Audi A5 Service Bulletins
4,447 manufacturer communications on file.
- September 20, 2013•Document ID: 10121371Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- A911308 2028190-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 11-28 dated December 9, 2011. Customer is inquiring about retrofitting the MMI system with a language pack or map database outside of factory-available options.
Associated Products (38)Associated Documents - September 20, 2013•Document ID: 10121321Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- A011330 2027082-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 24 number 12-28 dated April 24, 2012. MIL on. DTC P0234 (Turbo/Super Charger Overboost Condition) is stored in the engine control module, J623 (address word 01). No other DTCs are stored. DTC P0234 can be set inadvertently by the software application. DTC P0234 can be set with an actual cause in combination with loss of engine power and low/uneven engine performance, based on charge pressure control.
Associated Products (12)Associated Documents - September 16, 2013•Document ID: 10228324Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01132920332232
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryThe programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
Associated Products (37)Associated Documents - September 16, 2013•Document ID: 10225003Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- 01132920332232
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryThe programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
Associated Products (37)Associated Documents - September 16, 2013•Document ID: 10221976Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01132920332232
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryThe programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
Associated Products (37)Associated Documents - September 16, 2013•Document ID: 10243780Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition53
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (264)Associated Documents - September 16, 2013•Document ID: 10121320Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- A011329 2033223-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 13-73 dated March 7, 2013. The engine warning light is on after engine replacement. The engine is not running roughly. However, the engine control module, J623 (01), is storing one or more of the following engine misfire fault codes: DTCs P0300 - P0304. The fault codes occur at light load, between 8% and 14% accelerator pedal position. The programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
Associated Products (32)Associated Documents - September 14, 2013•Document ID: 10243916Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- A5S5QUSPEC2013
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryCommunication Tightening Specifications
Associated Products (2)Associated Documents - September 13, 2013•Document ID: 10121342Service Bulletin/Repair InstructionsWHEELS; STEERING
- Mfr Comm. #:
- A481354 2028220-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 48 number 12-30 dated June 25, 2012. Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have shown that there is no fault in material or workmanship.
Associated Products (112)Associated Documents - September 12, 2013•Document ID: 10068155Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 2034923/2
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (8)Associated Documents - September 12, 2013•Document ID: 10121370Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- A911307 2030465-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 13-98 dated August 5, 2013. MMI 3G+ Sound system "popping" and various other technical Issues (K0715 Update). This bulletin only applies to vehicles with Navigation Plus (PR Number 8DY). The applicable vehicles can be clearly identified by the SIM card slot on the faceplate of the front MMI mainunit.
Associated Products (13)Associated Documents - September 12, 2013•Document ID: 10121369Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A911306 2034923-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 13-99 dated August 5, 2013. Sound system ?pops? and loses audio for a few seconds (for vehicles with base sound system). Sound system loses audio for a few seconds and returns on its own (for vehicles with Bose or Bang & Olufsen sound system). If the sound does not return on its own, or is accompanied by relevant DTCs in the vehicle, another issue may be present. Verify the root cause before proceeding with this bulletin. HD radio does not output in Stereo. This bulletin only applies to vehicles with Navigation Plus (PR Number 8DY). The applicable vehicles can be clearly identified by the MMI control panel in the center console. Continual improvements to MMI software provides solutions to issues experienced in the field.
Associated Products (8)Associated Documents - September 11, 2013•Document ID: 10226505Service Bulletin/Repair InstructionsLANE DEPARTURE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- 37131720290278
- Date Added:
- November 21, 2022
- Manufacturer:
- AUDI
SummaryTransmission warning message in cluster
Associated Products (17)Associated Documents - September 11, 2013•Document ID: 10210655Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 37 13 17 2029027
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryThe DTCs are stored due to an issue with the transmission control module software. Specific DFCCs are stored as a result of the following situations: ? DTC P060A00 with DFCC 8692 can be logged when a driving mode (Drive or Reverse) is selected within one second of selecting Neutral, while the vehicle rolls at a speed less than 2 mph (such as when the vehicle is being maneuvered in or out of a parking spot). ? DTC P060A00 with DFCC 8694 can be logged when the gear is quickly changed from Park to Neutral, due to a low diagnosis threshold. ? DTC P060A00 with DFCC 12480 can be logged when the gear is changed using the Tiptronic function, due to a low diagnosis threshold.
Associated Products (14)Associated Documents - September 11, 2013•Document ID: 10121367Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A911304 2013422-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 12-49 dated July 31, 2012. The Bluetooth® telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
Associated Products (117)Associated Documents - September 11, 2013•Document ID: 10121362Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING
- Mfr Comm. #:
- A801305 2033806-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 80 number 13-04 dated August 9, 2013. Malfunction Indicator Lamp is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. ?Limp Home? mode is active. Faults are stored in the transmission control module. Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into the wiring harness through the connector and into various control units. Climate system heating performance is insufficient due to coolant loss, or due to a faulty N82 control valve. Inspection of the coolant control valves N82, N509, or N488 reveals the presence of coolant inside the electrical connector as shown in the illustration. The connectors, wiring harness, and/or connected control units may have been damaged from exposure to coolant.
Associated Products (24)Associated Documents - September 11, 2013•Document ID: 10121329Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- A371317 2029027-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 37 number 13-02 dated April 26, 2013. Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction. DTCs is stored in the transmission control module (TCM). If DFCCs do not match exactly, this TSB does not apply.
Associated Products (17)Associated Documents - September 11, 2013•Document ID: 10054865Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- TSB-37-13-17
- Date Added:
- March 6, 2014
- Manufacturer:
- AUDI
SummaryAUDI: THE TRANSMISSION CONTROL MODULE SOFTWARE WOULD ILLUMINATE IN INSTRUMENT CLUSTER AND VEHICLE FAILS TO MOVE AFTER SHIFTING INTO GEAR AND NEW SOFTWARE IS NEEDED TO ADDRESS CONDITION. *PE
Associated Products (15)Associated Documents - September 10, 2013•Document ID: 10121363Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS
- Mfr Comm. #:
- A871345 2024644-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 87 number 13-41 dated May 30, 2013. Moisture in the driver or front passenger foot well. Due to a faulty and/or incorrectly installed condensation drain hose, condensation from the evaporator could enter the front foot well areas through a gap between the body and the sealing surface of the drain hose.
Associated Products (26)Associated Documents - September 10, 2013•Document ID: 10121341Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- A481353 2035178-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummaryOn vehicles equipped with a manual transmission, a steering warning may briefly display in the instrument cluster when the engine is restarted after improper use of the clutch pedal. For example, the warning may appear when the engine is restarted after the clutch pedal has been released too quickly during low-RPM, low-speed parking lot maneuvers. A yellow steering warning symbol with the message ?Steering fault. You can continue driving.? A red steering warning symbol with the message ?Steering defective. Do not drive the vehicle.? Codes may be stored in the diagnostic log under the power steering control module. The vehicle system voltage drops when the starter motor is operating. Because the power steering control module has a parallel circuit with the starter motor (terminal 29), this normal voltage drop may set a symptom code within the scenario described in the Condition section of this bulletin.
Associated Products (3)Associated Documents