Audi S6 Service Bulletins
2,944 manufacturer communications on file.
- May 2, 2014•Document ID: 10066330Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 2029714/3
- Date Added:
- May 19, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (20)Associated Documents - May 2, 2014•Document ID: 10122472Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A641433 2029714-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 64 number 12-22 dated July 5, 2012. After one or both of the front door control units (J386/J387) is replaced, one or both of the rear door control units (J3888/J389) cannot be coded or parameterized via an SVM specified vs. actual comparison (spec/actual). The parameter data in the software coding container has changed for the front and rear door control units. As a result, an SVM code is required to update the parameter data for any replacement control unit. Simply running an SVM spec/actual will not code nor update the parameter data in the new replacement control unit. A hardware change suggestion will be provided when an SVM spec/actual is executed. An additional hardware replacement is not required.
Associated Products (50)Associated Documents - May 1, 2014•Document ID: 10216575Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- TT TTS 2015 Flui
- Date Added:
- August 1, 2022
- Manufacturer:
- AUDI
SummaryFluid Capacity Chart.
Associated Products (24)Associated Documents - April 28, 2014•Document ID: 10122392Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- PDI - 2015 A6-S6
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi technician report checklist. All items must be completed prior to customer delivery by an Audi technician. Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests. Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection.
Associated Products (2)Associated Documents - April 25, 2014•Document ID: 10243806Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- ReportF
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryPERFECT DELIVERY INSPECTION (PDI)
Associated Products (2)Associated Documents - April 24, 2014•Document ID: 10212672Service Bulletin/Repair InstructionsEQUIPMENT; STRUCTURE
- Mfr Comm. #:
- 27 14 23 2036392
- Date Added:
- May 31, 2022
- Manufacturer:
- AUDI
SummaryVibrations felt at 1000 rpm and 3000 rpm
Associated Products (10)Associated Documents - April 24, 2014•Document ID: 10210620Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STRUCTURE
- Mfr Comm. #:
- 27 14 23 2036392
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryThe basic settings of the active engine mounts in the subframe mount control module, J931, are deactivated when work is done on either of the vehicle electrical system control modules, J519 and/or J520 (for example, when a key is programmed). As a result, the vehicle vibrates or judders when cylinders are actively switched off.
Associated Products (10)Associated Documents - April 21, 2014•Document ID: 10212671Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 27 14 22 2036392
- Date Added:
- May 31, 2022
- Manufacturer:
- AUDI
SummaryVibrations felt at 1000 rpm and 3000 rpm
Associated Products (10)Associated Documents - April 21, 2014•Document ID: 10210619Service Bulletin/Repair InstructionsSTRUCTURE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 27 14 22 2036392
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryThe basic settings of the active engine mounts in the subframe mount control module, J931, are deactivated when work is done on either of the vehicle electrical system control modules, J519 and/or J520 (for example, when a key is programmed). As a result, the vehicle vibrates or judders when cylinders are actively switched off.
Associated Products (10)Associated Documents - April 21, 2014•Document ID: 10122360Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- A911438 2033780-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 13-83 dated May 2, 2013. Apple® devices with the new 8-pin plug will not play videos using the Audi Music Interface. The current Apple devices have a new plug assignment: the 30-pin plug has been replaced with an 8-pin plug. The old plug used an analog video transmission, whereas the new plug uses a digital video transmission that is not supported by the Audi Music Interface.
Associated Products (75)Associated Documents - April 21, 2014•Document ID: 10122334Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A271422 2036392-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 27 number 14-21 dated February 11, 2014. Vibrations are felt at 1000 rpm and 3000 rpm. DTCs may be stored in the subframe mount control module. The basic settings of the active engine mounts in the subframe mount control module, J931, are deactivated when work is done on either of the vehicle electrical system control modules. As a result, the vehicle vibrates or judders when cylinders are actively switched off.
Associated Products (10)Associated Documents - April 17, 2014•Document ID: 10250982Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 44144920225639
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummarySteering wheel shimmy, vibration, and/or oscillation
Associated Products (128)Associated Documents - April 17, 2014•Document ID: 10122338Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- A441449 2022563-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 44 number 13-44 dated November 21, 2013. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. The customer feels the vibration while driving at highway speeds from 55 - 80 mph (88 - 128 km/h). This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. If an applicable Repair Authorization is not followed, the claim will not be paid. The vibrations felt by the customer could be a result of the harmonic vibrations caused by the radial force variation (RFV) of the tires or an imbalance of the wheel and tire assembly. Tires with higher mileage and/or wear should be inspected to determine the best correction for the issue (repair or replacement). Tire life and condition should be determined prior to starting any diagnosis or repair for a vibration.
Associated Products (83)Associated Documents - April 14, 2014•Document ID: 10243803Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- GuidelinesA
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Delivery Guidelines
Associated Products (2)Associated Documents - April 14, 2014•Document ID: 10122391Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- PDI - 2015 A6-S6
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi Delivery guidelines and includes a predelivery checklist that ensures that final vehicle quality inspection is completed.
Associated Products (2)Associated Documents - April 14, 2014•Document ID: 10122335Service Bulletin/Repair InstructionsENGINE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- A271423 2036392-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 27 number 14-22 dated April 21, 2014. Vibrations are felt at 1000 rpm and 3000 rpm. DTCs may be stored in the subframe mount control module. The basic settings of the active engine mounts in the subframe mount control module, J931, are deactivated when work is done on either of the vehicle electrical system control modules. As a result, the vehicle vibrates or judders when cylinders are actively switched off.
Associated Products (10)Associated Documents - April 11, 2014•Document ID: 10250196Service Bulletin/Repair InstructionsTIRES; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- TableB
- Date Added:
- February 12, 2024
- Manufacturer:
- AUDI
SummaryAudi Normal Load Condition Tire Pressure Table
Associated Products (20)Associated Documents - April 11, 2014•Document ID: 10122384Service Bulletin/Repair InstructionsTIRES; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Normal Load Cond
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi normal load condition tire pressure table.
Associated Products (20)Associated Documents - April 10, 2014•Document ID: 10122397Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- PDI - 2015 ALL M
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi vehicle condition report initial vehicle inspection checklist.
Associated Products (19)Associated Documents - April 10, 2014•Document ID: 10122359Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A911437 2030947-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 13-92 dated July 16, 2013. The customer complains that when he or she is trying to place a phone call from the vehicle while using a Bluetooth®-connected phone, the phone call disconnects before it begins and an error shows on the MMI display. The message may be "Function not supported" or "Network error". The customer is using a phone with the Android operating system. In addition, Skype®, or another network-based communication software, is installed on the phone. Call can be placed directly from the phone without a problem. When the phone receives the request to place a call from the vehicle, a prompt appears on the phone asking the user to choose how the call should be placed. If the prompt is ignored, the MMI system disconnects the call because it assumes that the phone is not responding.
Associated Products (148)Associated Documents