GMC Yukon Complaints

871 consumer complaints on file.

#11742068June 4, 2026
ENGINE
The engine had a sudden loss of propulsion on the highway traveling at 70mph. It went into netural and I had to coast to the side. Power cycled and it started back up for 15 more miles, then did it again and would not go out of park. Towed to dealer. PICO L87 recall was completed prior to purchasing the vehicle. 300 miles after purchase, the engine locked up. Dealer confirmed its an L87 recall failure. Vehicle was inspected on 4/21/2026. I have been waiting on a motor for 7 weeks with no movement.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11741919June 3, 2026
ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
The contact owns a 2023 GMC Yukon. The contact stated while driving 55 mph, there was blinking on the front screen of the vehicle, impeding contact to be able to see miles per hour of vehicle, odometer, among other vehicle details the screen displays. The failure mileage was approximately 46,400.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11741740June 3, 2026
ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM
The contact owns a 2021 GMC Yukon. The contact stated that while driving approximately driving 45 MPH and turning onto an exit the vehicle suddenly reduce speed and lost power and the message "Press Start" had displayed. The contact stopped the vehicle and eventually restarted the engine and the vehicle operated as normal. The next day the vehicle was driven to the local dealer who was unable to duplicate the problem and determine the cause of the failure. The manufacturer was not yet contact regarding the failure. The failure mileage was 42,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11741660June 2, 2026
ENGINE
Post-Recall Low Oil Warning + Performance Issues on 2021 GMC Yukon Denali – Campaign 25V274000 Vehicle: 2021 GMC Yukon Denali, 6.2L V8 Recall: 25V274000 Owner: One owner since new (purchased 2021) I had recall campaign 25V274000 performed on my vehicle. This was the first low oil warning I have ever received since purchasing the SUV new in 2021. I have always followed the vehicle’s oil life monitor with no prior issues. The change oil light appeared at roughly 7,500 miles after the recall service (when I already had a service appointment scheduled). About one week later, the low oil warning came on. I had the vehicle towed to the dealership and did not drive it after the warning. Since the recall service, I have also experienced performance issues including noticeable stuttering that was really evident before I towed it in. The dealership initially agreed to a consumption test but later acted like it was not needed, said everything was fine, and were dismissive — blaming me for not following their sticker. I am concerned the recall remedy is not fully effective. Please investigate this matter. Thank you, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11741633June 2, 2026
POWER TRAIN
During normal driving conditions the vehicle had set code P18A1 in the ECM. Code set due to an internal short in one of the solenoids in the valve body assembly. This caused the vehicle to display "Limp Mode" and lose reverse gear and propulsion over 45 mph. The vehicle was parked and towed to the dealership for evaluation. Upon inspection by a certified dealer technician, it was found that a solenoid had failed and required replacing. As part of the entire valve body, the solenoid is not a serviceable part. The dealership had to replaced the entire valve body assembly per repair guidelines. Per the GM and NHTSA websites, my 2022 GMC Yukon XLT with a 10-speed transmission is not included in the recalls listed below even though the symptoms are identical. General Motors publicly acknowledged the 10‑speed transmission valve body and solenoid defects, including internal electrical and hydraulic failures, through Safety Recalls, Special Coverage programs, and Technical Service Bulletins applicable to 2020– 2022 full‑size trucks and SUVs, including the GMC Yukon. My vehicle’s model year, transmission type, failure code (P18A1), and repair align with those documented GM conditions and should be included in this recall.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11741484June 2, 2026
ENGINE
Completed the oil change requirement in the recall for the 6.2L but engine blew while driving on I-10 while doing 75mph. 50k miles. Completely left stranded on major highway with family in car and vehicle flying by. GM needs to be held accountable. Their fix is not a fix.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11741458June 2, 2026
POWER TRAIN, ENGINE
The contact owns a 2021 GMC Yukon. The contact stated that while driving at an undisclosed speed, the vehicle would independently activate Limp mode and would not accelerate past 30 MPH. In addition, the vehicle would not shift into the Reverse gear as intended. The vehicle was taken to a local dealer, where it was diagnosed with error codes: P0777 and P18A1. The vehicle was not repaired due to parts being on backorder. Upon further investigation, the contact related the failure to an Unknown NHTSA Campaign; however, the VIN was not included. The manufacturer was made aware of the failure. The failure mileage was approximately 90,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11741409June 1, 2026
ENGINE
So the ultimate failure is from a catastrophically failed crankshaft journal thrust bearing. Which could be caused from one of two things: 1) The crankshaft thrust bearings they are putting in these motors are made with inferior materials, probably cheap Chinese crap or 2) The crankshaft end play tolerance was never set properly, giving the crankshaft the ability to move forward and backward in the engine more than it was designed to. Which will over time beat up on the thrust bearing until it fails. In either case it would result in the same progressive issue showing itself. It will start as a squeak here and there. Which, as the soft thrust bearing material is unable to hold the proper oil film thickness for lubrication, will spiral into more and more heat being sent into the adjacent components, plus the buildup of metal particles being sent through the entire engine oiling system. Which will then start killing connecting rod and crankshaft bearings one by one. If the engine survived to this point, it’s now a ticking time bomb. It is either going to just seize up and not run anymore or the exciting route would be a connecting rod breaks and makes a window sized hole in the side of the engine block.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11741129May 31, 2026
ENGINE
