Ford Ranger Service Bulletins (2024)
107 manufacturer communications on file.
- August 2, 2024•Document ID: 11006443Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SSM 52772
- Date Added:
- August 16, 2024
- Manufacturer:
- FORD
SummarySome 2020-2024 F-150, 2021-2024 Bronco, and 2024 Ranger vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit a ticking/tapping or rattle type noise from the top front cover area of the engine on initial start-up after a cold soak of 6 hours or more that may last for 2-5 seconds. This may be due to a stuck internal component of the variable cam timing (VCT) unit.
Associated Products (10)Associated Documents - July 30, 2024•Document ID: 11005847Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- TSB 24-2233
- Date Added:
- August 6, 2024
- Manufacturer:
- FORD
SummarySome 2024 Ranger vehicles may exhibit a hood that requires extra effort to engage the primary latch when closing the hood. This may be due to the misalignment of the latch assembly to the hood striker. This condition does not affect the secondary latch operation and the hood will remain secured. To correct this concern, follow the Service Procedure to adjust the latch and adjust the bump stop rubbers.
Associated Products (1)Associated Documents - July 18, 2024•Document ID: 11005750Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 52727
- Date Added:
- August 6, 2024
- Manufacturer:
- LINCOLN
SummarySome 2024 Ranger/Nautilus vehicles may exhibit an inoperative global opening/closing feature. Refer to the Workshop Manual (WSM), Section 501-11 for normal diagnostics. If normal diagnostics do not resolve the issue, inform the customer that Ford is currently working on a solution for this condition.
Associated Products (2)Associated Documents - July 13, 2024•Document ID: 11005719Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 52717
- Date Added:
- August 6, 2024
- Manufacturer:
- FORD
SummarySome 2024 Ranger vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P06DA and/or P06DB stored in the powertrain control module (PCM). This may be due to a damaged oil pressure control solenoid connector C1744. Before performing normal Workshop Manual (WSM) diagnostics, perform the wiggle test and inspect this connector and wires for damage. If damage is found, repair as necesary. For claiming, use causal part 14S411 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. If no issues are found with the connector or wires, refer to WSM, Section 303-14 for normal diagnostics.
Associated Products (1)Associated Documents - June 1, 2024•Document ID: 11000953OtherUNKNOWN OR OTHER
- Mfr Comm. #:
- SAN Vol2 Issue 4
- Date Added:
- June 5, 2024
- Manufacturer:
- FORD
SummaryThe Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information
Associated Products (7)Associated Documents - May 30, 2024•Document ID: 11001112Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 52574
- Date Added:
- June 6, 2024
- Manufacturer:
- FORD
SummarySome vehicles equipped with SYNC4 may exhibit one or more of the following symptoms after all currently available accessory protocol interface module (APIM) software updates have been performed. - General system performance, stability, and intermittent system reboots. - Intermittent Wireless CarPlay or Android Auto function. - Phone related concerns with intermittent No Audio or Static. - Navigation/global positioning system (GPS) related concerns through CarPlay and Android Auto. - Alexa function consistency and stability. These symptoms may be due to the software in the APIM. Replacing the APIM will not resolve these symptoms for the customer. Before returning the vehicle to the customer, review the procedures within Workshop Manual, Section 415-00 and ensure the latest APIM software is installed. Refer to General Service Bulletin (GSB) 23-7146 for help determining the latest available level of software. IMPORTANT: some module software updates will only display as available on Ford Diagnosis and Repair System (FDRS) after prerequisite modules are updated. This may require the technician to update certain modules multiple times during the service visit, before the latest APIM software is accessible in FDRS. If symptoms continue after latest APIM software has been installed, inform customers that Ford is working on additional software enhancements which are expected to be delivered over-the-air (OTA) by Q4 2024 on F-150, F-150 Lightning, Mustang Mach-E, Mustang, Escape, Corsair, Expedition, Navigator, Bronco, Mustang, and 2023-2024 F-Super Duty. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. For all other vehicles with SYNC4, schedule a service visit for customers in October 2024, when the updated APIM software is expected to be available to dealers. Monitor OASIS for additional information.
Associated Products (55)2024 Ford Bronco2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford F-1502024 Ford F-2502024 Ford F-3502024 Ford F-4502024 Ford F-5502024 Ford F-6002024 Ford F-6502024 Ford F-7502024 Ford Mustang2024 Ford Mustang Mach-E2024 Ford Ranger2024 Ford Transit2024 Lincoln Corsair2024 Lincoln Navigator2023 Ford Bronco2023 Ford Edge+ 35 moreAssociated Documents - May 9, 2024•Document ID: 11000289Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SSM 52525
- Date Added:
- May 22, 2024
- Manufacturer:
- FORD
SummarySome 2024 Ranger vehicles equiped with a park by wire electronic shifter may exhibit a "Transmission Not In Park" message in the instrument panel cluster (IPC). This may be due to the transmission park by wire manual release being in the released position. Before performing normal Workshop Manaul (WSM) diagnostics, verify that the transmission park by wire manual release is engaged. Refer to the WSM, Section 307-05 Automatic Transmission External Controls > General Procedures.
