Ford F-250 Service Bulletins (2025)
123 manufacturer communications on file.
- September 17, 2025•Document ID: 11023296Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 25-2412
- Date Added:
- September 23, 2025
- Manufacturer:
- FORD
SummarySome of the vehicles listed in the Model statement above may exhibit an incorrectly illuminated malfunction indicator lamp (MIL) with cylinder injection pulse offset DTCs P2B11, P2B13, P2B15, P2B17, P2B19, P2B1B, P2B1D, and/or P2B1F stored in the powertrain control module (PCM). The vehicle may also exhibit a slight running rough condition at idle. This may be due to incorrect learned values in the PCM from operating the vehicle at altitudes greater than 2500 feet (762 meters) above sea level. This condition does not affect vehicle drivability or durability.
Associated Products (12)Associated Documents - September 16, 2025•Document ID: 11023294Service Bulletin/Repair InstructionsVISIBILITY/WIPER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54223
- Date Added:
- September 23, 2025
- Manufacturer:
- FORD
SummarySome 2024-2025 F-150/F-Super Duty vehicles may exhibit an inoperative front passenger window when operated from the driver master window control switch with diagnostic trouble code (DTC) U2013:23 stored in the driver door module (DDM). This may be due to the software level of the DDM. To correct this condition, reprogram the DDM using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 14B291 and labor operations 12651D and 12651D4.
Associated Products (10)Associated Documents - September 15, 2025•Document ID: 11023206Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SSM 54218
- Date Added:
- September 18, 2025
- Manufacturer:
- FORD
SummarySome 2025-2026 F-Super Duty vehicles built on 10-Jun-2025 and through 11-Aug-2025 may exhibit the passenger side register not blowing cold air when commanded. This may be due to the heating, ventilation and air conditioning (HVAC) module calibration of the actuator. Download and run the "HVAC - Climate Control System Actuators Calibration" application with the Ford Diagnosis and Repair System (FDRS) and retest. If the concern remains, refer to the Workshop Manual (WSM), Section 412-00 for normal diagnostics. For claiming use causal part 19980 and labor operations 12651D and 12651D4. If this condition is encountered, enter a vehicle identification number (VIN) and click the "Submit Global Concern Report (GCR)" link at the upper right of the Professional Technician System (PTS) "Vehicle ID" screen. Fill out the GCR form, referencing this article number in the report.
Associated Products (8)Associated Documents - September 12, 2025•Document ID: 11023203Service Bulletin/Repair InstructionsFUEL/PROPULSION SYSTEM
- Mfr Comm. #:
- SSM 54215
- Date Added:
- September 18, 2025
- Manufacturer:
- FORD
SummarySome 2019-2026 F-Super Duty vehicles equipped with a 6.7L engine may require various repairs and/or maintenance to the fuel system where quick release couplings are utilized, such as the secondary fuel filter. The Workshop Manual (WSM), Section 310-00 > General Procedures > Quick Release Coupling has been updated to include videos and instructions of proper disconnect/connect steps involving the Type 27 quick release couplings.
Associated Products (32)2026 Ford F-2502026 Ford F-3502026 Ford F-4502026 Ford F-5502025 Ford F-2502025 Ford F-3502025 Ford F-4502025 Ford F-5502024 Ford F-2502024 Ford F-3502024 Ford F-4502024 Ford F-5502023 Ford F-2502023 Ford F-3502023 Ford F-4502023 Ford F-5502022 Ford F-2502022 Ford F-3502022 Ford F-4502022 Ford F-550+ 12 moreAssociated Documents - September 10, 2025•Document ID: 11023139Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE
- Mfr Comm. #:
- TSB 25-2420
- Date Added:
- September 16, 2025
- Manufacturer:
- FORD
SummarySome of the vehicles listed in the Model statement above built with minor feature code AAZNQ or AAZNS (gross vehicle weight rating ÝGVWR¨ 9,900 lb. or 10,000 lb. pounds) may exhibit an incorrectly illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P20EE stored in the powertrain control module (PCM). This may be due to the calibration in the PCM. This condition does not affect vehicle drivability or durability. To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS).
