Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Ford Motor Company (Ford) is recalling certain 2023 Edge vehicles. The front right headlight may be too bright or aimed incorrectly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Ford Motor Company (Ford) is recalling certain 2023 Edge and Lincoln Nautilus vehicles. The child seat tether wire welds on the second-row left-side seat back frame may be insufficient, which can reduce the seat's ability to properly restrain a child during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 225, "Child Restraint Anchorage Systems."
The ClickTight mechanism is what allows the car seat to be moved in/out of the vehicle after securing using the seatbelt of the vehicle. Essentially, this mechanism causes the bottom of the car seat to fold up and allows the parent to unlatch the seatbelt to move the car seat. This mechanism is spring loaded and is supposed to lock/unlock by simply squeezing together two red handles. On my car seat, this mechanism has become stuck and does not allow the mechanism to lock into place & secure the car seat onto the seat belt. I am unsure of what is causing this jam, but I have only purchased this car seat on May 15, 2026 in brand new condition from Amazon. I have not been involved in an accident, nor has the car seat been moved in/out of the car excessively (perhaps 6-7 times at most until the first incident on 8/25/2026).
No injuries · No fire · No crash
The contact owns a 2023 Ford Edge. The contact stated that on multiple occasions, the center console display overheated, causing the cabin temperature to become extremely hot. The air conditioning could not be operated due to the center console display being inoperable. No warning lights illuminated. The vehicle was taken to a local dealer, where it was diagnosed that the center console display was faulty and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 28,000.
No injuries · No fire · No crash
CAR HESITATES WHEN GIVING GAS PEDAL, ON GOING ISSSUE, DOESN'T HAPPEN ALL THE TIME SPERATIC
No injuries · No fire · No crash
On June 20th 2026 while driving my 2023 Ford Edge SEL AWD at approximately 35mph on an active hwy (93 AZ NB in Wickenburg AZ) the vehicle experienced a sudden catastrophic loss of motive power and came to a sudden stop in a jerking motion. The vehicle completely disabled itself without warning in live traffic, presenting an immediate and severe safety hazard to myself and surrounding motorists. I was forced to stay in an immobile position impeding the flow of traffic and could not coast safely out of the way of hazardous traffic conditions and subsequently was almost hit by a semi-truck and another POV. The vehicle was subsequently towed out of the hwy with law enforcement present for safety and the local repair shop provided a quick analysis of transmission failure. About 2 weeks later, the vehicle was towed by AAA to another mechanic and subsequently an authorized Ford Dealership where through diagnostic evaluation and repair. The official scan log revealed a critical internal failure of the Powertrain Control Module (PCM) identified by Diagnostic Trouble Code P0600 (serial communication link failure). This total electronic communication breakdown immediately triggered an un-commanded cascade of secondary transmission performance faults, specifically P0751 (shift solenoid A Stuck off) and P2700, P2701, P2704, P27B2, P27B4 (transmission friction element application time/performance faults). The failure terminated in codes P073D (unable to engage neutral), P07E4 (unable to engage gear 7), and P07E6 (unable to engage gear 8) which locked the powertrain. Crucially, this sudden module collapse and cascading powertrain destruction occurred exactly 81 days following a mandated Factory Recall regarding the PCM was performed by an authorized FORD dealership on my vehicle. The engineering evidence suggests that a corrupted software flash or module disruption during the recall process caused the master PCM to issue erratic hydraulic line pressure commands, starving the trans
No injuries · No fire · No crash
The contact owns a 2023 Ford Edge. The contact stated that while driving at an undisclosed speed and accelerating, the vehicle unexpectedly stopped. The contact stated that shortly afterwards, the vehicle returned to normal operation. There was no warning light illuminated. The dealer was contacted, and the vehicle was diagnosed with transmission failure. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 78,000.
No injuries · No fire · No crash