MINI Cooper Service Bulletins (2013)
177 manufacturer communications on file.
- April 1, 2013•Document ID: 10149504Service Bulletin/Repair InstructionsEQUIPMENT; TIRES; WHEELS
- Mfr Comm. #:
- M360113
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
Summary"MINI GP: Choice of Tire Option Agreement and Alternate Tire Retrofit. The Kumho 215/40 R17 Ecsta V700 sport tire performance optimization results in vehicle operation limitations, specifically when operated in cold climates or on wet, slushy or snow-covered roads. If your MINI JCW GP owner prefers a set of tires that better fits his/her driving style and climate, these owners can swap out the factory-original equipment (OE) Kumho 215/40 R17 Ecsta V700 sport tires for a set of the following MINI approved alternate tires: ??205/45R17 84W John Cooper Works performance run-flat tires Please refer to the attached MINI Product Planning & Strategy Bulletin M-20-0313-0012, ""MINI John Cooper Works GP Unleashed,"" for more information, including the required ""choice of tire option"" agreement form."
Associated Products (7)Associated Documents - April 1, 2013•Document ID: 10149503Service Bulletin/Repair InstructionsSTEERING; SUSPENSION
- Mfr Comm. #:
- M320213
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummaryService Action: Retrofit John Cooper Works Steering Wheel Gearshift Paddles. A number of these vehicles were inadvertently produced without the standard gearshift paddles. Vehicle option ordering error
Associated Products (7)Associated Documents - April 1, 2013•Document ID: 10149502Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- M120212
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummarySI M12 02 12 Engine Electrical Systems April 2013 Technical Service . After reprogramming the vehicle to integration level R056-11-11-503 (ISTA/P P45.1.3.0) or higher, one of the following fault codes are stored in the DME fault memory: Vehicles with N16 engine: * 2F42 Engine ventilation heating, Control The Service Engine Soon lamp is not illuminated. Vehicles with N18 engine: * 37DE Engine ventilation, heating, triggering: open circuit The Service Engine Soon lamp is illuminated. CAUSE Due to a DME software change, the diagnostic monitoring capability is improved for the engine ventilation heating system. However, a fault will be stored in the fault memory because the engine ventilation heater circuit has a malfunction currently present.
Associated Products (10)Associated Documents - April 1, 2013•Document ID: 10149501Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- M110113
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummaryService Action: Replace the Coolant Pump. Coolant is leaking from the coolant pump. CAUSE The coolant pump may develop cracks in the plastic housing. These cracks may result in a coolant leak.
Associated Products (14)Associated Documents - April 1, 2013•Document ID: 10149500Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- M110112
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummaryEngine Oil Leak. The customer states that a small engine oil leak can be seen from the underside of the engine. CAUSE The internal sealing of the oil pump volume control solenoid valve is compromised, allowing engine oil to leak from the oil pump volume control solenoid.
Associated Products (15)Associated Documents - March 1, 2013•Document ID: 10150148Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; EQUIPMENT
- Mfr Comm. #:
- M650313
- Date Added:
- December 3, 2018
- Manufacturer:
- MINI
SummaryBasic SVS: Voice Recognition Inoperative After Programming. After programming the vehicle with ISTA/P 2.48.x, the voice recognition (Basic SVS) is inoperative. NOTE: The Basic SVS only includes voice recognition for phone functions. Error in the coding data of ISTA/P 2.48.x The voice recognition function is unintentionally deactivated.
Associated Products (9)Associated Documents - March 1, 2013•Document ID: 10150147Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; EQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- M650213
- Date Added:
- December 3, 2018
- Manufacturer:
- MINI
Summary"CHAMP2: Stored Radio Stations Deleted After Ignition Off. After ignition off, the stored radio stations (AM/FM and Satellite radio) are no longer available in: * Menu ""PRESETS"" * Preset buttons on the head unit Hardware error in the CHAMP2 head unit"
Associated Products (9)Associated Documents - March 1, 2013•Document ID: 10150145Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- M210113
- Date Added:
- December 3, 2018
- Manufacturer:
- MINI
SummaryClutch Is Slipping or Grabbing. The customer states that the clutch is slipping or grabbing.
Associated Products (12)Associated Documents - February 1, 2013•Document ID: 10149469Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- M840113
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummaryTelephone: Phonebook Does Not Transfer to the Vehicle. The telephone book does not transfer to the vehicle after the pairing process is completed. CAUSE Software error in the head unit
Associated Products (9)Associated Documents - February 1, 2013•Document ID: 10149468Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- M650113
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummaryCHAMP2: Integrated Cooling Fan Is Noisy Intermittently. INFORMATION Do not replace parts and do not perform a repair attempt! Explain to the customer that this only happens at high ambient temperatures, which keep the fan running after the ignition is turned off. This Service Information will be updated as soon as a solution is available. A software solution is expected to be available with ISTA/P 2.49.0 in March 2013. New integration level: R056-13-03-501 or higher.
