Mitsubishi Mirage Service Bulletins (2014)
132 manufacturer communications on file.
- March 11, 2016•Document ID: 10103125Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- TIN-16-11-001
- Date Added:
- June 5, 2017
- Manufacturer:
- MITSUBISHI
SummaryTHIS IS A TECHNICAL INFORMATION NOTICE SENT TO DEALERS TO INFORM THEM OF A TEMPORARY BACK ORDER OF THE LONG BLOCK ENGINE PART NUMBER LISTED IN SC-16-001REV, ECM REPROGRAMMING FOR ENGINE KNOCKING NOISE FOR CERTAIN 2014 2015 MIRAGE VEHICLES.
Associated Products (2)Associated Documents - March 7, 2016•Document ID: 10194148Service Bulletin/Repair InstructionsBACK OVER PREVENTION
- Mfr Comm. #:
- ATIN16SC001C
- Date Added:
- May 24, 2021
- Manufacturer:
- MITSUBISHI
SummaryECM Rreprogramming for Engine Knocking Noise - Service Campaign - Revised
Associated Products (2)Associated Documents - March 7, 2016•Document ID: 10183863Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- ATIN-16-SC-001-C
- Date Added:
- December 7, 2020
- Manufacturer:
- MITSUBISHI
SummaryECM reprogramming for engine knocking noise service campaign revised.
Associated Products (2)Associated Documents - March 7, 2016•Document ID: 10103124Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SC-16-001REV
- Date Added:
- June 5, 2017
- Manufacturer:
- MITSUBISHI
SummaryTHIS IS A REVISED VERSION OF SERVICE CAMPAIGN SC-16-001, WHICH PROVIDES INSTRUCTIONS FOR DEALERS TO REPROGRAM THE ECM WITH NEW SOFTWARE ON ALL AFFECTED VEHICLES, TO RECTIFY POSSIBLE ENGINE NOISE DURING COLD START.
Associated Products (2)Associated Documents - March 7, 2016•Document ID: 10103123Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ENGINE
- Mfr Comm. #:
- ATIN-16-SC-001-C
- Date Added:
- June 5, 2017
- Manufacturer:
- MITSUBISHI
SummaryTHIS IS AN ADVANCE TECHNICAL INFORMATION NOTICE THAT WAS PROVIDED TO DEALERS TO INFORM THEM THAT A REVISED SERVICE CAMPAIGN BULLETIN WILL BE RELEASED FOR ECM REPROGRAMMING FOR ENGINE KNOCKING NOISE.
Associated Products (2)Associated Documents - March 1, 2016•Document ID: 10194159Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; EQUIPMENT
- Mfr Comm. #:
- SC-16-001REV
- Date Added:
- May 24, 2021
- Manufacturer:
- MITSUBISHI
SummaryECM Reprogramming for engine knocking noise - Service Campaign - Revised This bulletin supercedes SC-16-001, issued February, 2016 to add a Code 209 Restriction on new engines, detailed procedures required by dealers before ordering a new engine, and a Sample customer letter. Revisions are italicized and indicated by - During cold start, the engine ECU may order inappropriate fuel amounts which may cause efangine noise.
Associated Products (2)Associated Documents - March 1, 2016•Document ID: 10183867Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- TT-219
- Date Added:
- December 7, 2020
- Manufacturer:
- MITSUBISHI
SummaryTracking device inserted in DLC causing false DTCs.
Associated Products (2)Associated Documents - March 1, 2016•Document ID: 10183857Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SC-16-001REV
- Date Added:
- December 7, 2020
- Manufacturer:
- MITSUBISHI
SummaryDuring the cold start, the engine ECU may order inappropriate fuel amounts which may cause engine noise.
Associated Products (2)Associated Documents - February 19, 2016•Document ID: 10103105Service Bulletin/Repair InstructionsENGINE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- SC-16-001 CUSTOM
- Date Added:
- June 5, 2017
- Manufacturer:
- MITSUBISHI
SummaryTHIS IS THE LETTER SENT TO OWNERS OF VEHICLES COVERED BY SC-16-001.
Associated Products (2)Associated Documents - February 17, 2016•Document ID: 10194147Service Bulletin/Repair InstructionsBACK OVER PREVENTION
- Mfr Comm. #:
- ATIN16SC001B
- Date Added:
- May 24, 2021
- Manufacturer:
- MITSUBISHI
SummaryECM Reprogramming for Engine Knocking Noise - Service Campaign-Cuctomer Letters.
Associated Products (2)Associated Documents - February 17, 2016•Document ID: 10103110Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE
- Mfr Comm. #:
- ATIN-16-SC-001-B
- Date Added:
- June 5, 2017
- Manufacturer:
- MITSUBISHI
SummaryTHIS IS AN ADVANCE TECHNICAL INFORMATION NOTICE SENT TO DEALERS TO INFORM THEM THAT CUSTOMER LETTERS FOR SC-16-001 WILL BE SENT OUT. THIS NOTICE ALSO INFORMED DEALERS TO ADDRESS SAFETY RECALL SR-16-001 AT THE SAME TIME AS THIS SERVICE CAMPAIGN IN ORDER TO REDUCE POSSIBLE INCONVENIENCES.
