Bulletin de service

2024-2025 Audi A3/Q3 Front Anti-Roll Bar Noise TSB

Audi TSB 2076544/3 details a front-end noise issue in 2024-2025 Audi A3, S3, RS 3, and Q3 vehicles. The noise, described as chattering, crunching, or creaking, is caused by the front anti-roll bar resting against the subframe due to dimensional inaccuracies. The repair involves replacing the…

Byeditor sarah mitchell2024 Audi S3
2024 Audi S3 — manufacturer_communication document image 1
Source: NHTSA manufacturer_communication 11015775
2076544/3Audi A3 front noiseAudi Q3 anti-roll bar noiseAudi S3 suspension noiseAudi RS 3 front end noisefront anti-roll bar rests on subframenoise from front end of the vehiclechattering noisecrunching/groaning/cracklingstabilizer bar noise
Audi A3
2024–2025
Audi Q3
2024
Audi RS 3
2024–2025
Audi S3
2025

Audi has released Technical Service Bulletin (TSB) 2076544/3 to address customer complaints regarding various noises emanating from the front end of certain 2024-2025 Audi A3, S3, RS 3, and Q3 models. This bulletin, last revised on February 26, 2025, specifically targets a condition where the front anti-roll bar makes contact with the subframe, leading to audible disturbances.

Symptoms

Owners of affected Audi vehicles may experience a range of front-end noises, particularly during specific driving conditions. These noises are often described as "noise from front end of the vehicle" and can include:

  • "chattering"
  • "noise"
  • "crunching/groaning/crackling"

These sounds are typically noticeable when turning, during suspension compression or extension, and when driving over bumps or speed humps. If you hear an "Audi A3 front noise" under these circumstances, your vehicle might be affected by this issue.

Diagnosis and Trigger Conditions

According to Audi's workshop findings, the root cause of the "Audi A3 front noise" is the front anti-roll bar resting against the subframe of the front axle. This contact is attributed to a dimensional inaccuracy in the subframe, meaning its manufacturing specifications were not met precisely. Technicians are instructed to visually inspect the anti-roll bar and subframe for signs of contact, including "scratch" marks, "scoring/corrosion," or any indication that the component is "damaged."

Repair Procedure Summary

The prescribed repair for this condition is straightforward: if the anti-roll bar is found to be resting on the subframe, it must be replaced. This replacement aims to install an anti-roll bar that correctly clears the subframe, thereby eliminating the source of the noise. The TSB 2076544/3 does not specify any special tools or parts beyond a new anti-roll bar.

Warranty Information

For vehicles still under warranty, this repair should be covered. Audi specifies Service Number 4007 and Damage Code 0010 for this issue, with Labor Operations listed as "Renewing subframe" under code 4007 55XX. When submitting a warranty claim, dealers are required to attach photos or videos clearly showing the complaint, including the VIN and date. These images must be unedited, in focus, and clearly mark the location of the problem. Owners should be aware that if their vehicle is outside of any warranty, this Technical Service Bulletin is for informational purposes only, meaning the repair cost may fall to the owner.

Owner Action

If you are experiencing a persistent "Audi A3 front noise" or similar sounds from the front end of your 2024-2025 Audi A3, S3, RS 3, or Q3, it is recommended to schedule an appointment with an authorized Audi service center. Clearly describe the symptoms and the conditions under which the noise occurs. You may reference Technical Service Bulletin 2076544/3 to assist the technician in diagnosing the problem. Be prepared to demonstrate the noise if possible.

Source: NHTSA ID 11015775

Galerie

1 image

Frequently Asked Questions

What causes the front-end noise in my 2024-2025 Audi A3, S3, RS 3, or Q3?
The front-end noise, often described as chattering, crunching, or creaking, is caused by the front anti-roll bar making contact with the subframe. This contact occurs due to a dimensional inaccuracy in the subframe's manufacturing.
What are the symptoms of the Audi A3 front noise issue?
Symptoms include various noises from the front end of the vehicle, such as chattering, crunching, or creaking. These sounds are typically heard when turning, driving over bumps or speed humps, or when the suspension compresses or extends.
How is the anti-roll bar noise fixed according to TSB 2076544/3?
The repair involves replacing the front anti-roll bar. This addresses the contact issue with the subframe, resolving the "Audi A3 front noise" and associated sounds.
Is the repair for the front anti-roll bar noise covered by warranty?
Yes, if your 2024-2025 Audi A3, S3, RS 3, or Q3 is still under warranty, the repair should be covered. Audi uses Service Number 4007 and Damage Code 0010 for this issue. If your vehicle is out of warranty, the TSB is for informational purposes only, and you may be responsible for the repair costs.

Related Articles

2024-2025 Audi MMI Emergency Call Fault Software Update TSB

Audi Technical Service Bulletin 2081007/1 addresses MMI function problems and 'Emergency call fault' messages in 2024-2025 Audi A3, S3, RS 3, and Q3 models. A software update for the MMI, OCU, and gateway modules resolves these issues.

2022-2025 Audi Pre Sense Warning, Jolt, or Braking TSB

Audi has released Technical Service Bulletin 2069662/3 to address customer complaints of false 'Audi pre sense' warnings, warning jolts, or unexpected brake engagement in 2022-2025 Audi A3, S3, and RS 3 models. This TSB outlines diagnostic steps for technicians.

2023-2024 Audi A3 / S3 / RS 3 P0A8200 Cooling Fan Fault

Audi has issued Technical Service Bulletin (TSB) 2080516/1 for 2023-2024 A3, S3, and RS 3 models equipped with the 48V MHEV system. It addresses the 'Vehicle electrical system fault' message and diagnostic trouble code P0A8200, related to the hybrid battery cooling fan or low battery charge.

2024-2025 Audi A3, S3, RS 3 Air Flow Intensity Issue TSB

Audi has issued Technical Service Bulletin 2074919/3 for 2024-2025 A3, S3, and RS 3 models regarding a concern where the air flow intensity does not change when the blower level is set higher than 4 in manual AC mode. This is a known software issue.

2021-2026 Audi A3/S3/RS3/Q3 Tire Pressure Warning TSB

Audi has released Technical Service Bulletin 2075088/2 to address false tire pressure warnings in the instrument cluster for 2021-2026 A3, S3, RS3, and Q3 models. This issue can be caused by dirt or foreign objects affecting the ABS speed sensors.

Comments

Be the first to comment.

Leave a comment

Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.

Verifying you are human...