Ford Bronco Service Bulletins (2022)
281 manufacturer communications on file.
- March 7, 2023•Document ID: 10233688Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 51415
- Date Added:
- April 4, 2023
- Manufacturer:
- FORD
SummaryCustomers who neutral (4-wheel flat) tow a 2021-2022 Bronco equipped with a 2.7L engine or a 2022-2023 Bronco Raptor may report an inconsistent brake assist when a supplemental braking system has been installed. This may result from supplemental brake system set-up that does not account for the vehicles anti-lock brake (ABS) module entering sleep mode after a pre-determined period of time following vehicle shut-down. This functionality was necessary to prevent a battery drain from occurring. Enhanced software has been developed to keep the ABS module in a consistent sleep state when the vehicle enters neutral tow mode. For vehicles that meet this criterion, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use casual part 2C219.
Associated Products (3)Associated Documents - March 3, 2023•Document ID: 10233579Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 22-2411
- Date Added:
- April 4, 2023
- Manufacturer:
- LINCOLN
SummarySome 2022 Explorer/Aviator/Bronco vehicles built on or before 9-Aug-2022 and equipped with a 10R60 automatic transmission may exhibit a harsh 7-6 gear downshift. This may be caused by the A clutch piston return spring snap ring becoming dislodged. To correct the condition, follow the Service Procedure to replace the front support assembly and A clutch components.
Associated Products (3)Associated Documents - March 2, 2023•Document ID: 10233656Service Bulletin/Repair InstructionsBACK OVER PREVENTION:SOFTWARE
- Mfr Comm. #:
- SSM 51407
- Date Added:
- April 4, 2023
- Manufacturer:
- FORD
SummarySome 2021-2022 Ford and Lincoln vehicles equipped with SYNC 4 may experience an error message during the gateway module (GWM) software update application which states Procedure Unsuccessful- GetConfigDataFromGIVIS. This may be the result of a server related concern. To correct the condition, download and run the Ford Diagnosis and Repair System (FDRS) application GWM-Read the Gateway Module A (GWM) Configuration Data application. When the application completes, refresh and re-attempt the GWM-Gateway Module A (GWM) Software Update application. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (15)Associated Documents - March 2, 2023•Document ID: 10233576Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- TSB 22-2392
- Date Added:
- April 4, 2023
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles may exhibit a charging system fault message displayed in the instrument panel cluster (IPC) after water fording in muddy water. This may be the result of mud accumulation inside the generator causing it to fail. To resolve the concern, follow the Service Procedure to replace the generator and install a revised generator shield onto the vehicle.
Associated Products (2)Associated Documents - February 22, 2023•Document ID: 10232479Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD; EQUIPMENT
- Mfr Comm. #:
- SSM 51377
- Date Added:
- March 4, 2023
- Manufacturer:
- FORD
Summary2021-2023 Bronco vehicles are equipped with a smart windshield wiper motor, which has the capability of sensing load of the wiper blades coming across the windshield glass. As a result of this operational characteristic/design, the operation may not be what is expected in certain conditions. The vehicle is programmed with protection features to prevent damage to the wiper motor in case of overheating, operation with dry windshields, or obstructions to the wiper blade (snow, ice, etc.). In such conditions, the wiper motor will temporarily reduce its speed and/or reduce area of cleaning until the condition is no longer present.
Associated Products (3)Associated Documents - February 22, 2023•Document ID: 10232478Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR; EQUIPMENT
- Mfr Comm. #:
- SSM 51376
- Date Added:
- March 4, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 Bronco vehicles may exhibit a creak/pop type noise when any of the side doors are opened and closed. This may be due to incorrect door installation, alignment and/or incorrect tightening of the two bolts which hold the door to the vehicle body. To correct this condition, inspect for and address any damage to the door and/or latch components, then remove and reinstall the suspect door following the instructions located in the Digital Owners Manual, Removable Vehicle Components > Removable Doors > Removing and Installing the Doors. In this section you ll also find a detailed tutorial video of the process. If the noise persists, perform the Front/Rear Door Alignment procedure located in the Workshop Manual (WSM), Section 501-03 Body Closures.