Associated Products (2)Associated Documents - February 17, 2016•Document ID: 10075159Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ENGINE
- Mfr Comm. #:
- SB-ATIN16SC001-B
- Date Added:
- June 22, 2016
- Manufacturer:
- MITSUBISHI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - February 5, 2016•Document ID: 10194146Service Bulletin/Repair InstructionsBACK OVER PREVENTION
- Mfr Comm. #:
- ATIN16SC001A
- Date Added:
- May 24, 2021
- Manufacturer:
- MITSUBISHI
SummaryECM Reprogramming for Engine Knocking Noise - Service Campaign
Associated Products (2)Associated Documents - February 5, 2016•Document ID: 10103107Service Bulletin/Repair InstructionsEQUIPMENT:MECHANICAL; SEATS
- Mfr Comm. #:
- TSB-16-52A-001
- Date Added:
- June 5, 2017
- Manufacturer:
- MITSUBISHI
SummaryTHIS IS A TECHNICAL SERVICE BULLETIN SENT TO DEALERS TO INSTRUCT THEM ON HOW TO ADJUST AND SYNCHRONIZE THE FRONT SEAT SLIDE RAIL LOCK POSITION TIMING ON VEHICLES WHERE THE CUSTOMER REPORTS A CONDITION WHERE, AFTER ADJUSTING THE SEAT SLIDE POSITION (FORWARD OR REARWARD), ONE OF THE SEAT RAILS DOES NOT LOCK INTO POSITION WHEN THE ADJUSTER BAR IS RELEASED.
Associated Products (2)Associated Documents - February 5, 2016•Document ID: 10103104Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SC-16-001
- Date Added:
- June 5, 2017
- Manufacturer:
- MITSUBISHI
SummaryTHIS SERVICE CAMPAIGN BULLETIN INSTRUCTS DEALERS TO REPROGRAM THE ECM WITH NEW SOFTWARE ON ALL AFFECTED VEHICLES, TO RECTIFY POSSIBLE ENGINE NOISE DURING COLD START.
Associated Products (2)Associated Documents - February 5, 2016•Document ID: 10103103Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- ATIN-16-SC-001-A
- Date Added:
- June 5, 2017
- Manufacturer:
- MITSUBISHI
SummaryTHIS IS AN ADVANCED NOTICE TO DEALERS INFORMING THEM THAT A CAMPAIGN BULLETIN REGARDING ECM REPROGRAMMING ON CERTAIN 2014 2015 MIRAGE VEHICLES, WHERE DURING COLD START, THE ENGINE ECU MAY ORDER INAPPROPRIATE FUEL AMOUNTS WHICH MAY CAUSE ENGINE NOISE, WILL BE FORTHCOMING. THE CAMPAIGN BULLETIN WILL INSTRUCT DEALERS TO REPROGRAM THE ECM WITH NEW SOFTWARE ON ALL AFFECTED VEHICLES, AND IN RARE CASES, IF THE VEHICLE EXHIBITS AN ENGINE KNOCKING NOISE, THE ENGINE MAY NEED TO BE REPLACED.
Associated Products (2)Associated Documents - February 5, 2016•Document ID: 10075158Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ENGINE
- Mfr Comm. #:
- SB-ATIN16SC001-A
- Date Added:
- June 22, 2016
- Manufacturer:
- MITSUBISHI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - February 2, 2016•Document ID: 10103101Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 54-MG-01-16
- Date Added:
- June 5, 2017
- Manufacturer:
- MITSUBISHI
SummaryTHIS IS A PARTS BULLETIN INFORMING DEALERS THAT THERE WILL BE TWO FORCED SHIPMENTS OF THE NECESSARY PARTS TO COMPLETE SR-16-001 REPAIRS.
Associated Products (2)Associated Documents - February 1, 2016•Document ID: 10194158Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE
- Mfr Comm. #:
- SC-16-001
- Date Added:
- May 24, 2021
- Manufacturer:
- MITSUBISHI
SummaryEMC Reprogramming for engine knocking noise - Service Campaign - During cold start, the engine ECU may order inapprokpriate fuel amounts which may caus e engine noise. This campaign bulletin instructs dealers to reprogram the ECM with new software on all affected vehicles. In rare cases, if the vehicle exhibits an enggine knocking noise, the fengine may need to be replaced.
Associated Products (2)Associated Documents - February 1, 2016•Document ID: 10194144Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 54-MG-01-16
- Date Added:
- May 24, 2021
- Manufacturer:
- MITSUBISHI
SummarySRS-CONNECTOR CORROSION-SAFETY RECALL CAMPAIGN.
Associated Products (2)Associated Documents