CAN-AM Spyder Service Bulletins
234 manufacturer communications on file.
- July 3, 2013•Document ID: 10125478Service Bulletin/Repair InstructionsSUSPENSION:FRONT:SHOCK ABSORBER
- Mfr Comm. #:
- 2013-5
- Date Added:
- December 14, 2017
- Manufacturer:
- CAN-AM
SummaryWarranty bulletin addressing a possible front shocks dampening issue. Some vehicles may have been produced with shock absorbers without enough dampening. The proposed solution is to replace both front shocks if problem is encountered.
Associated Products (1)Associated Documents - June 28, 2013•Document ID: 10054443Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TBG-2013-006
- Date Added:
- January 27, 2014
- Manufacturer:
- CAN-AM
SummaryCAN-AM (BRP): INFORMATION CONCERNING THE VEHICLE CONTROL MODULE. THE CALIBRATION MAY BE CORRUPTED. THIS CAN CAUSE THE VEHICLE TO STOP WORKING, E WILL BE DISPLAYED IN THE GAUGE INSTEAD OF THE GEAR POSITION, AND NO COMMUNICATION WILL BE POSSIBLE WITH THE VEHICLE CONTROL MODULE USING THE DIAGNOSTIC TOOL. MODEL: COMMANDER ELECTRIC MODEL YEAR 2013. *JS
Associated Products (2)Associated Documents - June 27, 2013•Document ID: 10120761Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- Posting PO2017
- Date Added:
- October 25, 2017
- Manufacturer:
- CAN-AM
SummaryPosting discussing a possible solution for the Engine coolant over temperature condition, that will be added to the TST.
Associated Products (1)Associated Documents - June 27, 2013•Document ID: 10120760Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- Posting PO2017(2
- Date Added:
- October 25, 2017
- Manufacturer:
- CAN-AM
SummaryPosting discussing the Technical Service Tip (TST) about a diagnostic trouble code - Engine coolant over temperature condition.
Associated Products (1)Associated Documents - June 26, 2013•Document ID: 10120759Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- Article DTC P021
- Date Added:
- October 25, 2017
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) addressing a diagnostic trouble code - Engine coolant over temperature condition.
Associated Products (1)Associated Documents - May 29, 2013•Document ID: 10186272Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- D2013-4
- Date Added:
- February 1, 2021
- Manufacturer:
- CAN-AM
SummaryRT-622 Trailers may experience electrical issues due to trailer light module failure.
Associated Products (3)Associated Documents - May 21, 2013•Document ID: 10119474Service Bulletin/Repair InstructionsENGINE; POWER TRAIN:DRIVELINE
- Mfr Comm. #:
- Posting 05-21
- Date Added:
- October 15, 2017
- Manufacturer:
- CAN-AM
SummaryPosting about some units stalling at idle when coming to a stop with the drive train disengaged. The occurrence will be reduced with time and eliminated after the performance of the 1st maintenance or as the engine brake-in is completed.
Associated Products (1)Associated Documents - May 6, 2013•Document ID: 10120762Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- Article 06-05
- Date Added:
- October 25, 2017
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) addressing that in order to properly investigate a Soft suspension complaint, provide the information listed to the BRP technical support team.
Associated Products (1)Associated Documents - April 19, 2013•Document ID: 10119473Service Bulletin/Repair InstructionsEQUIPMENT; STRUCTURE; STEERING: STEERING WHEEL/HANDLE BAR
- Mfr Comm. #:
- Bulletin 2013-3
- Date Added:
- October 15, 2017
- Manufacturer:
- CAN-AM
SummaryWarranty Bulletin for Parts and Accessories addressing a problem with the coating thickness that may cause damage to the finish of the part's surface (such as scratches). Dealers are to return all inventory with serial number between 200 and 388 and if parts are installed on vehicle, dealers are to contact a BRP service representative.
Associated Products (1)Associated Documents - April 1, 2013•Document ID: 10119470Service Bulletin/Repair InstructionsSTEERING; STEERING: STEERING WHEEL/HANDLE BAR
- Mfr Comm. #:
- Bulletin 2010-7(
- Date Added:
- October 15, 2017
- Manufacturer:
- CAN-AM
SummaryRevision #1 of Warranty bulletin 2010-7 dated September 7, 2010. This safety recall addressed the problem that a situation may occur where you may need to exert a force greater than expected to initiate the turning of the steering handlebar of your vehicle in order to correct its trajectory. At this increased level of force the handlebar may be turned more than you had intended. If this occurs you may steer your vehicle out of lane which increases the possibility of a crash with other traffic or of a drive off the road. As of April 2, 2013, the return procedure has been updated.
Associated Products (1)Associated Documents - March 4, 2013•Document ID: 10119471Service Bulletin/Repair InstructionsSUSPENSION; EQUIPMENT; WHEELS
- Mfr Comm. #:
- Bulletin 2013-2
- Date Added:
- October 15, 2017
- Manufacturer:
- CAN-AM
SummaryWarranty bulletin addressing the problem that some units left the factory with the wheel alignment out of the specification. The solution is to verify the wheel alignment and, if necessary, adjust it according to the improved procedure.