Associated Products (3)Associated Documents - February 14, 2023•Document ID: 10232419Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SSM 51358
- Date Added:
- March 4, 2023
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles may encounter a concern of the A/C working intermittently and DTC P0532 stored in the PCM. If this symptom is exhibited have the technician inspect connector C1062 at the pressure transducer for corrosion and/or terminal fretting. The pins in this connector may be worn creating the intermittent A/C operation. Technicians can perform a wiggle test at this connector to duplicate the issue. If the concern can be duplicated with a wiggle test, replace the pigtail service connector and the pressure transducer sensor and install dielectric grease inside both to prevent reoccurrence.
Associated Products (2)Associated Documents - February 6, 2023•Document ID: 10232486Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- TSB 23-2032
- Date Added:
- March 4, 2023
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles may exhibit a whistle noise below the lower left windshield area at the bottom of the A-pillar. This may be due to a missed body sealer application at the factory. To correct this condition, follow the Service Procedure to reseal the affected body seam.
Associated Products (2)Associated Documents - January 25, 2023•Document ID: 10230774Service Bulletin/Repair InstructionsVISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:ROOF AND PILLARS
- Mfr Comm. #:
- TSB 23-2013
- Date Added:
- January 31, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 Bronco vehicles equipped with a factory soft top roof may experience snow or sand accumulation on the vehicles interior during a strong storm with high winds. To correct this condition, follow the Service Procedure to retrofit the soft top assembly.
Associated Products (3)Associated Documents - January 23, 2023•Document ID: 10230778Service Bulletin/Repair InstructionsVISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:ROOF AND PILLARS
- Mfr Comm. #:
- TSB 23-2024
- Date Added:
- January 31, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 Bronco vehicles equipped with a factory soft top roof may exhibit a headliner that is detaching from the soft top material. This may be due to the factory installation process. To correct this condition, follow the Service Procedure to reattach the headliner or replace
Associated Products (3)Associated Documents - January 12, 2023•Document ID: 10230772Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- TSB 23-2006
- Date Added:
- January 31, 2023
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco may encounter a sta-bar disconnect service required message in the instrument panel cluster and a warning light illuminated with any of the following diagnostic trouble codes (DTCs) stored in the chassis control module (CHCM): C103A, C1A99, C1B03, C1B07, C1B14 and/or B1A67. To correct the condition, follow the Service Procedure to address water intrusion and reprogram the CHCM.
Associated Products (2)Associated Documents - January 6, 2023•Document ID: 10230784Service Bulletin/Repair InstructionsVISIBILITY:SUN/MOON ROOF ASSEMBLY
- Mfr Comm. #:
- SSM 51287
- Date Added:
- January 31, 2023
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a soft top roof may experience a strut that has detached from the soft top frame. It is not possible to reinstall one of these struts once they become detached from the frame. If this occurs, a service strut must be ordered which will arrive with a compression bracket which maintains the exact strut length required for installation. For installation instructions, refer to the Workshop Manual, Section 501-18A. The larger, rear struts are available by ordering (service part number: M2DZ-78515A60-B). The smaller, front struts are available by ordering (service part number: M2DZ-78515A59-B). Each part number contains 1 strut.
Associated Products (3)Associated Documents - December 16, 2022•Document ID: 10228876Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 51261
- Date Added:
- January 6, 2023
- Manufacturer:
- FORD
SummarySome Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Associated Products (145)2023 Ford Bronco2023 Ford Bronco Sport2023 Ford E-1502023 Ford E-2502023 Ford E-3502023 Ford Expedition2023 Ford Explorer2023 Ford F-1502023 Ford Maverick2023 Ford Mustang2023 Ford Mustang Mach-E2023 Ford Ranger2023 Ford Transit2023 Lincoln Aviator2023 Lincoln Navigator2022 Ford Bronco2022 Ford Bronco Sport2022 Ford E-1502022 Ford E-2502022 Ford E-350+ 125 moreAssociated Documents - December 14, 2022•Document ID: 10228746Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 22-2371
- Date Added:
- January 5, 2023
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a MT88 manual transmission may experience a rotational scraping noise in ambient temps below 10C (50F) and after a cold soak with the transmission in neutral, 1st and/or 2nd gear and clutch engaged. The noise may go away as the transmission warms up. This may be due to the 5th and 6th gear synchronizer rings. To correct the condition, follow the Service Procedure to replace the 5th and 6th gear synchronizer rings.