Associated Products (1)Associated Documents - April 24, 2024•Document ID: 10254138Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SSM 52476
- Date Added:
- May 3, 2024
- Manufacturer:
- FORD
SummaryAll accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
Associated Products (394)2024 Ford Edge2024 Ford Explorer2024 Ford F-1502024 Ford F-2502024 Ford F-3502024 Ford F-4502024 Ford F-5502024 Ford F-6002024 Ford F-6502024 Ford F-7502024 Ford Mustang2024 Ford Ranger2023 Ford Bronco2023 Ford Bronco Sport2023 Ford Edge2023 Ford Escape2023 Ford Explorer2023 Ford F-1502023 Ford F-2502023 Ford F-350+ 374 moreAssociated Documents - April 19, 2024•Document ID: 10254004Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 24U04
- Date Added:
- May 2, 2024
- Manufacturer:
- FORD
SummaryCertain 2024 Model Year F-150, F-150 Lightning, F-150 Raptor, 2024 Ranger, 2024 Ranger Raptor Enhanced Pre-Delivery Inspection (PDI)
Associated Products (2)Associated Documents - April 3, 2024•Document ID: 10253552Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 52410
- Date Added:
- April 24, 2024
- Manufacturer:
- FORD
SummaryVarious vehicles have had pinpoint tests, guided routines and the Warranty and Policy Manual recentlyupdated for diagnostics and repairs on SYNC generation 3 and later applications. When performingdiagnostics and repairs on SYNC Gen 3 or later, select the diagnostics tab and search for related symptoms,DTCs and keywords. The search results will be shown in the search results pane. Read and follow allTechnical Service Bulletins (TSB), Special Service Message (SSM)s or General Service Bulletin (GSB) first if abulletin specifically addresses the vehicle concern. If there are no messages, run the appropriate diagnosticpinpoint test found in the Workshop Manual (WSM). Follow the steps in the pinpoint test. Make sure to note thetitle of the guided routine, using the correct one for the vehicle's symptom or diagnostic trouble code (DTC) iscritical. Depending on the outcome of the pinpoint test, a repair validation code (RVC) may be generated eitherin the pinpoint test or Guided Routine. If the vehicle concern still exists after following the pinpoint tests orguided routine, then a manual RVC can be generated using the RVC Assist Form. A manual RVC can only begenerated once the above process has been followed.
Associated Products (118)2024 Ford Bronco2024 Ford Bronco Sport2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford F-1502024 Ford Maverick2024 Ford Mustang2024 Ford Mustang Mach-E2024 Ford Ranger2024 Ford Transit Connect2024 Lincoln Aviator2024 Lincoln Corsair2024 Lincoln Nautilus2024 Lincoln Navigator2023 Ford Bronco2023 Ford Bronco Sport2023 Ford Edge2023 Ford Escape2023 Ford Expedition+ 98 moreAssociated Documents - March 22, 2024•Document ID: 10252640Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; SUSPENSION
- Mfr Comm. #:
- SSM 52380
- Date Added:
- April 4, 2024
- Manufacturer:
- FORD
SummarySome 2024 Ranger Raptor vehicles may exhibit a condition where the ATCM makes a clicking/ratcheting sound when turning the drive mode rotary dial to change the drive mode. Reprogramming or replacing the ATCM will not resolve this condition. Inform customers that a solution for this condition will be released via a software update delivered over-the-air (OTA) expected in Q4 2024. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in December 2024. Monitor OASIS for additional information.
Associated Products (1)Associated Documents - March 8, 2024•Document ID: 10251956Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SSM 52345
- Date Added:
- March 20, 2024
- Manufacturer:
- FORD
SummarySome 2022-2024 various Ford/Lincoln vehicles equipped with SYNC 4 may experience concern where customers are receiving an error message when trying to enroll in connected services. This may be due to the gateway module (GWM) software. To correct the concern, download and run the Transport and Factory Mode Deactivation app: under HS1 modules select BCM > Transport and Factory Mode > Download > Run. When the pop-up message appears for Change Vehicle Mode - Transport/Factory/Normal Mode, press OK. This will proceed to the Transport and Factory Mode Deactivation screen, select Unlock Vehicle Connectivity Settings (21 MY + Vehicles). A pop-up message appears noting Vehicle Is Now In Normal Mode, select OK. This will return to the Transport and Factory Mode Deactivation screen, select Exit. A final pop-up notification stating that the application is finished, select OK. For claiming, use causal part 14G490 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (43)2024 Ford Bronco2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford F-1502024 Ford F-2502024 Ford F-3502024 Ford F-4502024 Ford F-5502024 Ford F-6002024 Ford F-6502024 Ford F-7502024 Ford Mustang2024 Ford Mustang Mach-E2024 Ford Ranger2024 Ford Transit2024 Lincoln Corsair2024 Lincoln Navigator2023 Ford Bronco2023 Ford Edge+ 23 moreAssociated Documents - March 6, 2024•Document ID: 10251952Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 52335
- Date Added:
- March 20, 2024
- Manufacturer:
- FORD
SummaryFor 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
Associated Products (211)2024 Ford Bronco2024 Ford Bronco Sport2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford Explorer2024 Ford F-1502024 Ford F-2502024 Ford F-3502024 Ford F-4502024 Ford F-5502024 Ford F-6002024 Ford F-6502024 Ford F-7502024 Ford Maverick2024 Ford Mustang2024 Ford Ranger2024 Ford Transit2024 Lincoln Aviator2024 Lincoln Corsair+ 191 moreAssociated Documents - March 5, 2024•Document ID: 10251949Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:INSTRUMENT PANEL:FUEL GAUGE
- Mfr Comm. #:
- SSM 52330
- Date Added:
- March 20, 2024
- Manufacturer:
- FORD
SummarySome 2024 Ranger vehicles may exhibit a condition where the fuel gauge reads half full after re-filling while the distance to empty reading is accurate. This concern happens when the fuel tank is overfilled past 100% and the gauge will read accurately once the fuel tank reaches 99% capacity. This is normal operating characteristic and replacement or reprogramming the instrument panel cluster (IPC) or fuel pump and sender unit will not resolve this condition. Inform the customer filling the vehicle past automatic shut off of the fuel pump can cause this condition. This does not affect vehicle durability and no additional diagnosis or service is required for this condition.
