Honda CR-V Service Bulletins
1,403 manufacturer communications on file.
- December 1, 2014•Document ID: 10115812Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- DLR MSG - RFP -
- Date Added:
- August 25, 2017
- Manufacturer:
- HONDA
SummaryDealer message - American Honda (AHM) would like to collect 250ml of engine coolant from certain healthy 2012-2013 CR-Vs, which fit the criteria listed below.
Associated Products (2)Associated Documents - November 28, 2014•Document ID: 10118168Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- Service Bulletin
- Date Added:
- September 29, 2017
- Manufacturer:
- HONDA
SummaryService bulletin - The Low Tire Pressure/TPMS indicator is on with VSA DTC 151-11 (low tire pressure threshold refinement) and the tire pressures were properly set to the driver?s doorjamb label. A second software update is needed for different driving conditions.
Associated Products (1)Associated Documents - November 21, 2014•Document ID: 10057165Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 11172014
- Date Added:
- April 23, 2015
- Manufacturer:
- HONDA
SummaryHONDA: 2012-2014 CR-VS: COMPLAINTS OF PARKING BRAKE INDICATOR NOT DISPLAYING. *LJ
Associated Products (3)Associated Documents - November 20, 2014•Document ID: 10118028Service Bulletin/Repair InstructionsVISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:HEATER CORE
- Mfr Comm. #:
- Service Bulletin
- Date Added:
- September 27, 2017
- Manufacturer:
- HONDA
SummaryDealer message - The heat from the driver?s side-vent is lower than the heat from the front passenger?s-side vent. The vehicle?s heater core may be partially clogged, decreasing the heater performance on the driver?s side.
Associated Products (3)Associated Documents - November 18, 2014•Document ID: 10118031Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- Service Bulletin
- Date Added:
- September 27, 2017
- Manufacturer:
- HONDA
SummaryService bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants. Affected Honda vehicles were originally sold and/or registered in the following geographic locations: Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, and the U.S. Virgin Islands.
Associated Products (35)2011 Honda Element2010 Honda Element2009 Honda Element2008 Honda Element2007 Honda Accord2007 Honda Element2007 Honda Pilot2006 Honda Accord2006 Honda CR-V2006 Honda Element2006 Honda Pilot2006 Honda Ridgeline2005 Honda Accord2005 Honda Civic2005 Honda CR-V2005 Honda Element2005 Honda Pilot2004 Honda Accord2004 Honda Civic2004 Honda CR-V+ 15 moreAssociated Documents - November 17, 2014•Document ID: 10118026Service Bulletin/Repair InstructionsPARKING BRAKE; EXTERIOR LIGHTING
- Mfr Comm. #:
- DLR MSG - RFV -
- Date Added:
- September 27, 2017
- Manufacturer:
- HONDA
SummaryDealer message - American Honda (AHM) is investigating certain 2013-2014 CR-Vs with a complaint of the rear reflectors loose or missing (part # 33505-SLJ-013 for right rear reflector assembly or 33555-SLJ-013 for left rear reflector assembly). To fully understand the cause of this condition, AHM would like to inspect the vehicle prior to your attempting a repair of any kind.
Associated Products (2)Associated Documents - November 17, 2014•Document ID: 10118025Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; PARKING BRAKE
- Mfr Comm. #:
- DLR MSG - RFV -
- Date Added:
- September 27, 2017
- Manufacturer:
- HONDA
SummaryDealer message - American Honda (AHM) is investigating certain 2012-2014 CR-Vs with a complaint of the parking brake indicator not illuminating when engaged. To fully understand the cause of this condition, AHM would like to inspect the vehicle prior to your attempting a repair of any kind.
Associated Products (3)Associated Documents - November 15, 2014•Document ID: 10118030Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- Service Bulletin
- Date Added:
- September 27, 2017
- Manufacturer:
- HONDA
SummaryService bulletin - A manufacturing error can produce over-pressurization of the driver?s (front) airbag inflator during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing an injury or fatality to vehicle occupants.
Associated Products (9)Associated Documents - November 12, 2014•Document ID: 10118182Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- Service Bulletin
- Date Added:
- September 29, 2017
- Manufacturer:
- HONDA
SummaryService bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
Associated Products (35)2011 Honda Element2010 Honda Element2009 Honda Element2008 Honda Element2007 Honda Accord2007 Honda Element2007 Honda Pilot2006 Honda Accord2006 Honda CR-V2006 Honda Element2006 Honda Pilot2006 Honda Ridgeline2005 Honda Accord2005 Honda Civic2005 Honda CR-V2005 Honda Element2005 Honda Pilot2004 Honda Accord2004 Honda Civic2004 Honda CR-V+ 15 moreAssociated Documents - November 8, 2014•Document ID: 10118181Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- Service Bulletin
- Date Added:
- September 29, 2017
- Manufacturer:
- HONDA
SummaryService bulletin - The vehicle?s battery sensor monitors the battery condition and determines the charging mode. In some cases, because of the battery condition and the customer?s driving habits, the PCM may not select the correct charge mode, resulting in a battery with a low state-of-charge. If the battery has a low state-of-charge, the engine may not start.
