound and the vehicle will be placed in a temporary engine protection mode with reduced power and acceleration. At that time, Diagnostic Trouble Code (DTC) P132600 will be recorded in the ECM. In addition, Hyundai will extend the warranty to 10 years and 120,000 miles (up from 100,000 miles) for original and subsequent owners of the covered vehicles for engine repairs needed because of excessive connecting rod bearing damage.
Associated Products (17)2018 Hyundai Santa Fe Sport2018 Hyundai Sonata2018 Hyundai Tucson2017 Hyundai Santa Fe Sport2017 Hyundai Sonata2016 Hyundai Santa Fe Sport2016 Hyundai Sonata2015 Hyundai Santa Fe Sport2015 Hyundai Sonata2015 Hyundai Tucson2014 Hyundai Santa Fe Sport2014 Hyundai Sonata2014 Hyundai Tucson2013 Hyundai Santa Fe Sport2013 Hyundai Sonata2012 Hyundai Sonata2011 Hyundai SonataAssociated Documents - February 7, 2019•Document ID: 10154674Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 19-01-002H-1
- Date Added:
- March 18, 2019
- Manufacturer:
- HYUNDAI
SummaryHyundai is conducting a product improvement campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, a chime will sound on certain vehicles, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
Associated Products (17)2018 Hyundai Santa Fe Sport2018 Hyundai Sonata2018 Hyundai Tucson2017 Hyundai Santa Fe Sport2017 Hyundai Sonata2016 Hyundai Santa Fe Sport2016 Hyundai Sonata2015 Hyundai Santa Fe Sport2015 Hyundai Sonata2015 Hyundai Tucson2014 Hyundai Santa Fe Sport2014 Hyundai Sonata2014 Hyundai Tucson2013 Hyundai Santa Fe Sport2013 Hyundai Sonata2012 Hyundai Sonata2011 Hyundai SonataAssociated Documents - January 30, 2019•Document ID: 10152891Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 5NP-M7Z5K-02
- Date Added:
- February 19, 2019
- Manufacturer:
- HYUNDAI
SummaryThis bulletin provides information on how to return a Hyundai HEV/PHEV/EV/Fuel Cell Lithium Battery for proper disposal and safe environmental recycling using Hyundai?s authorized vendor Kinsbursky Brothers Inc. (KBI).
Associated Products (17)2019 Hyundai Ioniq2019 Hyundai Kona2019 Hyundai Nexo2019 Hyundai Sonata2018 Hyundai Ioniq2018 Hyundai Sonata2017 Hyundai Ioniq2017 Hyundai Sonata2017 Hyundai Tucson2016 Hyundai Sonata2016 Hyundai Tucson2015 Hyundai Sonata2015 Hyundai Tucson2014 Hyundai Sonata2013 Hyundai Sonata2012 Hyundai Sonata2011 Hyundai SonataAssociated Documents - January 23, 2019•Document ID: 10152890Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 5NP-Z3A5R-02
- Date Added:
- February 19, 2019
- Manufacturer:
- HYUNDAI
SummaryThis bulletin provides the procedure to update the TCU (Transmission Control Unit) in certain vehicles (listed Below) when replacing the Dual Clutch Transmission (DCT) with updated clutch material. This bulletin also provides a method of identifying transmissions with the updated F850 clutch material.
Associated Products (9)Associated Documents - January 17, 2019•Document ID: 10152889Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 5NP-H9R6R-02
- Date Added:
- February 19, 2019
- Manufacturer:
- HYUNDAI
SummaryThe software update installs a newly developed Knock Sensor Detection System (KSDS) that detects vibrations indicating the onset of excessive connecting rod bearing wear in the engine. The KSDS is designed to alert a vehicle driver at an early stage of bearing wear before the occurrence of engine damage. If vibrations caused by bearing wear start to occur, the Malfunction Indicator Lamp (MIL) will blink continuously, an audible chime will sound, and the vehicle will be placed in Limp Home Mode. At that time, Diagnostic Trouble Code (DTC) P132600, specific to the KSDS, will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slowly and have a reduced maximum speed with RPMs limited to approximately 1800-2000 RPM. The update will be done free of charge to customers and will only involve the addition of the KSDS software update.