Associated Products (8)Associated Documents - September 4, 2025•Document ID: 11022906OtherVISIBILITY/WIPER
- Mfr Comm. #:
- SSM 54193
- Date Added:
- September 8, 2025
- Manufacturer:
- FORD
SummarySome 2024-2025 Mustang Mach-E/F-150/F-Super Duty vehicles equipped with 360 degree camera may exhibit a distorted or blurry 360 degree camera image in the center display screen but the rear view camera image is operating correctly. To restore the 360 degree camera image, download and run the "IPMA - Reset the Image Processing Module A (IPMA) Calibration Data" application using the Ford Diagnosis and Repair System (FDRS) scan tool. Then download and run the "IPMA - 360 Degree View Camera Alignment" application. Inform customers that they can continue to drive the vehicle and engineering is currently working on a software solution for this condition that is expected by the end of 2025. Replacement or reprogramming of the IPMA will not resolve this condition. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available.
Associated Products (12)Associated Documents - August 27, 2025•Document ID: 11022272Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54173
- Date Added:
- September 2, 2025
- Manufacturer:
- FORD
SummarySome 2023-2025 F-Super Duty vehicles may exhibit a no crank/no start or intermittent no crank/no start with multiple warning indicators and DTC U0100 stored in the anti-lock brake system (ABS), audio front control module (ACM) and power steering control module (PSCM). This may be due to an incorrectly tightened ground 113 (G113). Inspect G113 for proper connection and tighten to 12 Nm (8.9 ft-lb). If the condition remains after tightening G113, continue with normal diagnostics. Refer to Workshop Manual, Section 303-06 Starting System outside of this article. For claiming, use causal part 12A581 and labor operations 12650D and 12650D45WD.
Associated Products (12)Associated Documents - August 27, 2025•Document ID: 11022271Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54172
- Date Added:
- September 2, 2025
- Manufacturer:
- FORD
SummarySome 2023-2025 F-Super Duty vehicles may exhibit multiple warning indicators with DTCs U0252, U0137, U0199, U0438 stored in the body control module (BCM), image processing module A (IPMA), power steering control module (PSCM), instrument panel cluster (IPC) and/or inoperative power windows and locks. This may be due to an incorrectly tightened ground 201 (G201). Inspect G201 for proper connection, locating tab insertion, and tighten to 8 Nm (6 lb-ft). If the condition remains after tightening G201, continue with normal Workshop Manual diagnostics outside of this article. For claiming, use causal part 14A005 and labor operation MT14A005SSM up to 1.0 hours.
Associated Products (12)Associated Documents - August 22, 2025•Document ID: 11022152Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 54160
- Date Added:
- August 26, 2025
- Manufacturer:
- FORD
SummarySome 2023-2025 F-Super Duty vehicles may exhibit a "Hill Start Assist Unavailable" and/or "Parking Brake Limited Function" message at vehicle start-up with diagnostic trouble codes (DTCs) U0151, U023A, U0159, and/or U0146 stored in the anti-lock brake system (ABS) module. These DTCs and/or U0415 may also be present in various other modules related to "invalid data received from the ABS control module". This may be due to the software in the ABS module. To correct the condition, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 2C219 and labor operation 2219D and 2219D44.
Associated Products (12)Associated Documents - August 14, 2025•Document ID: 11021975Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; VISIBILITY/WIPER
- Mfr Comm. #:
- SSM 54137
- Date Added:
- August 19, 2025
- Manufacturer:
- FORD
SummaryVarious 2021-2025 Ford and Lincoln vehicles equipped with the rear camera on demand feature may exhibit "Please Check Surroundings For Safety" or "Full View Not Available" messages when the rear camera button is pressed and the vehicle is not in reverse. Inform customers this condition is considered normal operation and does not affect vehicle durability because the full rear view camera image can only be shown when the vehicle is in reverse. No additional diagnosis or service is required for this condition.
