Nissan Versa Service Bulletins (2021)
92 manufacturer communications on file.
- March 5, 2021•Document ID: 10190213Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- NTB19-071A
- Date Added:
- April 13, 2021
- Manufacturer:
- NISSAN
SummaryDTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (12)Associated Documents - March 3, 2021•Document ID: 10191987Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- PM970 2021 Versa
- Date Added:
- May 8, 2021
- Manufacturer:
- NISSAN
SummaryEngine Control Module (ECM) Reprogram Voluntary Service Campaign Dealer Announcement: Nissan has reclassified the previously announced quality action (PM968) for new vehicle inventory as a Voluntary Service Campaign to reprogram the Engine Control Module (ECM) on 846 specific 2021 Versa (N18) vehicles equipped with Manual Transmission and identified in Service Comm. Due to a program logic concern, a malfunction indicator light (MIL) for the coolant temperature sensor may illuminate unnecessarily while the engine is warming up. Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. What Dealers Should Do: PLEASE FOLLOW THE ATTACHED INSPECTION INSTRUCTIONS: 1.Verify if vehicles are affected by this Voluntary Service Campaign using Service Comm or DBS National Service History â Open Campaigns I.D. PM970. 2.Dealers are requested to remedy any affected vehicles in dealer new or pre-owned inventory to ensure customer satisfaction. â¢New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). ï§Refer to NPSB15-460 for additional information 3.Dealers should use NTB21-015 to correct any vehicles subject to this campaign. 4.Once repaired, dealers should submit the claim, using the claims coding provided, and release the vehicle.
Associated Products (1)Associated Documents - March 2, 2021•Document ID: 10191975Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- NTB21-015
- Date Added:
- May 8, 2021
- Manufacturer:
- NISSAN
SummaryVOLUNTARY SERVICE CAMPAIGN 2021 VERSA; ENGINE CONTROL MODULE INTRODUCTION Nissan is conducting this voluntary service campaign on certain specific model year 2021 Versa vehicles. The Engine Control Module (ECM) will be inspected, and reprogrammed if it applies. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PM970 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY Dealers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private parties, vehicles presented by transient (tourists) owners, and vehicles in a dealerâs inventory.
Associated Products (1)Associated Documents - March 2, 2021•Document ID: 10191973Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- NTB21-006A
- Date Added:
- May 8, 2021
- Manufacturer:
- NISSAN
SummaryMIL ON WITH DTC P0128 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (1)Associated Documents - February 26, 2021•Document ID: 10188376Service Bulletin/Repair InstructionsEQUIPMENT; POWER TRAIN; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- NTB21-013
- Date Added:
- March 6, 2021
- Manufacturer:
- NISSAN
SummaryPREVENT FRONT AXLE THREAD DAMAGE DURING NUT REMOVAL SERVICE INFORMATION If an Applied Vehicle needs to have a front axle nut removed, for any reason, the staking of the nut into the axle keyway must first be removed. The essential tool (part number # J-52982, Figure 1) required to remove the nut staking, is called out as a âCape Chiselâ in the Electronic Service Manual (ESM), and must be used to prevent thread damage to the axle (see Figure 2 on page 2). ï· The Cape Chisel arrived at dealers in December of 2020. ï· Damaged threads, due to improper removal of the stake placed in the nut, will not be covered by warranty. For information on using the Cape Chisel, refer to the Electronic Service Manual (ESM): Section TRANSMISSION & DRIVELINE > FRONT AXLE > REMOVAL AND INSTALLATION > FRONT DRIVE SHAFT > LH/RH.
