Toyota C-HR Service Bulletins (2021)
106 manufacturer communications on file.
- April 14, 2020•Document ID: 10174902Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- T-SB-0037-20
- Date Added:
- May 11, 2020
- Manufacturer:
- TOYOTA
SummaryTSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.
Associated Products (14)Associated Documents - April 14, 2020•Document ID: 10174901Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- T-SB-0035-20
- Date Added:
- May 11, 2020
- Manufacturer:
- TOYOTA
SummaryTSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should check battery SOC and recharge, if necessary, no more than 48 hours before delivery to the customer.
Associated Products (14)Associated Documents - April 9, 2020•Document ID: 10174896Service Bulletin/Repair InstructionsVISIBILITY; LANE DEPARTURE
- Mfr Comm. #:
- T-TT-0537-19_Rev
- Date Added:
- May 11, 2020
- Manufacturer:
- TOYOTA
SummaryTT: The blind spot monitor (BSM) sensor angle inspection is used to confirm that the BSM sensor is within the specified angle before performing axis beam adjustment. When used in conjunction with the repair manual, these BSM tips leverage SSTs and readily available tools to support sensor angle confirmation in varying shop environments.
Associated Products (14)Associated Documents - March 16, 2020•Document ID: 10190459Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; BACK OVER PREVENTION
- Mfr Comm. #:
- T-TT-0599-20 Rev
- Date Added:
- April 19, 2021
- Manufacturer:
- TOYOTA
SummaryTT: Vehicle control apps might not operate as expected at times due to preconditions (normal operating parameters) not being established, vehicle settings and/or network/cellular coverage concerns.
Associated Products (11)Associated Documents - May 4, 2001•Document ID: 10197476Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- T-PG007-01
- Date Added:
- June 14, 2021
- Manufacturer:
- TOYOTA
SummaryReplacement vin plates.
Associated Products (15)Associated Documents - January 18, 1991•Document ID: 10197473Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- T-PG002-91
- Date Added:
- June 14, 2021
- Manufacturer:
- TOYOTA
SummaryProduct general information.
Associated Products (15)Associated Documents