Associated Products (73)2025 Ford Bronco Sport2025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford F-2502025 Ford F-3502025 Ford F-4502025 Ford F-5502025 Ford Maverick2025 Ford Ranger2025 Ford Transit2025 Lincoln Aviator2025 Lincoln Corsair2025 Lincoln Navigator2024 Ford Bronco Sport2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford Explorer+ 53 moreAssociated Documents - August 6, 2025•Document ID: 11021801Service Bulletin/Repair InstructionsVISIBILITY/WIPER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54115
- Date Added:
- August 12, 2025
- Manufacturer:
- FORD
SummarySome 2023-2025 F-150 and F-Super Duty vehicles equipped with minor feature code B2DAC may exhibit an inoperative rear passenger window. To confirm a vehicle is built with a certain minor feature code, review the build information by clicking "Additional Information" under Vehicle Information or double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). This may be due to an open diode in the window switch. To correct the condition, replace the window switch of the affected window. If the condition persists, continue with normal diagnostics outside of this article. Refer to Workshop Manual, Section 501-11. For claiming, use causal part 14529 and labor operation 14529A of the Service Labor Time Standards (SLTS) Manual.
Associated Products (15)Associated Documents - July 29, 2025•Document ID: 11021358Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54090
- Date Added:
- August 4, 2025
- Manufacturer:
- FORD
SummarySome 2021-2025 Ford and Lincoln vehicles equipped with SYNC4/Digital Experience may exhibit an unsuccessful telematics control unit module (TCU) software update or software activation during a universal serial bus (USB) update. This may be due to the vehicle connectivity setting being disabled.
Associated Products (67)2025 Ford Bronco2025 Ford Bronco Sport2025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford F-2502025 Ford F-3502025 Ford F-4502025 Ford F-5502025 Ford Maverick2025 Ford Mustang2025 Ford Mustang Mach-E2025 Ford Ranger2025 Ford Transit2025 Lincoln Aviator2025 Lincoln Corsair2025 Lincoln Nautilus2025 Lincoln Navigator2024 Ford Bronco+ 47 moreAssociated Documents - July 26, 2025•Document ID: 11021212OtherUNKNOWN OR OTHER
- Mfr Comm. #:
- 25P21
- Date Added:
- August 2, 2025
- Manufacturer:
- FORD
SummaryCertain 2025 Model Year Super Duty and Escape Vehicles A/C Compressor Inspection Some of the affected vehicles with 10,000 miles or less may experience an internal failure of the Air Conditioning (A/C) compressor that can cause loss of A/C performance or function. Upon loss of A/C performance or function, there may be an audible squeal if the A/C compressor seizes causing the drive belt to slip on the A/C compressor pulley.
Associated Products (5)Associated Documents - July 18, 2025•Document ID: 11020894Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- TSB 25-2322
- Date Added:
- July 24, 2025
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 25-2200 to update the parts list to add the new camshaft and tappet service kit and add F-650/F-750. Some of the vehicles listed in the Model statement above may exhibit an upper engine ticking or tapping noise at idle. Customers may also report experiencing rough engine performance, engine misfire, or a malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0301-P0308 in the powertrain control module (PCM). This may be due to camshaft and/or valve tappet having excess wear within the engine assembly.
Associated Products (50)2025 Ford E-3502025 Ford E-4502025 Ford F-2502025 Ford F-3502025 Ford F-4502025 Ford F-5502025 Ford F-6502025 Ford F-7502024 Ford E-3502024 Ford E-4502024 Ford F-2502024 Ford F-3502024 Ford F-4502024 Ford F-5502024 Ford F-6502024 Ford F-7502023 Ford E-1502023 Ford E-2502023 Ford E-3502023 Ford E-450+ 30 moreAssociated Documents - July 15, 2025•Document ID: 11020888Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STEERING
- Mfr Comm. #:
- SSM 54052
- Date Added:
- July 24, 2025
- Manufacturer:
- FORD
SummarySome 2023-2025 F-Super Duty vehicles may display an error during replacement of the SCCM that contains the following message: "Reprogramming has failed, would you like to retry?". If this error is present, the SCCM will not complete PMI and may store diagnostic trouble codes (DTC) U2100 and/or U2101 in the SCCM. This may be due to a concern with the compatibility of the software with a hardware change in the SCCM. To correct the condition, download and run the "SCCM - Steering Column Control Module (SCCM) Configuration" application in the Ford Diagnosis and Repair System (FDRS). Inform customers that although the PMI is incomplete, there is no affect on vehicle performance. Customers can continue to drive the vehicle. To make sure the vehicle correctly receives the latest SCCM software, engineering is currently working on a solution for this condition that is expected in late Q3 2025. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the software becomes available.
