Genesis GV80 Service Bulletins (2025)
45 manufacturer communications on file.
- June 17, 2026•Document ID: 11034026Warranty Program/ExtensionELECTRICAL SYSTEM
- Mfr Comm. #:
- L05G EM
- Date Added:
- June 23, 2026
- Manufacturer:
- GENESIS
SummaryYour vehicle may exhibit battery drain due to the Central Control Panel (CCP) not entering sleep mode. At Genesis, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, Genesis is conducting a campaign to update the Central Control Panel (CCP) Software at NO CHARGE to you.
Associated Products (2)Associated Documents - June 10, 2026•Document ID: 11033845Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 26-HA-002G TSB
- Date Added:
- June 16, 2026
- Manufacturer:
- GENESIS
SummarySome Genesis vehicles (listed below) equipped with Lambda-III 3.5T-GDI engines may exhibit reduced heater performance due to engine coolant deposits clogging the heater core. This bulletin provides instructions to verify the concern and to replace the front and rear heater core (if applicable).
Associated Products (18)Associated Documents - May 27, 2026•Document ID: 11033711Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 26-GI-002G TSB
- Date Added:
- June 6, 2026
- Manufacturer:
- GENESIS
SummaryThis bulletin provides information related to the navigation and head unit software changes introduced in the 2026 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 1st Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.
Associated Products (26)2026 Genesis G902026 Genesis GV702025 Genesis G702025 Genesis G802025 Genesis G902025 Genesis GV602025 Genesis GV702025 Genesis GV802024 Genesis G702024 Genesis G802024 Genesis G902024 Genesis GV602024 Genesis GV702024 Genesis GV802023 Genesis G702023 Genesis G802023 Genesis G902023 Genesis GV602023 Genesis GV702023 Genesis GV80+ 6 moreAssociated Documents - April 15, 2026•Document ID: 11031403Service CampaignVISIBILITY/WIPER
- Mfr Comm. #:
- 26-01-003G-1 DCS
- Date Added:
- April 21, 2026
- Manufacturer:
- GENESIS
SummaryCertain GV70 (JK1, JK1A), GV80 (JX1) and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. Technical Service Bulletin (TSB) 26-01-003G-1 provides instructions to remove the old garnish and install new parts.
Associated Products (3)Associated Documents - April 15, 2026•Document ID: 11031402Service CampaignVISIBILITY/WIPER
- Mfr Comm. #:
- 26-01-003G-1 TSB
- Date Added:
- April 21, 2026
- Manufacturer:
- GENESIS
SummaryCertain GV70 (JK1, JK1A), GV80 (JX1), and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. This bulletin provides instructions to remove the old garnish and install new parts.
Associated Products (3)Associated Documents - April 10, 2026•Document ID: 11032523OtherAIR BAGS
- Mfr Comm. #:
- DTN DL
- Date Added:
- May 8, 2026
- Manufacturer:
- GENESIS
SummaryThe National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.
Associated Products (111)2026 Genesis G702026 Genesis G802026 Genesis G902026 Genesis GV602026 Genesis GV702026 Genesis GV802026 Hyundai Elantra2026 Hyundai Elantra N2026 Hyundai Ioniq 52026 Hyundai Ioniq 5 N2026 Hyundai Ioniq 62026 Hyundai Ioniq 6 N2026 Hyundai Ioniq 92026 Hyundai Kona2026 Hyundai Nexo2026 Hyundai Palisade2026 Hyundai Santa Cruz2026 Hyundai Santa Fe2026 Hyundai Sonata2026 Hyundai Tucson+ 91 moreAssociated Documents - April 10, 2026•Document ID: 11032522OtherAIR BAGS
- Mfr Comm. #:
- DTN DCS
- Date Added:
- May 8, 2026
- Manufacturer:
- GENESIS
SummaryThe National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.
Associated Products (111)2026 Genesis G702026 Genesis G802026 Genesis G902026 Genesis GV602026 Genesis GV702026 Genesis GV802026 Hyundai Elantra2026 Hyundai Elantra N2026 Hyundai Ioniq 52026 Hyundai Ioniq 5 N2026 Hyundai Ioniq 62026 Hyundai Ioniq 6 N2026 Hyundai Ioniq 92026 Hyundai Kona2026 Hyundai Nexo2026 Hyundai Palisade2026 Hyundai Santa Cruz2026 Hyundai Santa Fe2026 Hyundai Sonata2026 Hyundai Tucson+ 91 moreAssociated Documents - April 10, 2026•Document ID: 11031317Service CampaignELECTRICAL SYSTEM
- Mfr Comm. #:
- 26-01-035G DCS
- Date Added:
- April 15, 2026
- Manufacturer:
- GENESIS
SummarySome vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Services (CCS) functions. This may be due to an occasional disconnection on Verizon's communication network. Technical Service Bulletin (TSB) 26-01-035G provides instructions to verify Connected Car Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
Associated Products (13)Associated Documents - April 10, 2026•Document ID: 11031316Service CampaignELECTRICAL SYSTEM
- Mfr Comm. #:
- 26-01-035G TSB
- Date Added:
- April 15, 2026
- Manufacturer:
- GENESIS
SummarySome vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Services (CCS) functions. This may be due to an occasional disconnection on Verizon’s communication network. Follow the procedures in this bulletin to verify Connected Car Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
Associated Products (13)Associated Documents - March 10, 2026•Document ID: 11030323Service Bulletin/Repair InstructionsLANE DEPARTURE: WARNING; LANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; EXTERIOR LIGHTING; FORWARD COLLISION AVOIDANCE: WARNINGS
- Mfr Comm. #:
- 26-AD-001G
- Date Added:
- March 30, 2026
- Manufacturer:
- GENESIS
SummarySome 2020MY and newer vehicles equipped with a front view camera may illuminate certain warning lights and trigger DTC C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: • If the front camera is not properly installed and is completely or partially detached. • In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). • Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).