Associated Products (1)Associated Documents - November 8, 2014•Document ID: 10118173Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- DLR MSG - Honda
- Date Added:
- September 29, 2017
- Manufacturer:
- HONDA
SummaryDealer message - Today, November 8, 2014, American Honda is announcing a product update for 116,272 2012 CR-V vehicles. The product update addresses issues with the battery management system. The battery management system may misinterpret state-of-charge (SOC) information if the vehicle is left sitting for an extended period of time, which can cause the system to fail to charge the battery. If the condition persists, the SOC may fall below a level sufficient to start the engine.
Associated Products (1)Associated Documents - November 7, 2014•Document ID: 10120784Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- Service Bulletin
- Date Added:
- October 27, 2017
- Manufacturer:
- HONDA
SummaryService bulletin - A manufacturing error can produce over-pressurization of the passenger?s (front) airbag inflator during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could be propelled upward toward the windshield, or downward toward the front passenger?s foot well, possibly causing an injury to vehicle occupants.
Associated Products (9)Associated Documents - November 7, 2014•Document ID: 10118176Service Bulletin/Repair InstructionsPARKING BRAKE:INDICATOR LIGHT
- Mfr Comm. #:
- ENG REQ - AER141
- Date Added:
- September 29, 2017
- Manufacturer:
- HONDA
SummaryEngineering request for investigation - American Honda (AHM) is investigating certain 2012-2014 CR-Vs with a complaint of the parking brake indicator not illuminating when engaged. To fully understand the cause of this condition, AHM would like to inspect the vehicle prior to your attempting a repair of any kind.
Associated Products (3)Associated Documents - November 7, 2014•Document ID: 10118174Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- ENG REQ - AER140
- Date Added:
- September 29, 2017
- Manufacturer:
- HONDA
SummaryEngineering request for investigation - American Honda (AHM) would like to collect 250ml of engine coolant from certain healthy 2012-2013 CR-Vs, which fit the criteria listed below.
Associated Products (2)Associated Documents - November 3, 2014•Document ID: 10120772Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- DLR MSG - RFV -
- Date Added:
- October 27, 2017
- Manufacturer:
- HONDA
SummaryDealer message - American Honda (AHM) is investigating certain 2013-2014 CR-Vs with a complaint of the rear reflectors loose or missing (part # 33505-SLJ-013 for right rear reflector assembly or 33555-SLJ-013 for left rear reflector assembly). To fully understand the cause of this condition, AHM would like to inspect the vehicle prior to your attempting a repair of any kind.
Associated Products (2)Associated Documents - November 3, 2014•Document ID: 10120771Service Bulletin/Repair InstructionsPARKING BRAKE; EXTERIOR LIGHTING
- Mfr Comm. #:
- DLR MSG - RFV -
- Date Added:
- October 27, 2017
- Manufacturer:
- HONDA
SummaryDealer message - American Honda (AHM) is investigating certain 2012-2014 CR-Vs with a complaint of the parking brake indicator not illuminating when engaged. To fully understand the cause of this condition, AHM would like to inspect the vehicle prior to your attempting a repair of any kind.
Associated Products (3)Associated Documents - November 1, 2014•Document ID: 10120775Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- Service Bulletin
- Date Added:
- October 27, 2017
- Manufacturer:
- HONDA
SummaryService bulletin - The heat from the driver?s side-vent is lower than the heat from the front passenger?s-side vent. The vehicle?s heater core may be partially clogged, decreasing the heater performance on the driver?s side.
Associated Products (3)Associated Documents - October 31, 2014•Document ID: 10118199Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- Service Bulletin
- Date Added:
- September 29, 2017
- Manufacturer:
- HONDA
SummaryService bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a front passenger?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could be propelled upward toward the windshield, or downward toward the front passenger?s foot well, possibly causing an injury to vehicle occupants.
Associated Products (17)Associated Documents - October 31, 2014•Document ID: 10118198Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- Service Bulletin
- Date Added:
- September 29, 2017
- Manufacturer:
- HONDA
SummaryService bulletin - A manufacturing error can produce over-pressurization of the passenger?s (front) airbag inflator during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could be propelled upward toward the windshield, or downward toward the front passenger?s foot well, possibly causing an injury to vehicle occupants.
Associated Products (9)Associated Documents - October 31, 2014•Document ID: 10118197Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- Service Bulletin
- Date Added:
- September 29, 2017
- Manufacturer:
- HONDA
SummaryService bulletin - A small number of airbag modules with defective inflators were sold as replacement parts to replace deployed or damaged airbags. A manufacturing error can produce over-pressurization of some replacement driver?s (front) airbag inflators during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing an injury or fatality to vehicle occupants.
Associated Products (9)Associated Documents