Associated Products (6)Associated Documents - February 12, 2021•Document ID: 10188377Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- NTB99-001e
- Date Added:
- March 6, 2021
- Manufacturer:
- NISSAN
SummarySTRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (14)Associated Documents - February 3, 2021•Document ID: 10188323Service Bulletin/Repair InstructionsFORWARD COLLISION AVOIDANCE; VISIBILITY:WINDSHIELD; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB19-042b
- Date Added:
- March 6, 2021
- Manufacturer:
- NISSAN
SummaryAEB WARNING LIGHT BLINKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (11)Associated Documents - February 2, 2021•Document ID: 10188339Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; ENGINE AND ENGINE COOLING; EQUIPMENT
- Mfr Comm. #:
- PM968 2021 Versa
- Date Added:
- March 6, 2021
- Manufacturer:
- NISSAN
SummaryEngine Control Module (ECM) Reprogram Dealer Inventory *****Dealer Announcement***** Nissan is conducting a quality action to update the Engine Control Module (ECM) software on 625 specific model year 2021 Nissan Versa (N18) equipped with manual transmission. Due to a program logic concern, a malfunction indicator light (MIL) for the coolant temperature sensor may illuminate unnecessarily. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED INSPECTION INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History â Open Campaigns I.D. PM968 ⢠New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). ï§ Refer to NPSB 15-460 for additional information ⢠Please continue to check newly arriving inventory for campaign applicability. 2. Please do not drive, loan, sell or trade the specific vehicles in dealer inventory subject to this quality action. 3. Use the attached procedure to remedy any vehicles affected by this quality action. 4. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle. ***** Dealer Responsibility ***** It is the dealerâs responsibility to check Service Comm or DBS National Service History â Open Campaign using the appropriate campaign I.D for the inspection status on each affected vehicle currently in new vehicle inventory.
Associated Products (1)Associated Documents - January 28, 2021•Document ID: 10186854Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- NTB21-009
- Date Added:
- February 6, 2021
- Manufacturer:
- NISSAN
SummaryDTC B12A3-72 FOR FUEL PUMP RELAY STUCK OPEN SERVICE INFORMATION DTC B12A3-72 (Fuel Pump Relay Stuck Open) may be stored when the IPDM monitor circuit internally sees 0V to ground at pin #46. This is caused by an internal short to ground in the IPDM or one of the IPDM fuses listed below is open. If B12A3-72 is current or reoccurs after erasing DTCs, inspect the model specific fuse first. If the fuse is not open replace the IPDM. ï· Altima â Fuse # 58 (page 2) ï· Kicks â Fuse # 54 (page 3) ï· Versa â Fuse # 61 (page 4) For additional IPDM diagnostic information refer to the Electronic Service Manual (ESM): Section ELECTRICAL & POWER CONTROL > POWER CONTROL SYSTEM > IPDM E/R. See model specific fuse locations starting on page 2.
Associated Products (3)Associated Documents - January 25, 2021•Document ID: 10186852Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- NTB21-006
- Date Added:
- February 6, 2021
- Manufacturer:
- NISSAN
SummaryMIL ON WITH DTC P0128 STORED IF YOU CONFIRM The MIL is ON and DTC P0128 (THERMSTAT FNCTN) is stored in the ECM, AND There are no drivability concerns. ACTION 1. Confirm the current ECM part number. 2. Reprogram the ECM, if applicable.
Associated Products (1)Associated Documents - December 23, 2020•Document ID: 10185483Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; EXTERIOR LIGHTING; EQUIPMENT
- Mfr Comm. #:
- PM965 2020-21 Ve
- Date Added:
- January 9, 2021
- Manufacturer:
- NISSAN
SummaryFront Turn Signal Lamp Dealer Inventory Dealer Announcement Nissan is conducting a dealer inventory quality action to inspect both front turn signal lamp bulbs and, if necessary, replace them on 3,251 specific model year 2020 -2021 Versa vehicles identified in Service Comm. Due to a supplier concern that has since been resolved, the installed front turn signal bulbs may have durability issues that could cause them to not perform to specification. Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. What Dealers Should Do PLEASE FOLLOW THE ATTACHED INSPECTION INSTRUCTIONS: 1.Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History â Open Campaigns I.D. PM965 â¢New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). ï§Refer to NPSB 15-460 for additional information â¢Please continue to check newly arriving inventory for campaign applicability. 2.Use the attached procedure to inspect the turn signal lamp bulb and, if necessary, remedy any vehicles affected by this quality action. â¢Parts may be ordered via normal parts ordering system beginning January 04, 2020. 3.The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm. Dealer Responsibility It is the dealerâs responsibility to check Service Comm or DBS National Service History â Open Campaign using the appropriate campaign I.D for the inspection status on each affected vehicle currently in new vehicle inventory.
Associated Products (1)Associated Documents - November 5, 2020•Document ID: 10184016Service Bulletin/Repair InstructionsFORWARD COLLISION AVOIDANCE; LANE DEPARTURE: SENSING SYSTEM: CAMERA
- Mfr Comm. #:
- NTB19-042a
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
SummaryAEB WARNING LIGHT BLINKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (10)Associated Documents