CAN-AM Spyder Service Bulletins
234 manufacturer communications on file.
- March 31, 2014•Document ID: 10083537Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:TURN SIGNAL:FLASHER UNIT
- Mfr Comm. #:
- ARTICLE 66269
- Date Added:
- October 26, 2016
- Manufacturer:
- CAN-AM
SummaryTECHNICAL SERVICE TIP (TST): ON 2014 MODELS ONLY THE FLASHER BLINK MAY BE FASTER THAN NORMAL FOR A CERTAIN TIME. THIS SITUATION IS CAUSED BY A CALIBRATION ISSUE THAT IS EASY TO RESOLVE. THE SOLUTION IS THE RECALIBRATE THE CLUSTER FOLLOWING THE STEPS MENTIONED IN THE ARTICLE.
Associated Products (1)Associated Documents - March 31, 2014•Document ID: 10083533Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION:SWITCH
- Mfr Comm. #:
- 77572
- Date Added:
- October 26, 2016
- Manufacturer:
- CAN-AM
SummaryTECHNICAL SERVICE TIP (TST): 2014 ROADSTERS MAY HAVE A PROBLEM WITH THE IGNITION SWITCH: 1) THE ONES DETAILLED IN THE WARRANTY BULLETIN 2014-2 (UNABLE TO TURN KEY IN IGNITION SWITCH OR UNABLE TO REMOVE KEY FROM IGNITION SWITCH); OR 2) OTHERS SUCH AS UNABLE TO OPEN SEAT, UNABLE TO OPEN FRONT CARGO AND POSITION LIGHTS INTERMITTENTLY TURNING OFF WHEN MOVING THE KEY IN THE IGNITION SWITCH.
Associated Products (1)Associated Documents - March 31, 2014•Document ID: 10118136Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:STARTER ASSEMBLY:SOLENOID
- Mfr Comm. #:
- Article 77592
- Date Added:
- September 27, 2017
- Manufacturer:
- CAN-AM
SummaryArticle: The bracket retaining the clutch and line pressure solenoids may be incorrectly installed on certains models. This condition will cause the clutch to slip under load when the engine has reached the normal operating temperature. The solution is to remove the clutch cover and reinstall correctly the retaining bracket.
Associated Products (1)Associated Documents - March 27, 2014•Document ID: 10118137Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION:SWITCH
- Mfr Comm. #:
- Bulletin 2014-2
- Date Added:
- September 27, 2017
- Manufacturer:
- CAN-AM
SummaryWarranty bulletin 2014-2 adressing two problems: a) Possible deffective ignition switch. The failure may include unable to turn key in ignition switch or unable to remove key from ignition switch. The solution is to replace the ignition switch if the number of the key tag is found on the list; b) Fast flasher blink rate. The multifunction gauge cluster requires re-calibration.
Associated Products (1)Associated Documents - March 24, 2014•Document ID: 10118135Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- Article 77579
- Date Added:
- September 27, 2017
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST): BRP has received reports of SE6 1330 engines stalling when being shifted after being restarted. This situation is caused by a software issue.
Associated Products (1)Associated Documents - February 21, 2014•Document ID: 10055098Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SE-5
- Date Added:
- April 9, 2014
- Manufacturer:
- CAN-AM
SummaryBRP MC: WHEN ENGINE IS AT OPERATING TEMPERATURE AND HAS DIFFICULTY OR FAILS TO SHIFT AT ALL, THE OIL PRESSURE REGULATOR ASSEMBLY NEEDS CHECKING OR THE STEEL SLEEVE IS NOT PRESSED IN. MODEL 2013 SE5. *PE
Associated Products (1)Associated Documents - January 31, 2014•Document ID: 10185872Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- E01-10-14
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummarySpecial repair needed at PDI
Associated Products (1)Associated Documents - January 31, 2014•Document ID: 10055287Service Bulletin/Repair InstructionsPOWER TRAIN:CLUTCH ASSEMBLY
- Mfr Comm. #:
- BRP-2013-9
- Date Added:
- May 5, 2014
- Manufacturer:
- CAN-AM
SummaryBRP MOTORCYCLE: INFORMATION ON WARRANTY CAMPAIGN REGARDING A POSSIBLE REPAIR ISSUE OF OIL LEAK ON CLUTCH COVER AND SEALING PROCEDURE, ON SOME MOTORCYCLES. MODEL 2014 SPYDER RT SE6. *PE
Associated Products (1)Associated Documents - January 30, 2014•Document ID: 10185880Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A2013-ST
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummaryUpper belt guard falling off.
Associated Products (1)Associated Documents - January 23, 2014•Document ID: 10185881Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE
- Mfr Comm. #:
- A71523
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummaryFront fuse box covers replacement. Update ECM software.