Associated Products (27)2026 Genesis G702026 Genesis G802026 Genesis G902026 Genesis GV702026 Genesis GV802025 Genesis G702025 Genesis G802025 Genesis G902025 Genesis GV702025 Genesis GV802024 Genesis G702024 Genesis G802024 Genesis G902024 Genesis GV702024 Genesis GV802023 Genesis G702023 Genesis G802023 Genesis G902023 Genesis GV702023 Genesis GV80+ 7 moreAssociated Documents - January 28, 2026•Document ID: 11028325Service CampaignVISIBILITY/WIPER
- Mfr Comm. #:
- 26-01-003G DCS
- Date Added:
- February 5, 2026
- Manufacturer:
- GENESIS
SummaryCertain GV70 (JK1), GV80 (JX1) and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. Technical Service Bulletin (TSB) 26-01-003G provides instructions to remove the old garnish and install new parts.
Associated Products (3)Associated Documents - January 28, 2026•Document ID: 11028323Service CampaignVISIBILITY/WIPER
- Mfr Comm. #:
- 26-01-003G TSB
- Date Added:
- February 5, 2026
- Manufacturer:
- GENESIS
SummaryCertain GV70 (JK1), GV80 (JX1), and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. This bulletin provides instructions to remove the old garnish and install new parts.
Associated Products (3)Associated Documents - January 16, 2026•Document ID: 11027048Service CampaignELECTRICAL SYSTEM
- Mfr Comm. #:
- 25-01-090G TSB
- Date Added:
- January 6, 2026
- Manufacturer:
- GENESIS
SummaryCertain G80 (RG3) and GV80 (JX1) vehicles may exhibit battery drain due to the Central Control Panel (CCP) not entering sleep mode. This occurs when a communication error causes the touch-module control IC and MCU to repeatedly reinitialize, preventing the system from entering sleep mode. This bulletin provides instructions to perform a software update for the CCP.
Associated Products (2)Associated Documents - December 18, 2025•Document ID: 11027053Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- 25-BE-017G TSB
- Date Added:
- January 6, 2026
- Manufacturer:
- GENESIS
SummarySome GV80 (JX1) vehicles may have an inoperable horn due to exposure to moisture from the horizontal mounting position. This bulletin provides instructions to replace and vertically mount the horns.
Associated Products (3)Associated Documents - December 16, 2025•Document ID: 11027049Service CampaignELECTRICAL SYSTEM
- Mfr Comm. #:
- 25-01-090G DCS
- Date Added:
- January 6, 2026
- Manufacturer:
- GENESIS
SummaryCertain G80 (RG3) and GV80 (JX1) vehicles may exhibit battery drain due to the Central Control Panel (CCP) not entering sleep mode. This occurs when a communication error causes the touch-module control IC and MCU to repeatedly reinitialize, preventing the system from entering sleep mode.
Associated Products (2)Associated Documents - November 6, 2025•Document ID: 11025476Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- 25-BD-012H TSB
- Date Added:
- November 12, 2025
- Manufacturer:
- HYUNDAI
SummaryThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
Associated Products (105)2026 Genesis G702026 Genesis G802026 Genesis G902026 Genesis GV702026 Genesis GV802026 Hyundai Ioniq 92026 Hyundai Kona2026 Hyundai Palisade2026 Hyundai Santa Cruz2026 Hyundai Santa Fe2026 Hyundai Sonata2026 Hyundai Tucson2026 Hyundai Venue2025 Genesis G702025 Genesis G802025 Genesis G902025 Genesis GV602025 Genesis GV702025 Genesis GV802025 Hyundai Elantra+ 85 moreAssociated Documents - October 17, 2025•Document ID: 11024507Service CampaignVISIBILITY/WIPER
- Mfr Comm. #:
- 25-01-077G TSB
- Date Added:
- October 28, 2025
- Manufacturer:
- GENESIS
SummaryCertain GV70 (JK1), GV80 (JX1), and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. This bulletin provides instructions to remove the old garnish and install new parts.
Associated Products (3)Associated Documents - October 16, 2025•Document ID: 11024793Service CampaignVISIBILITY/WIPER
- Mfr Comm. #:
- 25-01-077G DCS
- Date Added:
- November 3, 2025
- Manufacturer:
- GENESIS
SummaryCertain GV70 (JK1), GV80 (JX1) and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal.
Associated Products (3)Associated Documents - September 30, 2025•Document ID: 11023693Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 25-BE-020G TSB
- Date Added:
- October 3, 2025
- Manufacturer:
- GENESIS
SummaryThis bulletin provides information related to the changes introduced in the 2025 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system as described in this TSB.
Associated Products (23)2025 Genesis G702025 Genesis G802025 Genesis G902025 Genesis GV702025 Genesis GV802024 Genesis G702024 Genesis G802024 Genesis G902024 Genesis GV602024 Genesis GV702024 Genesis GV802023 Genesis G702023 Genesis G802023 Genesis G902023 Genesis GV602023 Genesis GV702023 Genesis GV802022 Genesis G702022 Genesis G802022 Genesis GV70+ 3 moreAssociated Documents - September 24, 2025•Document ID: 11023409Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 25-ST-001G TSB
- Date Added:
- October 1, 2025
- Manufacturer:
- GENESIS
SummarySome vehicles may exhibit a rubbing type noise when turning the steering wheel. Follow the procedure in this TSB to inspect the source of the noise and, if necessary, replace the Steering Shaft Dust Cover.
Associated Products (16)Associated Documents