Associated Products (17)2018 Hyundai Santa Fe Sport2018 Hyundai Sonata2018 Hyundai Tucson2017 Hyundai Santa Fe Sport2017 Hyundai Sonata2016 Hyundai Santa Fe Sport2016 Hyundai Sonata2015 Hyundai Santa Fe Sport2015 Hyundai Sonata2015 Hyundai Tucson2014 Hyundai Santa Fe Sport2014 Hyundai Sonata2014 Hyundai Tucson2013 Hyundai Santa Fe Sport2013 Hyundai Sonata2012 Hyundai Sonata2011 Hyundai SonataAssociated Documents - January 10, 2019•Document ID: 10152825Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 5NP-E8E9D-02
- Date Added:
- February 19, 2019
- Manufacturer:
- HYUNDAI
SummaryHyundai is conducting a product improvement campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, a chime will sound on certain vehicles, and the vehicle will be placed in Limp Home Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
Associated Products (17)2018 Hyundai Santa Fe Sport2018 Hyundai Sonata2018 Hyundai Tucson2017 Hyundai Santa Fe Sport2017 Hyundai Sonata2016 Hyundai Santa Fe Sport2016 Hyundai Sonata2015 Hyundai Santa Fe Sport2015 Hyundai Sonata2015 Hyundai Tucson2014 Hyundai Santa Fe Sport2014 Hyundai Sonata2014 Hyundai Tucson2013 Hyundai Santa Fe Sport2013 Hyundai Sonata2012 Hyundai Sonata2011 Hyundai SonataAssociated Documents - December 20, 2018•Document ID: 10152868Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 5NP-R7N2J-01
- Date Added:
- February 19, 2019
- Manufacturer:
- HYUNDAI
SummaryCertain 2015MY Sonata and Santa Fe Sport vehicles with 2.0L Turbo and 2.4L engines may experience the Check Engine warning lamp illuminated with DTC P1326. Follow the procedure to inspect the vehicle and install a wire harness extension or replacement engine based on the inspection results.
Associated Products (2)Associated Documents - December 12, 2018•Document ID: 10152861Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 5NP-Q7C7X-01
- Date Added:
- February 19, 2019
- Manufacturer:
- HYUNDAI
SummaryThe warranty coverage for the engine long block has been extended to 10 years or 120,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners. Note: Service Campaign 953 must be performed prior to applying this warranty extension.
Associated Products (2)Associated Documents - December 7, 2018•Document ID: 10152859Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 5NP-W4W6L-01
- Date Added:
- February 19, 2019
- Manufacturer:
- HYUNDAI
SummaryHyundai is conducting a product improvement campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, a chime will sound on certain vehicles, and the vehicle will be placed in Limp Home Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
Associated Products (8)Associated Documents - December 7, 2018•Document ID: 10152858Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 5NP-L6Z7X-01
- Date Added:
- February 19, 2019
- Manufacturer:
- HYUNDAI
SummaryHyundai has launched a Product Improvement Campaign to perform a knock sensor software update on the subject vehicles. This campaign is being implemented to ensure the satisfaction of Hyundai customers. The software update installs a newly developed Knock Sensor Detection System (KSDS) that detects vibrations indicating the onset of excessive connecting rod bearing wear in the engine. The KSDS is designed to alert a vehicle driver at an early stage of bearing wear before the occurrence of engine damage. If vibrations caused by bearing wear start to occur, the Malfunction Indicator Lamp (MIL) will blink continuously, an audible chime will sound, and the vehicle will be placed in Limp Home Mode. At that time, Diagnostic Trouble Code (DTC) P132600, specific to the KSDS, will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slowly and have a reduced maximum speed with RPMs limited to approximately 1800-2000 RPM.
Associated Products (8)Associated Documents - November 12, 2018•Document ID: 10151896Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 5NP-S6S9Z-12
- Date Added:
- December 17, 2018
- Manufacturer:
- HYUNDAI
SummaryThis bulletin provides information related to a BMS (Battery Management System) ECU software update that must be performed after replacing a high voltage Lithium Battery in a Sonata HEV (YF HEV) or Tucson Fuel Cell Electric Vehicle (LM FCEV).
Associated Products (8)Associated Documents - November 8, 2018•Document ID: 10151889Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- 5NP-E6X6V-12
- Date Added:
- December 17, 2018
- Manufacturer:
- HYUNDAI
SummaryHyundai is conducting a product improvement campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, a chime will sound, and the vehicle will be placed in Limp Home Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
Associated Products (2)Associated Documents - November 8, 2018•Document ID: 10151888Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 5NP-A3B9D-12
- Date Added:
- December 17, 2018
- Manufacturer:
- HYUNDAI
SummaryHyundai has launched a Product Improvement Campaign to perform a knock sensor software update on the subject vehicles. The software update installs a newly developed Knock Sensor Detection System (KSDS) that detects vibrations indicating the onset of excessive connecting rod bearing wear in the engine. The KSDS is designed to alert a vehicle driver at an early stage of bearing wear before the occurrence of engine damage. If vibrations caused by bearing wear start to occur, the Malfunction Indicator Lamp (MIL) will blink continuously, an audible chime will sound, and the vehicle will be placed in Limp Home Mode. At that time, Diagnostic Trouble Code (DTC) P132600, specific to the KSDS, will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slowly and have a reduced maximum speed with RPMs limited to approximately 1800-2000 RPM.