Associated Products (1)Associated Documents - February 27, 2024•Document ID: 10250851Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 52300
- Date Added:
- March 5, 2024
- Manufacturer:
- FORD
SummarySome 2024 Ranger vehicles equipped with an instrument panel cluster (IPC) with a 12-inch display may have difficulty resetting the trip computer. This may be due to the IPC software. Replacement or reprogramming of the IPC will not resolve this concern. Inform customers that they can reset the trip settings by performing the following steps: Navigate to the trip computer screen. Quickly press and release the OK button to bring the Hold OK To Reset message back onto the IPC screen. While the message is displayed, quickly press and hold the OK button for 4 seconds. Inform customers that engineering is currently working on a solution for this condition expected in Q2 2024. Schedule a service visit for customers to return in Q2 2024 when a fix is available. Monitor OASIS for additional information.
Associated Products (1)Associated Documents - February 27, 2024•Document ID: 10250848Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; EQUIPMENT:ELECTRICAL:INFOTAINMENT
- Mfr Comm. #:
- SSM 52297
- Date Added:
- March 5, 2024
- Manufacturer:
- FORD
SummarySome 2024 Ranger vehicles may exhibit a condition in the trailer setup menu of the center display screen, where the TBC gain setting adjustment is visible when the vehicle is not equipped with TBC from the factory. This may be due to the accessory protocol interface module (APIM) software. Reprogramming or replacing the APIM will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q4 2024. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in December 2024. Monitor OASIS for additional information.
Associated Products (1)Associated Documents - February 26, 2024•Document ID: 10250846Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 52294
- Date Added:
- March 5, 2024
- Manufacturer:
- FORD
SummarySome 2024 Ranger vehicles may exhibit a concern with up to a 10 second delay loading off road mode when using the drive mode control on the center console. This may be due to the software in the accessory protocol interface module (APIM). Reprogramming or replacing the APIM will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q2 2025. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in June 2025. Monitor OASIS for additional information.
Associated Products (1)Associated Documents - February 26, 2024•Document ID: 10250845Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 52293
- Date Added:
- March 5, 2024
- Manufacturer:
- FORD
SummarySome 2024 Ranger vehicles may exhibit various center display screen concerns where the center display screen goes black, parts of the screen turn black, turns blue, turns off, or flashes/flickers white when navigating various menu's on the center display screen. When this happens, the rear camera functions normally. This may be due to the software in the accessory protocol interface module (APIM). Reprogramming or replacing the APIM will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q2 2025. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in June 2025. Monitor OASIS for additional information.
Associated Products (1)Associated Documents - February 26, 2024•Document ID: 10250844Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- SSM 52292
- Date Added:
- March 5, 2024
- Manufacturer:
- FORD
SummarySome 2024 Ranger vehicles may exhibit a concern with the audio starting to play from the phone speakers after the audio source is switched from Apple CarPlay to radio, then back to Apple CarPlay. This may be due to the software in the accessory protocol interface module (APIM). Reprogramming or replacing the APIM will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q2 2025. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in June 2025. Monitor OASIS for additional information.
Associated Products (1)Associated Documents - February 26, 2024•Document ID: 10250843Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- SSM 52291
- Date Added:
- March 5, 2024
- Manufacturer:
- FORD
SummarySome 2024 Ranger vehicles may exhibit a condition with the keyboard disappearing and not allowing more than two letters to be selected when searching for a contact in the SYNC Phone List. This may be due to the software in the accessory protocol interface module (APIM). Reprogramming or replacing the APIM will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q4. Software will update automatically if vehicle connectivity is enabled in the vehicles settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in December 2024. Monitor OASIS for additional information.
Associated Products (1)Associated Documents