On our way home from vacation our engine failed and stranded us. This is the second engine that has failed and the vehicle only has 30220
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11741114May 31, 2026
ENGINE
Experiencing a stuck lifter in the DFM module. After doing some research, it appears there are a bunch of other people that are dealing with the same issue. The only recall was for the 6.2L engine but not the 5.3L. It appears that both engines are experiencing the exact same issue and GM hasn’t done anything to help with it.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11740744May 28, 2026
ENGINE, POWER TRAIN
My engine with less than 5,000 miles died (engine was blown). While driving on highway engine died and wheels locked and almost caused a major accident. I had to get a tow and bill cost me 700.00. GMC is giving me the run around. Dealer stated that engine will need to be replaced. GMC is doing nothing to assist me, I have a car note with no truck GMC is the biggest scam.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11740704May 28, 2026
ENGINE
I would like to document it took 7 trips to set the monitors after a failed smog check. That is 21 time going from 55 miles a hour to coasting to 20 miles a hour. on a freeway. Three times per trip at 2:00 - 3:00 in the morning. Also my Catalytic Converter went out at 26,000 miles. It should last 70,000 - 100,000 miles or 10 years. Catalytic Convertor was replaced by dealer. Will i have to replace it every 26,000 miles?
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11740700May 28, 2026
ENGINE
Engine is misfiring. Took it into local mechanic who mentioned he has seen many similar issues and knew there was a recall for similar 2021 Yukon engine issues but for some reason this model was not included. He encouraged me to trade in the vehicle because most likely the engine would need to be replaced (or a $10,000 repair) and it was not save to continue to drive in this condition. I call GMC and they suggested I contact the NHTSA to request that this year and model be added to the recall listing for other similar Yukon engines.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11740530May 28, 2026
POWER TRAIN
The contact owns a 2021 GMC Yukon. The contact stated that after restarted the engine and the vehicle did not operate in reverse. During the failure no warning messages had displayed. The vehicle was driven to the local diagnosed that the transmissions needed to be replaced. The manufacturer was notified of the failure, but no assistance was offered. The contact was informed that the VIN was not included in the NHTSA Campaign Number: 24V797000(POWER TRAIN). The contact indicated that the vehicle had experienced that same failure listed in the recall. The failure mileage was 70,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11740294May 27, 2026
ENGINE
The contact owns a 2026 GMC Yukon. The contact stated that while driving at 65 MPH the engine seized. All the warning lights illuminated after the failure. The vehicle was towed to the local dealer, where it was diagnosed that an engine replacement was needed. The vehicle was not repaired due to the part being backordered. The manufacturer was not contacted. The failure mileage was approximately 10,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11740120May 26, 2026
ENGINE
Vehicle has 58,800 miles on it driving down highway started smoking and motor making a clanking noise.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11740113May 26, 2026
ENGINE AND ENGINE COOLING
The contact owns a 2021 GMC Yukon. The contact stated that the vehicle had a rough idle. There was an abnormal ticking and rattling sound detected. The vehicle lost oil pressure. The contact located smoke emerging from the vehicle. The engine light was illuminated. The vehicle was taken to the local dealer, where it was diagnosed with a failure with cylinder five, no compression, and bearing failure. The dealer suggested the engine be replaced. The vehicle was not repaired. The contact indicated that the failure was related to NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling) but was not included in the recall. The manufacturer was contacted who referred to the NHTSA hotline. The failure mileage was unknown.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11739081May 20, 2026
POWER TRAIN
Owner was driving at highway speeds and the vehicle experienced multiple sudden stops. After consulting with the GMC certified repair facility, the control valve body of the transmission was determined to be faulty and replaced. As a result of the sudden stop at highway speeds, the owner experienced a torn rotator cuff and could have been involved in a serious motor vehicle crash.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11738939May 20, 2026
FUEL/PROPULSION SYSTEM, ENGINE
I was driving in the left lane on [XXX] , a 4 lane interstate just outside of Cleveland when i lost engine propulsion. Engine RPMs dropped to under 1000rpm, and quit responding to throttle. I had to change lanes and coast until there was a shoulder available to stall out at while i awaited a tow. No warning lamps until i tried to restart vehicle. Engine cranked but wouldnt start. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11738914May 19, 2026
ELECTRICAL SYSTEM, POWER TRAIN, ENGINE
Ok so my first issues were with the vehicle stalling while driving in gear. Happened a few times intersections off-ramps etc…and the car would roll to a stop. Luckily no one killed. Again happened a few times. Went to dealer they “fixed”it. Then it happened a couple other times…scary shit…went to dealer then they“Fixed” it again. Happened again I didnt bring it back. By this point I was carrying a 10 millimeter wrench in the glovebox to disconnect the battery so the body computer would reset. Car would start after cycling the power from the battery terminal. And Those were my electrical problems …As far as mechanical problems I brought car in for the recall notice “ the pico test’ . Went for the recall oil change /test/per the recommendations.300 miles later car engine failure at 70 miles an hour on route [XXX] south wife driving. She started crying doesn’t want anything to do with this car. Too many incidents… safety of my family at risk. Please help. FYI i am a mechanic / car electrician [XXX] so could probably be much more descriptive if need be Tow trucks Ubers rental cars etc… shit show. Engine died April 16 so car has been at a dealer in [XXX] for 31days. I have dealer receipts and some play by play video of a few of the incidents INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0

← Back to GMC Yukon