BMW of North America, LLC (BMW) is recalling certain 2006-2011 3 Series Sedan (324i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi), 2006-2012 3 Series Sportswagon (325xi, 328i, 328xi), and 2009-2011 3 Series Sedan (335d) vehicles. The original steering wheel may have been replaced with a sport or M-sport steering wheel equipped with an inflator that can explode during deployment.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
BMW of North America, LLC (BMW) is recalling certain 2006-2011 323i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi and M3, 2007-2011 328i xDrive, 335i xDrive and 335is and 2009-2011 335d vehicles. The wiring and electrical connectors for the system that controls air flow for the heating and air conditioning system may overheat.
BMW of North America LLC (BMW) is recalling certain model year 2006 325i, 325xi, 330i, 330xi sedans and 325xi sports wagons, model year 2007 328i, 328xi, 335i, 335xi sedans and 328i and 328xi sports wagons, model year 2006-2007 525i, 525xi, 530i, 530xi, 550i sedans and 530xi sports wagons, model year 2006 760i sedans, model year 2006-2007 750i, 750Li, and 760Li sedans, and model year 2006 X5 sports activity vehicles, equipped with certain seat types. The front passenger seat occupant detection mat that determines if and how the passenger frontal air bag should deploy in a crash may fatigue and develop cracks which could lead to a system failure.
BMW is recalling certain model year 2008-2012 1-Series coupes and convertibles manufactured December 2007 through September 2011; and 2007-2011 3-Series coupes and convertibles manufactured March 2007 through October 2011; 2007-2011 3-Series sedans manufactured March 2007 through October 2011; 2007-2011 3-Series sports wagons manufactured March 2007 through June 2011; and 2009-2011 Z4 vehicles manufactured March 2009 through June 2011. In February 2013, BMW recalled 504,545 vehicles. In July 2013, BMW informed the agency that it was adding 1-Series, 3-Series, and Z4 vehicles, representing an additional 12,094 vehicles. The total number of vehicles being recalled is now 516,791. The connector for the positive battery cable connector and the corresponding terminal on the fuse box may degrade over time. Over time, the high current flow and heat from electrical resistance may lead to a breakage of the connection, and a loss of electrical power to the vehicle.
The vehicle underwent a BMW recall repair involving the blower motor wiring, completed at an authorized BMW dealership. Immediately after the recall repair, the blower motor began operating intermittently. The system turns on and off while driving. The blower motor function can be temporarily restored by physically moving the wiring harness behind the glove box in the area where the recall repair was performed. Upon inspection, the wiring in the repair area appears to have been cut and spliced, with sections exposed and not properly insulated. The intermittent failure appears directly linked to movement of this wiring harness. The dealership was informed of the issue and recommended replacing the blower motor. However, the blower motor was functioning properly prior to the recall repair. The symptoms began immediately after the recall service. This condition presents a potential electrical safety concern and loss of HVAC functionality while driving. Photos documenting the wiring condition are available. I am requesting review of this recall repair to determine whether it was performed correctly and whether corrective action is required.
No injuries · No fire · No crash
The coating on the angel.eye wiring is made to deteriorate (environmental purposes) but leads to shorting out. Now my angel eyes don't turn on. Wiring needs to be replaced. Could possibly cause a fire I would assume as the live wires have no coating. Multiple forums talk about this issue and lots of drivers experience this. It is a hazzard and possible fire instigator the same as the blower motor wiring which does have a recall.
No injuries · No fire · No crash
The battery light would come on randomly when using the AC. We just took the car out for a 30 minute drive and parked in the garage. When we went back out to get something out of the car 10 minutes later, the car was smoking. We popped the trunk and the battery was on fire! I researched if there were recalls of faulty wiring and came across an article that mentioned this happening when the AC was on. It also mentioned issues with PCV valve heater recalls. After we bought this car, we noticed burn marks around the area near the battery when we replaced it. We wonder if the same thing happened to them but not as much damage. One recall involves the heater for the positive crankcase ventilation (PCV) valve, and the other recall involves wiring and electrical connectors in the system that controls air flow for heating and air conditioning. Can we get help from a BMW dealer to fix this issue? Please advise. Thank you.
Vehicles equipped with the Xenon Headlight option that have spent time in warmer climates have very poor quality wiring inside the headlight itself, whose insulation degrades and falls off, exposing bare copper that shorts, causes lighting faults, and disables headlights. This happened in my own car, the driver side headlight Daytime Running Light just stopped working one day, first with no fault codes, then eventually fault codes started appearing as more parts of the headlight stopped working, including the low-beam while driving at night. Obviously the headlights ceasing to work randomly is extremely unsafe on roadways at night, like what happened in my case, but beyond that, wiring shorting inside the headlight can causes electrical fires as well. The vehicle is available for inspection upon request, and has not yet been inspected by the manufacturer, due to testimonials I have heard from many other owners of cars with the same headlights, that BMW dealers and BMWNA are refusing to help at all with this issue. As previously stated, warning lamps did not initially appear, but as more of the wiring insulation began to degrade headlight fault codes did eventually appear.
No injuries · No fire · No crash
The contact owns a 2007 BMW 335I. The contact stated that while driving at 50 MPH, the vehicle stalled with the yellow check engine warning light displayed on the instrument panel. Due to the failure, the vehicle behind him came to a screeching halt to avoid causing a major accident. Multiple attempts to restart the vehicle failed, resulting in the vehicle being towed to an independent mechanic. The mechanic determined the failure to be a defective high-pressure fuel pump. The dealer nor the manufacturer had yet to be notified of the failure. The vehicle had yet to be repaired. The failure mileage was approximately 177,000.
No injuries · No fire · No crash