Dodge Charger Service Bulletins
713 manufacturer communications on file.
- July 10, 2025•Document ID: 11020739Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-126-25 REV. A
- Date Added:
- July 17, 2025
- Manufacturer:
- DODGE
SummaryFlash: Integrated Dual Charging Module (IDCM) Updates 11A2 Customers may comment on one or more of the following: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charge. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020734Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-071-25 REV. C
- Date Added:
- July 17, 2025
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check -Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more the following Diagnostic Trouble Codes (DTCs): ● P0DE6 - Hybrid/EV Battery Pack Cell Voltage Low. NOTE: Active or stored. ● P1DAF - Incompatible Limp In Action Requested. NOTE: Active or stored. ● P1CDE – Hybrid/EV Wakeup Control 2 Output Circuit Short to Ground. ● P1CDA – Hybrid/EV Wakeup Control 1 Output Circuit/Open. ● U00C6 – Lost Communication With AIR Pressure Sensor. ● P0F00 - Hybrid/EV Battery Module 1 Performance. ● P0F01 - Hybrid/EV Battery Module 2 Performance. ● P0F02 - Hybrid/EV Battery Module 3 Performance. ● P0F03 - Hybrid/EV Battery Module 4 Performance. ● P0F04 - Hybrid/EV Battery Module 5 Performance. ● P0F05 - Hybrid/EV Battery Module 6 Performance. ● P0F06 - Hybrid/EV Battery Module 7 Performance. ● P0F07 - Hybrid/EV Battery Module 8 Performance. ● P0F08 - Hybrid/EV Battery Module 9 Performance. ● P0F09 - Hybrid/EV Battery Module 10 Performance. ● P0F0A - Hybrid/EV Battery Module 11 Performance. ● P0F0B - Hybrid/EV Battery Module 12 Performance. ● P0F0C - Hybrid/EV Battery Module 13 Performance. ● P0CA6-00 - Hybrid/EV Battery Charging Current High. NOTE: If the following DTCs are present/active in the BPCM, Battery Pack replacement will be required. Guided Diagnostics will prompt you for the repair action if the diagnostic is present on the vehicle. ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Control Circuit Low. ● P0AE2-00 - Hybrid/EV Battery Precharge Contactor Circuit Stuck Closed. ● P0AA1-00 - Hybrid/EV Battery Positive Contactor "A" Stuck Closed. ● P0FF8-00 - Hybrid/EV Battery Precharge Contactor Circuit "B" Stuck Closed. Customers may also comment on one or more of the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Vehicle will not enter Drive Ready Mode. This bulletin also includes the following software enhancements: ● Bootloader update to prevent battery disconnect unit damage. ● Improvements in detecting pre-existing battery disconnect unit damage. ● Charging related enhancements that may lead to DTC P0CA6 falsely setting This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020733Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-070-25 REV. B
- Date Added:
- July 17, 2025
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Motor Control Processor A (MCP A) Updates 11A2 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020732Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-027-25 REV. C
- Date Added:
- July 17, 2025
- Manufacturer:
- DODGE
SummaryFlash: Motor Control Processor A (MCP A) Updates 6A2 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020731Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-025-25 REV. C
- Date Added:
- July 17, 2025
- Manufacturer:
- DODGE
SummaryFlash: Battery Pack Control Module (BPCM) Updates 6A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0DE6 - Hybrid/EV Battery Pack Cell Voltage Low. NOTE: Active or stored. ● P1DAF - Incompatible Limp In Action Requested. NOTE: Active or stored. ● P1CDE – Hybrid/EV Wakeup Control 2 Output Circuit Short to Ground. ● P1CDA – Hybrid/EV Wakeup Control 1 Output Circuit/Open. ● U00C6 – Lost Communication With AIR Pressure Sensor. ● P0F00 - Hybrid/EV Battery Module 1 Performance. ● P0F01 - Hybrid/EV Battery Module 2 Performance. ● P0F02 - Hybrid/EV Battery Module 3 Performance. ● P0F03 - Hybrid/EV Battery Module 4 Performance. ● P0F04 - Hybrid/EV Battery Module 5 Performance. ● P0F05 - Hybrid/EV Battery Module 6 Performance. ● P0F06 - Hybrid/EV Battery Module 7 Performance. ● P0F07 - Hybrid/EV Battery Module 8 Performance. ● P0F08 - Hybrid/EV Battery Module 9 Performance. ● P0F09 - Hybrid/EV Battery Module 10 Performance. ● P0F0A - Hybrid/EV Battery Module 11 Performance. ● P0F0B - Hybrid/EV Battery Module 12 Performance. ● P0F0C - Hybrid/EV Battery Module 13 Performance. ● P0CA6-00 - Hybrid/EV Battery Charging Current High. NOTE: If the following DTCs are present/active in the BPCM, Battery Pack replacement will be required. Guided Diagnostics will prompt you for the repair action if the diagnostic is present on the vehicle. ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Control Circuit Low. ● P0AE2-00 - Hybrid/EV Battery Precharge Contactor Circuit Stuck Closed. ● P0AA1-00 - Hybrid/EV Battery Positive Contactor "A" Stuck Closed. ● P0FF8-00 - Hybrid/EV Battery Precharge Contactor Circuit "B" Stuck Closed. Customers may also comment on one or more of the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Vehicle will not enter Drive Ready Mode. This bulletin also includes the following software enhancements: ● Bootloader update to prevent battery disconnect unit damage. ● Improvements in detecting pre-existing battery disconnect unit damage. ● Charging related enhancements that may lead to DTC P0CA6 falsely setting. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020730Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-024-25 REV. C
- Date Added:
- July 17, 2025
- Manufacturer:
- DODGE
SummaryFlash: Motor Control Processor B (MCP B) Updates 6A2 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020729Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-023-25 REV. C
- Date Added:
- July 17, 2025
- Manufacturer:
- DODGE
SummaryFlash: Motor Control Processor A (MCP A) Updates 11A2 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020728Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-022-25 REV. C
- Date Added:
- July 17, 2025
- Manufacturer:
- DODGE
SummaryFlash: Battery Pack Control Module (BPCM) Updates 11A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more the following Diagnostic Trouble Codes (DTCs): ● P0DE6 - Hybrid/EV Battery Pack Cell Voltage Low. NOTE: Active or stored. ● P1DAF - Incompatible Limp In Action Requested. NOTE: Active or stored. ● P1CDE – Hybrid/EV Wakeup Control 2 Output Circuit Short to Ground. ● P1CDA – Hybrid/EV Wakeup Control 1 Output Circuit/Open. ● U00C6 – Lost Communication With AIR Pressure Sensor. ● P0F00 - Hybrid/EV Battery Module 1 Performance. ● P0F01 - Hybrid/EV Battery Module 2 Performance. ● P0F02 - Hybrid/EV Battery Module 3 Performance. ● P0F03 - Hybrid/EV Battery Module 4 Performance. ● P0F04 - Hybrid/EV Battery Module 5 Performance. ● P0F05 - Hybrid/EV Battery Module 6 Performance. ● P0F06 - Hybrid/EV Battery Module 7 Performance. ● P0F07 - Hybrid/EV Battery Module 8 Performance. ● P0F08 - Hybrid/EV Battery Module 9 Performance. ● P0F09 - Hybrid/EV Battery Module 10 Performance. ● P0F0A - Hybrid/EV Battery Module 11 Performance. ● P0F0B - Hybrid/EV Battery Module 12 Performance. ● P0F0C - Hybrid/EV Battery Module 13 Performance. ● P0CA6-00 - Hybrid/EV Battery Charging Current High. NOTE: If the following DTCs are present/active in the BPCM, Battery Pack replacement will be required. Guided Diagnostics will prompt you for the repair action if the diagnostic is present on the vehicle. ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Control Circuit Low. ● P0AE2-00 - Hybrid/EV Battery Precharge Contactor Circuit Stuck Closed P0AA1-00 - Hybrid/EV Battery Positive Contactor "A" Stuck Closed. ● P0FF8-00 - Hybrid/EV Battery Precharge Contactor Circuit "B" Stuck Closed. Customers may also comment on one or more of the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Vehicle will not enter Drive Ready Mode. This bulletin also includes the following software enhancements: ● Bootloader update to prevent battery disconnect unit damage. ● Improvements in detecting pre-existing battery disconnect unit damage. ● Charging related enhancements that may lead to DTC P0CA6 falsely setting. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020727Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-021-25 REV. C
- Date Added:
- July 17, 2025
- Manufacturer:
- DODGE
SummaryFlash: Motor Control Processor B (MCP B) Updates 11A2 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - July 9, 2025•Document ID: 11020771Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- S2508000048
- Date Added:
- July 17, 2025
- Manufacturer:
- DODGE
SummaryCharging Status Lights Inoperable (No Illumination) at Charge Port, Vehicle Still Does Charge
Associated Products (4)Associated Documents - July 4, 2025•Document ID: 11020636Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 21-009-25 REV. C
- Date Added:
- July 9, 2025
- Manufacturer:
- DODGE
Summary850RE D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must have at least 11,265 km (7,000 mi.) and exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. Customers may also comment on one or more of the following: ● Transmission slips when shifting. ● Vehicle will not move in reverse. ● Vehicle will not shift higher than third gear This bulletin involves replacing the D clutch.
