CAN-AM Spyder Service Bulletins (2011)
31 manufacturer communications on file.
- January 17, 2013•Document ID: 10052086Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
- Mfr Comm. #:
- RC-2010-0015
- Date Added:
- May 15, 2013
- Manufacturer:
- CAN-AM
SummaryBRP: ON THE CAN-AM ROADSTER, THE FUEL CAP FAILS TO SEAL PROPERLY, ON FUEL TANK FILLER NECK, CAUSING FUEL VAPORS AND IN PRESENCE OF AN IGNITION SOURCE, MIGHT RESULT IN A FIRE AND NEEDS REPLACING. MODELS 2008-2012 CAN-AM SPYDER GS, RS, AND RT. *PE
Associated Products (5)Associated Documents - December 21, 2012•Document ID: 10129601Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- Article 2012-13
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryArticle informing dealers of Safety Campaign 2012-13 - Fuel Cap replacement. The fuel cap may not seal properly the fuel tank filler neck. Fuel vapors in the presence of an ignition source could result in a fire.
Associated Products (5)Associated Documents - December 13, 2012•Document ID: 10129602Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Posting 12-13
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryPosting informing the community that some of them may have seen an alert from Transport Canada regarding a recall on certain Spyder models. (recall 2012-13)
Associated Products (5)Associated Documents - October 23, 2012•Document ID: 10126524Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- Article 10-23
- Date Added:
- December 22, 2017
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) in reference to quality warranty bulletin 2012-12. If the analog fuel gauge with stepper motor is installed with an old version of the cluster software or on a 2010 RT with a cluster which cannot be updated, the following situations may be observed: * Fuel level is displayed in the cluster digital display. * Wrong fuel level. * Even if the fuel tank is full, the digital display may show 3 bars and the analog fuel gauge shows half. * The "low fuel" indicator turns on when the fuel tank reaches half. * The temperature gauge needle indicates maximum (overheat) even if the engine is cold.
Associated Products (2)Associated Documents - October 23, 2012•Document ID: 10125476Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM
- Mfr Comm. #:
- Article 10-23
- Date Added:
- December 14, 2017
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) in reference to quality warranty bulletin 2012-12. If the analog fuel gauge with stepper motor is installed with an old version of the cluster software or on a 2010 RT with a cluster which cannot be updated, the following situations may be observed: ? Fuel level is displayed in the cluster digital display. ? Wrong fuel level. ? Even if the fuel tank is full, the digital display may show 3 bars and the analog fuel gauge shows half. ? The "low fuel" indicator turns on when the fuel tank reaches half. ? The temperature gauge needle indicates maximum (overheat) even if the engine is cold.
Associated Products (2)Associated Documents - October 22, 2012•Document ID: 10126525Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- Bulletin 2012-12
- Date Added:
- December 22, 2017
- Manufacturer:
- CAN-AM
SummaryWarranty bulletin addressing the problem that analog fuel gauge needle does not have any dampening causing a variable fuel level reading. Replacing the analog fuel gauge with a new improved one (with stepper motor) is required. After fuel gauge installation, update the cluster software.
Associated Products (2)Associated Documents - October 22, 2012•Document ID: 10125477Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM
- Mfr Comm. #:
- Bulletin 2012-12
- Date Added:
- December 14, 2017
- Manufacturer:
- CAN-AM
SummaryWarranty bulletin addressing the problem that analog fuel gauge needle does not have any dampening causing a variable fuel level reading. Replacing the analog fuel gauge with a new improved one (with stepper motor) is required. After fuel gauge installation, update the cluster software.
Associated Products (2)Associated Documents - June 19, 2012•Document ID: 10185875Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE
- Mfr Comm. #:
- B2012-10
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummaryTo be performed at PDI on registered (sold) vehicles.
Associated Products (2)Associated Documents - June 19, 2012•Document ID: 10185873Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- B2012-8
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummaryTo be performed at PDI on unregistered (unsold) vehicles.
Associated Products (2)Associated Documents - April 10, 2012•Document ID: 10051563Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SB-SE-5
- Date Added:
- March 18, 2013
- Manufacturer:
- CAN-AM
SummaryBRP: THE SHIFT UP AND DOWN PADDLE FAILS TO WORK AND ADJUSTMENT IS NEEDED THAT MIGHT IMPROVE THE SITUATION ON CERTAIN MODEL MOTORCYCLES. MODEL SPYDER GS/RS. NO MODEL YEARS LISTED. *PE
Associated Products (5)Associated Documents - February 27, 2012•Document ID: 10185854Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER:KINETIC:CLUTCH
- Mfr Comm. #:
- PRE-02-27-2012
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummaryCentrifungal clutch vibration.
Associated Products (14)Associated Documents