Associated Products (2)Associated Documents - December 13, 2022•Document ID: 10228800Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT:ELECTRICAL:WIRELESS CHARGER/CRADLE
- Mfr Comm. #:
- TSB 22-2485
- Date Added:
- January 5, 2023
- Manufacturer:
- FORD
SummarySome 2020-2021 Expedition/Navigator, 2020-2022 F Super Duty/Explorer, 2021-2022 Bronco/Corsair/Escape/Bronco Sport, 2022 Maverick vehicles may exhibit the wireless charger inoperative or poor performance when using some Apple iPhone models that use MagSafe wireless charging including iPhone 12 and 13. This may be due to limited compatibility with the wireless accessory charging module (WACM). To correct the condition, follow the Service Procedure to update the WACM. Note: The WACM software is designed to improve the compatibility between some Apple MagSafe charging iPhones, including iPhone 12 and 13 models, and the Ford Qi wireless charging module.
Associated Products (30)2022 Ford Bronco2022 Ford Bronco Sport2022 Ford Escape2022 Ford Explorer2022 Ford F-1502022 Ford F-2502022 Ford F-3502022 Ford F-4502022 Ford F-5502022 Ford Maverick2022 Lincoln Corsair2021 Ford Bronco2021 Ford Bronco Sport2021 Ford Escape2021 Ford Expedition2021 Ford Explorer2021 Ford F-1502021 Ford F-2502021 Ford F-3502021 Ford F-450+ 10 moreAssociated Documents - December 8, 2022•Document ID: 10228960Service Bulletin/Repair InstructionsBACK OVER PREVENTION:SOFTWARE
- Mfr Comm. #:
- 22OTA22-PU0925
- Date Added:
- January 7, 2023
- Manufacturer:
- FORD
SummaryPriority Update 22-PU0925-HAZ-FLH for 2021-2022 Bronco vehicles is now available. Quality improvements include: - improvement to engine stop/start and hazard light interaction. - improvement to ignition chime duration during Neutral tow mode. - improvement to zone lighting 12V battery drain.
Associated Products (2)Associated Documents - December 1, 2022•Document ID: 10228842Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 51227
- Date Added:
- January 5, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit noises coming from the brake pedal while applying and/or releasing the brake pedal or while the vehicle is off without brake pedal application. A single click and/or clunk may be heard during brake pedal application and again on brake pedal release and is considered normal. Clicking may also be heard while the vehicle is off, and without the brake pedal being applied. The clicking heard with the vehicle off is due to the EBB going through the normal shut-down process. The amount of noise will vary between EBB modules and replacement of the EBB module is not expected to reduce the noises.
Associated Products (3)Associated Documents - November 23, 2022•Document ID: 10226941Service Bulletin/Repair InstructionsPOWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); UNKNOWN OR OTHER
- Mfr Comm. #:
- TSB 22-2447
- Date Added:
- December 2, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator and diagnostic trouble codes (DTCs) C05D9:19 and/or C05D9:99 stored in the all-wheel drive (AWD) module and inoperative AWD system. These DTCs maybe setting due to a low battery state of charge. To correct the condition, follow the Service Procedure to verify the battery condition and reprogram the AWD module.
Associated Products (2)Associated Documents - November 18, 2022•Document ID: 10226768Service Bulletin/Repair InstructionsBACK OVER PREVENTION:SOFTWARE
- Mfr Comm. #:
- SSM 51212
- Date Added:
- November 30, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a 2.7/3.0L engine may experience a loss of the go over any terrain (GOAT) mode and/or differential locking function when two diagonal wheels lose traction simultaneously while the other two wheels maintain traction. Diagnostic trouble code (DTC) U0415 may be set in several modules. The issue should correct itself after the vehicle is driven on flat ground and over 28 MPH for a few minutes. This may be due to the software within the anti-lock brake system module (ABS). To correct this condition, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use casual part 2C219.
Associated Products (2)Associated Documents - November 17, 2022•Document ID: 10227497Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 2122OTA22PU1010M
- Date Added:
- December 8, 2022
- Manufacturer:
- FORD
SummaryPriority Update 22-PU1010-MIL-LT for 2021-2022 Model Year Bronco vehicles is now available. Quality Improvements Include: Improvements to neutral tow and EBB interaction, improvements to ESC-OFF switch not reacting, improvement to MIL lights triggering when doors are removed, Improvement to calibration of brake fluid viscosity algorithm to prevent false DTC detection at cold weather.
Associated Products (2)Associated Documents