Associated Products (39)2025 Dodge Durango2025 Jeep Gladiator2025 Jeep Wrangler2025 Ram 15002024 Dodge Durango2024 Jeep Gladiator2024 Jeep Grand Cherokee2024 Jeep Grand Cherokee L2024 Jeep Wrangler2024 Ram 15002023 Chrysler 3002023 Dodge Challenger2023 Dodge Charger2023 Dodge Durango2023 Jeep Gladiator2023 Jeep Grand Cherokee2023 Jeep Grand Cherokee L2023 Jeep Wrangler2023 Ram 15002022 Chrysler 300+ 19 moreAssociated Documents - July 4, 2025•Document ID: 11020601Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- S2508000056
- Date Added:
- July 9, 2025
- Manufacturer:
- JEEP
Summary12v Ignition Off Draw (IOD) Caused By Power Electronics Coolant Pump 1 (PECP-1) Continuously Running When Vehicle Is Asleep
Associated Products (4)Associated Documents - July 4, 2025•Document ID: 11020600Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- S2208000138 REV.B
- Date Added:
- July 9, 2025
- Manufacturer:
- JEEP
SummaryDecreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
Associated Products (65)2025 Chrysler Pacifica2025 Chrysler Voyager2025 Dodge Durango2025 Jeep Compass2025 Jeep Gladiator2025 Jeep Grand Cherokee2025 Jeep Grand Cherokee L2025 Jeep Grand Wagoneer2025 Jeep Wagoneer2025 Jeep Wrangler2025 Ram 15002024 Chrysler Pacifica2024 Chrysler Voyager2024 Dodge Durango2024 Jeep Compass2024 Jeep Gladiator2024 Jeep Grand Cherokee2024 Jeep Grand Cherokee L2024 Jeep Grand Wagoneer2024 Jeep Wagoneer+ 45 moreAssociated Documents - July 4, 2025•Document ID: 11020595Service Bulletin/Repair InstructionsSTEERING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- S2523000064
- Date Added:
- July 9, 2025
- Manufacturer:
- DODGE
SummaryDiagnostic Trouble Code (DTC) C2217-00 Electric Power Steering Module Internal Set In Electric Power Steering Module (EPS).
Associated Products (2)Associated Documents - July 2, 2025•Document ID: 11020618Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-205-25
- Date Added:
- July 9, 2025
- Manufacturer:
- DODGE
SummaryFlash: Electronic Vehicle Control Unit (EVCU) Updates 6A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. Customers may also comment on the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). This bulletin involves reprogramming the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - July 2, 2025•Document ID: 11020617Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-204-25
- Date Added:
- July 9, 2025
- Manufacturer:
- DODGE
SummaryFlash: Electronic Vehicle Control Unit (EVCU) Updates 11A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. Customers may also comment on the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). This bulletin involves reprogramming the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - July 2, 2025•Document ID: 11020614Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-075-25 REV. B
- Date Added:
- July 9, 2025
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Electronic Vehicle Control Unit (EVCU) Updates 11A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right.** ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● Instrument Panel Cluster (IPC), radio range and charge time estimations and messages are not correct. ● Battery range incorrect. ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. ● Battery heating values incorrect on radio when on Performance Pages display. ● Charging does not start when plugged in. ● Charging is not indicating when battery is at full charge. ● Charging slow or takes too long. ● Bumps and jerks while accelerating or decelerating. ● Wrench icon is illuminated on the IPC. ● Turtle icon is illuminated on the IPC. ● Vehicle enters into limp home mode. In addition, the following software enhancement is also available: ● Enables compatibility with the Flo V3 Chargers. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 2, 2025•Document ID: 11020612Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-028-25 REV. C
- Date Added:
- July 9, 2025
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check
Associated Products (1)Associated Documents - July 2, 2025•Document ID: 11020611Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-026-25 REV. C
- Date Added:
- July 9, 2025
- Manufacturer:
- DODGE
SummaryFlash: Electronic Vehicle Control Unit (EVCU) Updates 11A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right.** ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● Instrument Panel Cluster (IPC), radio range and charge time estimations and messages are not correct. ● Battery range incorrect. ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. ● Battery heating values incorrect on radio when on Performance Pages display. ● Charging does not start when plugged in. ● Charging is not indicating when battery is at full charge. ● Charging slow or takes too long. ● Bumps and jerks while accelerating or decelerating. ● Wrench icon is illuminated on the IPC. ● Turtle icon is illuminated on the IPC. ● Vehicle enters into limp home mode. In addition, the following software enhancement is also available: ● Enables compatibility with the Flo V3 Chargers. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - June 28, 2025•Document ID: 11020107Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-203-25
- Date Added:
- July 2, 2025
- Manufacturer:
- JEEP
SummaryCharging The 12 Volt Battery When Voltage is Below 6 Volts Customers or technicians may experience one or more of the following: ● Low 12 volt battery voltage. ● Unable to start the vehicle. ● High Voltage contactors not closing. ● Battery tell-tale light on. ● Charging system inoperable. ● Depleted 12 volt battery.
Associated Products (7)Associated Documents