Associated Products (1)Associated Documents - February 26, 2013•Document ID: 10107262Service Bulletin/Repair InstructionsSUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT
- Mfr Comm. #:
- BULLETIN 2013-1
- Date Added:
- June 21, 2017
- Manufacturer:
- CAN-AM
SummaryWARRANTY BULLETIN ADDRESSING THE PROBLEM THAT SOME VEHICLES HAVE BEEN PRODUCED USING FRONT SUSPENSION LOWER ARM BALL JOINTS WITH TOO HIGH FRICTION THAT MAY AFFECT THE DYNAMIC DRIVING PERFORMANCE AND THE CUSTOMER SATISFACTION. THE PROPOSED SOLUTION IS TO REPLACE SUSPENSION LOWER ARM BALL JOINTS (BOTH SIDES).
Associated Products (1)Associated Documents - February 26, 2013•Document ID: 10107261Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- ARTICLE 02-26
- Date Added:
- June 21, 2017
- Manufacturer:
- CAN-AM
SummaryTECHNICAL SERVICE TIP (TST) ADDRESSING THE PROBLEM THAT SOME 2013 UNITS MAY HAVE BEEN DELIVERED WITH AN "OUT OF SPECIFICATION" ALIGNMENT. IF A CUSTOMER COMPLAINS ABOUT THIS ISSUE OR IF DEALER EXPERIENCE AN HANDLING ISSUE WHILE PERFORMING THE PDI ROAD TEST, A FRONT WHEEL ALIGNMENT AND VERIFICATION NEED TO BE PERFORMED.
Associated Products (1)Associated Documents - February 19, 2013•Document ID: 10107402Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- POSTING 02-19 (2
- Date Added:
- June 21, 2017
- Manufacturer:
- CAN-AM
SummaryPOSTING ADDRESSING THE PROBLEM THAT SOME 2013 UNITS MAY HAVE BEEN DELIVERED WITH AN "OUT OF SPECIFICATION" ALIGNMENT. IF THE DEALER FINDS THAT THE UNIT IS AFFECTED, THEY NEED TO FOLLOW THE LINK TO TST AND FOLLOW THE DETAILED INSTRUCTIONS
Associated Products (1)Associated Documents - February 19, 2013•Document ID: 10107216Service Bulletin/Repair InstructionsWHEELS; STEERING
- Mfr Comm. #:
- POSTING 02-19
- Date Added:
- June 20, 2017
- Manufacturer:
- CAN-AM
SummaryDISCUSSION CONCERNING THE ALIGNMENT PROBLEMS WITH CERTAIN MODELS.
Associated Products (1)Associated Documents - February 14, 2013•Document ID: 10107403Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- POSTING 02-14
- Date Added:
- June 21, 2017
- Manufacturer:
- CAN-AM
SummaryPOSTING AND UPDATES REGARDING THE ISSUE OF HANDLING BEHAVIORS ON SOME 2013 MODELS.
Associated Products (1)Associated Documents - February 2, 2013•Document ID: 10107421Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- POSTING 02-27
- Date Added:
- June 21, 2017
- Manufacturer:
- CAN-AM
SummaryPOSTING AND UPDATES REGARDING THE ISSUE OF HANDLING BEHAVIORS ON SOME 2013 MODELS. SPECIFIC INSTRUCTIONS IS GIVEN BY BRP TO DEALERS.
Associated Products (1)Associated Documents - February 2, 2013•Document ID: 10107404Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- POSTING 02-27
- Date Added:
- June 21, 2017
- Manufacturer:
- CAN-AM
SummaryPOSTING AND UPDATES REGARDING THE ISSUE OF HANDLING BEHAVIORS ON SOME 2013 MODELS. SPECIFIC INSTRUCTIONS IS GIVEN BY BRP TO DEALERS.
Associated Products (1)Associated Documents - February 2, 2013•Document ID: 10119469Service Bulletin/Repair InstructionsEQUIPMENT; STEERING: STEERING WHEEL/HANDLE BAR
- Mfr Comm. #:
- Posting 02-27
- Date Added:
- October 15, 2017
- Manufacturer:
- CAN-AM
SummaryPosting and updates regarding the issue of handling behaviors on some 2013 models. Specific instructions is given by BRP to dealers.
Associated Products (1)Associated Documents - January 17, 2013•Document ID: 10107194Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER
- Mfr Comm. #:
- ARTICLE 01-17
- Date Added:
- June 20, 2017
- Manufacturer:
- CAN-AM
SummaryTECHNICAL SERVICE TIP (TST) ADDRESSING THE DETAILS OF THE RECALL FUEL CAP REPLACEMENT, WHERE THE FUEL CAP MAY NOT SEAL PROPERLY ONTO THE FUEL TANK FILTER NECK. FUEL VAPORS IN THE PRESENCE OF AN IGNITION SOURCE COULD RESULT IN A FIRE. BRP IS SENDING OUT REPLACEMENT FUEL CAPS TO ALL CANADIAN AND USA REGISTERED OWNERS.
Associated Products (5)Associated Documents