Associated Products (7)Associated Documents - February 1, 2013•Document ID: 10149465Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- M320113
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummaryNoise from Steering Column when Turning or Adjusting Height. A squeaking noise is heard from the area around the steering column when turning or adjusting its height. CAUSE Material contact between the upper steering column bearing inner race and the plastic sleeve
Associated Products (4)Associated Documents - February 1, 2013•Document ID: 10149464Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- M120113
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
Summary"N16 Engine: FC 2D9B Knock Sensor, Signal Is Stored in the DME. Certain areas of the US experience extremely cold climate conditions during the winter months, which can cause the Service Engine Soon lamp to illuminate while the engine temperature is increasing to full operating temperature. The following fault may be stored in the DME: FC 2D9B Knock Sensor, Signal While performing test plan B1214 M KNOCK SENSOR, the following error message will be displayed: ""An error has occurred during execution of a service program. Fault code: 61/3."" This error in the test plan will not allow diagnosis to continue. The test plan error will be repaired with ISTA/D 2.36.0. CAUSE A DME calibration error in the knock sensor diagnostics results in an increased sensitivity threshold to cold temperatures."
Associated Products (13)Associated Documents - February 1, 2013•Document ID: 10051919Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN
- Mfr Comm. #:
- SIM-65-01-13
- Date Added:
- April 19, 2013
- Manufacturer:
- MINI
SummaryMINI: INTEGRATED COOLING FAN IS NOISY INTERMITTENTLY. THIS NOISE MAY BE MORE NOTICEABLE AFTER THE IGNITION IS TURNED OFF. MODELS R55, R56, R57, R58, R59, AND R60. *KB
Associated Products (6)Associated Documents - January 1, 2013•Document ID: 10149332Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- M340113
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummaryErroneous "Service due" Message Though Brake Lining Thickness Sufficient. The CBS data calculated for the remaining distance of the front and/or rear brake pads does not agree with the actual brake pad thickness. The yellow brake lining service due indicator illuminates even though the pad thickness is greater than the minimum wear limit (approximately 3.7 mm); the brake wear sensor has not yet been activated (from a thickness of approx. 4.2 mm). In some cases, the red warning message may already be active. The CBS front/rear brake display is based on a mathematical calculation. Various influences are incorporated into this calculation (for example, vehicle speed, brake pressure, and rotor temperature). Due to changing driving characteristics and/or unfavorable environmental conditions, the calculated remaining distance may differ from actual pad thickness.
Associated Products (15)Associated Documents - January 1, 2013•Document ID: 10149331Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- M340112
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummaryABS/DSC Control During Light Braking. When driving slowly over uneven road surfaces, there may sometimes be pre-mature ABS application relative to the driving situation with the brake lightly applied. Software in the Dynamic Stability Control unit (DSC)
Associated Products (9)Associated Documents - January 1, 2013•Document ID: 10149330Service Bulletin/Repair InstructionsSUSPENSION:FRONT:WHEEL BEARING
- Mfr Comm. #:
- M330212
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummaryCracking or Popping Noise from Rear Axle. A cracking or popping noise is heard from the rear axle during take-offs or during load reversal. CAUSE Rear axle nut incorrectly torqued
Associated Products (4)Associated Documents - January 1, 2013•Document ID: 10149329Service Bulletin/Repair InstructionsSUSPENSION:FRONT:WHEEL BEARING
- Mfr Comm. #:
- M310312
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummaryCracking or Popping Noise from Front Axle. A cracking or popping noise is heard from the front axle during take-offs or during load reversal CAUSE Front axle nut not correctly torqued
Associated Products (4)Associated Documents - January 1, 2013•Document ID: 10149327Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- M170912
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummaryService Action: Retrofit of the Engine Coolant Temperature Sensor. Internal corrosion could form in the engine coolant temperature sensor. This corrosion leads to internal bridging of the contacts, which can cause an inaccurate engine temperature reading. This false reading could lead to difficulty in the engine starting and/or a "Service Engine Soon" lamp being illuminated.
Associated Products (8)Associated Documents - January 1, 2013•Document ID: 10149326Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- M170812
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummaryService Action: Retrofit of the Engine Coolant Temperature Sensor. Internal corrosion could form in the engine coolant temperature sensor. This corrosion leads to internal bridging of the contacts, which can cause an inaccurate engine temperature reading. This false reading could lead to difficulty in the engine starting and/or a "Service Engine Soon" lamp being illuminated.
Associated Products (8)Associated Documents - January 1, 2013•Document ID: 10149325Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- M170712
- Date Added:
- November 26, 2018
- Manufacturer:
- MINI
SummaryService Action: Retrofit of the Engine Coolant Temperature Sensor. Internal corrosion could form in the engine coolant temperature sensor. This corrosion leads to internal bridging of the contacts, which can cause an inaccurate engine temperature reading. This false reading could lead to difficulty in the engine starting and/or a "Service Engine Soon" lamp being illuminated.
Associated Products (12)Associated Documents