Associated Products (12)Associated Documents - July 2, 2025•Document ID: 11020414Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- SSM 54008
- Date Added:
- July 8, 2025
- Manufacturer:
- FORD
SummarySome 2021-2025 F-150 non-Lightning, 2023-2025 F-Super Duty, 2024-2025 Ranger, and 2025 Explorer vehicles may exhibit a perceived improper functioning fog lamp(s). Customers may describe fog lamps blinking, turning on or off, or flashing. If the vehicle is equipped with cornering lamps, this may be normal function. Under certain conditions and inputs, either lamp might turn on or off independently to aid visibility during cornering. This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. For additional cornering lamp information, refer to the Owner's Manual and/or Workshop Manual (WSM), Section 417-01.
Associated Products (20)2025 Ford Explorer2025 Ford F-1502025 Ford F-2502025 Ford F-3502025 Ford F-4502025 Ford F-5502025 Ford Ranger2024 Ford F-1502024 Ford F-2502024 Ford F-3502024 Ford F-4502024 Ford F-5502024 Ford Ranger2023 Ford F-1502023 Ford F-2502023 Ford F-3502023 Ford F-4502023 Ford F-5502022 Ford F-1502021 Ford F-150Associated Documents - June 30, 2025•Document ID: 11020080Service Bulletin/Repair InstructionsPOWER TRAIN; VEHICLE SPEED CONTROL
- Mfr Comm. #:
- SSM 53994
- Date Added:
- July 2, 2025
- Manufacturer:
- FORD
SummarySome 2023-2025 F-Super Duty vehicles may exhibit a no crank/no start with diagnostic trouble code (DTC) U0100 in various modules. This condition may be due to the ground connection at G113. Inspect G113 for proper connection and tighten to 12 +/- 1.8 Nm. If condition remains after tightening G113, continue with normal diagnostics. Refer to Workshop Manual, Section 303-06 Starting System.
Associated Products (12)Associated Documents - June 25, 2025•Document ID: 11020042Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE
- Mfr Comm. #:
- SSM 53972
- Date Added:
- July 2, 2025
- Manufacturer:
- FORD
SummarySome 2023-2025 F-Super Duty vehicles equipped with a 6.7L engine may require replacement of the air conditioning compressor due to various concerns. Workshop Manual (WSM), Section 412-00 has been updated with improved removal and installation service procedure steps.
Associated Products (12)Associated Documents - June 25, 2025•Document ID: 11020044Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE
- Mfr Comm. #:
- SSM 53973
- Date Added:
- July 2, 2025
- Manufacturer:
- FORD
SummarySome 2021-2024 Edge/Nautilus, 2021-2025 Bronco/Bronco Sport/E-Series/Escape/Corsair/Expedition/Navigator/Explorer/Aviator/F-150/F-Super Duty/Mustang/Ranger, and 2022-2025 Maverick vehicles may require an A/C compressor clutch assembly replacement be performed for various concerns. Workshop Manual (WSM), Section 412-00 Removal and Installation has been updated to eliminate the need to remove and install the A/C compressor to change out the A/C Compressor clutch assembly.
Associated Products (102)2025 Ford Bronco2025 Ford Bronco Sport2025 Ford E-3502025 Ford E-4502025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford F-2502025 Ford F-3502025 Ford F-4502025 Ford F-5502025 Ford Maverick2025 Ford Mustang2025 Ford Ranger2025 Lincoln Aviator2025 Lincoln Corsair2024 Ford Bronco2024 Ford Bronco Sport2024 Ford E-350+ 82 moreAssociated Documents - June 24, 2025•Document ID: 11020051Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 53980
- Date Added:
- July 2, 2025
- Manufacturer:
- FORD
SummarySome 2023-2025 F-Super Duty vehicles may exhibit multiple warning indicators with DTCs U0252, U0137, U0199, U0438 stored in the body control module (BCM), image processing module A (IPMA), power steering control module (PSCM), instrument panel cluster (IPC) and/or inoperative power windows and locks. This may be due to an incorrectly tightened ground 201 (G201). Inspect G201 for proper connection, locating tab insertion, and tighten to 8 +/- 1.2 Nm. If the condition remains after tightening G201, continue with normal Workshop Manual diagnostics.
Associated Products (12)Associated Documents