Lexus IS Service Bulletins (2000)
28 manufacturer communications on file.
- April 19, 2024•Document ID: 11003648Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0024-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryThe condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. •The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
Associated Products (245)Associated Documents - April 19, 2024•Document ID: 11003643Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0022-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryAcid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Associated Products (238)Associated Documents - April 19, 2024•Document ID: 11003642Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0021-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryLexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. •The entire bulletin has been updated.
Associated Products (234)Associated Documents - April 19, 2024•Document ID: 11003641Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0020-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryVehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
Associated Products (234)Associated Documents - April 19, 2024•Document ID: 11003593Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0024-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryThe condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. •The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
Associated Products (245)Associated Documents - April 19, 2024•Document ID: 11003588Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0022-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryAcid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Associated Products (238)Associated Documents - April 19, 2024•Document ID: 11003587Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0021-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryLexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. •The entire bulletin has been updated.
Associated Products (234)Associated Documents - April 19, 2024•Document ID: 11003586Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0020-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryVehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
Associated Products (234)Associated Documents - April 13, 2022•Document ID: 10214355Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- Safety Recall 22
- Date Added:
- June 21, 2022
- Manufacturer:
- LEXUS
SummaryLexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
Associated Products (245)Associated Documents - January 12, 2022•Document ID: 10207945Service Bulletin/Repair InstructionsWHEELS; TIRES; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Lexus PRO19-02 -
- Date Added:
- February 14, 2022
- Manufacturer:
- LEXUS
SummaryPOL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Lexus. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Lexus.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
Associated Products (245)Associated Documents - August 5, 2020•Document ID: 10179697Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT
- Mfr Comm. #:
- L-SB-0002-20 Rev
- Date Added:
- September 14, 2020
- Manufacturer:
- LEXUS
SummaryTSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.
Associated Products (188)Associated Documents - August 5, 2020•Document ID: 10179601Service Bulletin/Repair InstructionsPOWER TRAIN:MANUAL TRANSMISSION:LUBRICANT; ENGINE
- Mfr Comm. #:
- L-SB-0002-20 Rev
- Date Added:
- September 14, 2020
- Manufacturer:
- LEXUS
SummaryTSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.
Associated Products (188)Associated Documents - May 1, 2020•Document ID: 10176283Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- Lexus Safety Re
- Date Added:
- June 15, 2020
- Manufacturer:
- LEXUS
SummarySafety Recall and Service Campaign - Technician Certification Requirements
Associated Products (221)Associated Documents - April 6, 2020•Document ID: 10174889Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- L-SB-0179-17 Obs
- Date Added:
- May 11, 2020
- Manufacturer:
- LEXUS
SummaryTSB: OBSOLETE NOTICE April 06, 2020: This bulletin is now obsolete. Please see L-SB-0008-20. Replacement Certification Labels and VIN Plates
Associated Products (192)Associated Documents - April 6, 2020•Document ID: 10174888Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- L-SB-0008-20
- Date Added:
- May 11, 2020
- Manufacturer:
- LEXUS
SummaryTSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.
Associated Products (211)Associated Documents - February 4, 2020•Document ID: 10172820Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- L-SB-0002-20
- Date Added:
- March 30, 2020
- Manufacturer:
- LEXUS
SummaryTSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address the condition.
Associated Products (13)Associated Documents - December 5, 2017•Document ID: 10131653Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- L-SB-0048-08 Obs
- Date Added:
- April 2, 2018
- Manufacturer:
- LEXUS
SummaryTSB: Replacement Certification Labels. OBSOLETE NOTICE November 28, 2017: This bulletin is now obsolete. Please see L-SB-0179-17.
Associated Products (30)Associated Documents - November 28, 2017•Document ID: 10133657Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:LABELS
- Mfr Comm. #:
- L-SB-0179-17
- Date Added:
- April 23, 2018
- Manufacturer:
- LEXUS
SummaryTSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90. Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Vehicle replacement certification labels (vinyl label installed on driver door or door post) and VIN lates (metal plate riveted to dashboard) may be available from Lexus, provided the request meets one of the criteria listed in this Service Bulletin.
Associated Products (179)Associated Documents - November 21, 2017•Document ID: 10133651Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- L-SB-0113-12_Rev
- Date Added:
- April 23, 2018
- Manufacturer:
- LEXUS
SummaryTSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Lexus vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.
Associated Products (148)Associated Documents - October 16, 2014•Document ID: 10205346Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- LSB008214
- Date Added:
- December 20, 2021
- Manufacturer:
- LEXUS
SummaryAuto matic Transmission Replacement kPrecautions
Associated Products (155)Associated Documents