Associated Products (2)Associated Documents - November 2, 2018•Document ID: 10151891Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 5NP-X5P5Q-12
- Date Added:
- December 17, 2018
- Manufacturer:
- HYUNDAI
SummaryThe warranty coverage for the engine long block has been extended to 10 years or 120,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners.
Associated Products (1)Associated Documents - November 2, 2018•Document ID: 10151890Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT
- Mfr Comm. #:
- 5NP-R7Q5Y-12
- Date Added:
- December 17, 2018
- Manufacturer:
- HYUNDAI
SummaryHyundai is providing extended warranty coverage to both new and used vehicle owners for engine long block assembly repairs needed due to excessive connecting rod bearing damage upon completion of Service Campaign 953. The warranty extension is for 10 years from the date of original delivery or the date of first use, or 120,000 miles, whichever occurs first.
Associated Products (1)Associated Documents - October 17, 2018•Document ID: 10147418Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 5NP-D4H4Q-11
- Date Added:
- November 13, 2018
- Manufacturer:
- HYUNDAI
SummaryCertain 2015MY Sonata vehicles with 2.0L Turbo and 2.4L engines may experience the Check Engine warning lamp illuminated with DTC P1326. Follow the procedure to inspect the vehicle and install a wire harness extension or replacement engine based on the inspection results.
Associated Products (1)Associated Documents - August 30, 2018•Document ID: 10144430Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 5NP-B9V8T-09
- Date Added:
- September 17, 2018
- Manufacturer:
- HYUNDAI
SummaryOn some Sonata (YF, LF), Sonata Hybrid (YF HEV, LF HEV), Santa Fe (NC), and Azera (HG) vehicles, a yoke noise may develop in the steering rack. This bulletin provides information on how to diagnose the yoke noise and replace the rack support yoke assembly.
Associated Products (20)2018 Hyundai Santa Fe2018 Hyundai Sonata2017 Hyundai Azera2017 Hyundai Santa Fe2017 Hyundai Sonata2016 Hyundai Azera2016 Hyundai Santa Fe2016 Hyundai Sonata2015 Hyundai Azera2015 Hyundai Santa Fe2015 Hyundai Sonata2014 Hyundai Azera2014 Hyundai Santa Fe2014 Hyundai Sonata2013 Hyundai Azera2013 Hyundai Santa Fe2013 Hyundai Sonata2012 Hyundai Azera2012 Hyundai Sonata2011 Hyundai SonataAssociated Documents - August 20, 2018•Document ID: 10144433Service Bulletin/Repair InstructionsVISIBILITY
- Mfr Comm. #:
- 5NP-T8W7X-09
- Date Added:
- September 17, 2018
- Manufacturer:
- HYUNDAI
SummaryOn certain Sonata (LF) vehicles, the left/right outside mirror may not actuate up/down and/or left/right. In these instances it is recommended to replace the outside mirror actuator only, not the entire outside mirror assembly.
Associated Products (4)Associated Documents - August 19, 2018•Document ID: 10144431Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 5NP-D2B2H-09
- Date Added:
- September 17, 2018
- Manufacturer:
- HYUNDAI
SummaryHyundai is conducting a product improvement campaign to enhance the knock sensor software on certain 2015 MY Sonata vehicles to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, a chime will sound, and the vehicle will be placed in Limp Home Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
Associated Products (1)Associated Documents - August 8, 2018•Document ID: 10144435Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 5NP-X9G4F-09
- Date Added:
- September 17, 2018
- Manufacturer:
- HYUNDAI
SummaryThis bulletin describes the proper steps to identify and correct a symptom with a "Subscription Updated" or "Loading" pop-up message shown (intermittently) after every Head Unit boot up.
Associated Products (17)2017 Hyundai Azera2017 Hyundai Elantra2017 Hyundai Ioniq2017 Hyundai Santa Fe2017 Hyundai Santa Fe Sport2017 Hyundai Sonata2017 Hyundai Tucson2017 Hyundai Veloster2016 Hyundai Azera2016 Hyundai Elantra2016 Hyundai Genesis2016 Hyundai Sonata2016 Hyundai Tucson2016 Hyundai Veloster2015 Hyundai Azera2015 Hyundai Genesis2015 Hyundai SonataAssociated Documents