Associated Products (1)Associated Documents - January 23, 2014•Document ID: 10185877Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B2012-14
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummaryECM Software update. (optional).
Associated Products (2)Associated Documents - January 23, 2014•Document ID: 10185876Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- B2013-9
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummarySeal the front fuse boxes. Update ECM software. Replace upper belt guard retaining screws.
Associated Products (1)Associated Documents - January 23, 2014•Document ID: 10055286Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS; STRUCTURE:FRAME AND MEMBERS; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- WC-2013-9
- Date Added:
- May 5, 2014
- Manufacturer:
- CAN-AM
SummaryCAN-AM MOTORCYCLE: WARRANTY CAMPAIGN INFORMATION REGARDING SEAL OF FRONT FUSE BOXES (WATER INFILTRATING EITHER OF FRONT FUSE BOXES), UPDATING ECM SOFTWARE (A LIMP HOME MODE MAY BE TRIGGERED WHEN ENGINE HAS STARTED, REPLACE UPPER BELT GUARD RETAINING SCREWS (THE BELT GUARD NOT SECURED PROPERLY BY RETAINING SCREWS. MODEL 2013 SPYDER. *PE
Associated Products (1)Associated Documents - January 23, 2014•Document ID: 10055109Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SB-2012-8
- Date Added:
- April 10, 2014
- Manufacturer:
- CAN-AM
SummaryBRP: SOME MOTORCYCLES EXPERIENCE DAMAGE TO THROTTLE BODY ACTUATOR, LEADING TO LIMP HOME MODE OR FAULT CODES WHEN STARTING ENGINE; THE TCM AND ECM SOFTWARE NEEDS UPDATING DUE TO SENSITIVE CALIBRATION WARNING DISPLAY IN CLUSTER; MIDDLE SIDE RUBBER PANELS GROMMETS FALLS OFF AFTER REMOVAL AND INSTALLING, MULTIPLE TIMES, PANEL. *PE
Associated Products (2)Associated Documents - January 23, 2014•Document ID: 10055107Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SB-2012-14
- Date Added:
- April 10, 2014
- Manufacturer:
- CAN-AM
SummaryROADSTER: FOR SOME MOTORCYCLES, INFORMATIONAL PROCEDURE IS PROVIDED REGARDING THE ECM SOFTWARE UPDATE, WHICH IS OPTIONAL AND NOT UNDER WARRANTY. *PE
Associated Products (2)Associated Documents - January 23, 2014•Document ID: 10055106Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS
- Mfr Comm. #:
- SB-2014-0001
- Date Added:
- April 10, 2014
- Manufacturer:
- CAN-AM
SummaryBRP: ON SOME MOTORCYCLES, NEED TO HAVE THE FRONT FUSE BOX COVERS REPLACED WITH AN IMPROVED COVER IN PRODUCTION AND ALSO, UPDATE ECM SOFTWARE (P1614, HI TEMP LAMPS, LIMP HOME MODE). *PE
Associated Products (2)Associated Documents - December 23, 2013•Document ID: 10124114Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER
- Mfr Comm. #:
- Posting 12-23
- Date Added:
- November 17, 2017
- Manufacturer:
- CAN-AM
SummaryPosting informing the community that a solution has been found for issue regarding the cluster fuel level indicator. B.U.D.S. Has an update for this model and a bulletin will be released in a near future.
Associated Products (1)Associated Documents - December 20, 2013•Document ID: 10107192Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER
- Mfr Comm. #:
- POSTING 12-20
- Date Added:
- June 20, 2017
- Manufacturer:
- CAN-AM
SummaryPOSTING DISCUSSING THE TWO RECALLS POSTED ON TRANSPORT CANADA AND NHTSA CONCERNING THE FUEL VAPOR CANISTER VENT HOSE TO BE REPLACE OR RE-ROUTE AND FUEL CAP REPLACEMENT BECAUSE THE FUEL CAP MAY NOT FIT ONTO THE FUEL TANK FILTER NECK.
Associated Products (5)Associated Documents - December 20, 2013•Document ID: 10124115Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- Bulletin 2012-6
- Date Added:
- November 17, 2017
- Manufacturer:
- CAN-AM
SummaryUpdate of a posting regarding bulletin 2012-6 about possible water infiltration in radio module
Associated Products (3)Associated Documents - October 25, 2013•Document ID: 10129605Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HOOD
- Mfr Comm. #:
- Article 10-25(2)
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) informing dealers that BRP has noticed an increase in claims for the RT hood actuator switch. Switch inspection reveals the contact points inside the switch are exposed to high amperage. This causes an intermittent or permanently bad contact. The dealers are informed to inspect the hood actuator itself to see if the lever it pushes against is in-line and not obstructed. This could also happen if the front cargo is over packed and the pressure pressing up against the mechanism is beyond what the actuator can push and the switch gets too much amperage.
Associated Products (4)Associated Documents