Lexus RX Service Bulletins (2021)
44 manufacturer communications on file.
- April 19, 2024•Document ID: 11003650Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0023-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryTo prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Associated Products (50)Associated Documents - April 19, 2024•Document ID: 11003648Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0024-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryThe condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. •The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
Associated Products (51)Associated Documents - April 19, 2024•Document ID: 11003643Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0022-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryAcid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Associated Products (46)Associated Documents - April 19, 2024•Document ID: 11003642Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0021-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryLexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. •The entire bulletin has been updated.
Associated Products (46)Associated Documents - April 19, 2024•Document ID: 11003641Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0020-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryVehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
Associated Products (46)Associated Documents - April 19, 2024•Document ID: 11003595Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0023-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryTo prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Associated Products (50)Associated Documents - April 19, 2024•Document ID: 11003593Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0024-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryThe condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. •The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
Associated Products (51)Associated Documents - April 19, 2024•Document ID: 11003588Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0022-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryAcid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Associated Products (46)Associated Documents - April 19, 2024•Document ID: 11003587Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0021-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryLexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. •The entire bulletin has been updated.
Associated Products (46)Associated Documents - April 19, 2024•Document ID: 11003586Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0020-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryVehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
Associated Products (46)Associated Documents - February 20, 2024•Document ID: 10252258Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); UNKNOWN OR OTHER
- Mfr Comm. #:
- LSB005722
- Date Added:
- April 1, 2024
- Manufacturer:
- LEXUS
SummaryTSB: Some 2018 ? 2022 model year Lexus vehicles equipped with the Enform? 2.0 Navigation System, require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an activation card number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
Associated Products (14)Associated Documents - November 15, 2023•Document ID: 10247804Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- LSB006023
- Date Added:
- December 26, 2023
- Manufacturer:
- LEXUS
SummaryTSB: Some 2019 ? 2023 model year ES 350, 2018 ? 2023 model year IS 350, IS 300, RC 350, RC 300, 2016 ? 2022 model year RX 350, and 2016 ? 2020 model year GS 350 vehicles equipped with a 2GR-FKS engine may exhibit a knocking noise from the vacuum pump at idle. Follow the Repair Procedure in this bulletin to improve this condition.
Associated Products (11)Associated Documents - October 24, 2023•Document ID: 10245485Service Bulletin/Repair InstructionsTRAILER HITCHES
- Mfr Comm. #:
- 23LD01 Dealer Pa
- Date Added:
- November 27, 2023
- Manufacturer:
- LEXUS
SummaryDP: The involved vehicles equipped with the Tow Prep Package did not have the Tow Converter installed.
Associated Products (1)Associated Documents - October 18, 2023•Document ID: 10245475Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 22LC01 Technical
- Date Added:
- November 27, 2023
- Manufacturer:
- LEXUS
SummaryTI: TECHNICAL INSTRUCTIONS FOR 22LC01 DATA COMMUNICATION MODULE (DCM) REPROGRAMMING CERTAIN 2021 MODEL YEAR IS300, IS350, LC500, LC500h, LC500C, LS500, LS500h, NX300, NX300h, RC300, RC350, RC F CERTAIN 2021-2022 RX350, RX350L, RX450h, RX450hL CERTAIN 2022 GX460
Associated Products (8)Associated Documents - October 2, 2023•Document ID: 10245447Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; SERVICE BRAKES
- Mfr Comm. #:
- L-SB-0032-23 Rev
- Date Added:
- November 27, 2023
- Manufacturer:
- LEXUS
SummaryTSB: Some 2016 ? 2022 model year RX 450h and 2018 ? 2022 model year RX 450hL vehicles may exhibit a squawk/knock noise from the engine compartment when depressing and/or releasing the brake pedal. Follow the Repair Procedure in this bulletin to address this condition.
Associated Products (2)Associated Documents - August 21, 2023•Document ID: 10244114Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- LSB004323
- Date Added:
- October 16, 2023
- Manufacturer:
- LEXUS
SummaryTSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks.
Associated Products (32)Associated Documents - August 17, 2023•Document ID: 10244110Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; COMMUNICATION:MANUFACTURER TELEMATICS
- Mfr Comm. #:
- LTT032623
- Date Added:
- October 16, 2023
- Manufacturer:
- LEXUS
SummaryTT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features.
Associated Products (35)Associated Documents - July 3, 2023•Document ID: 10241386Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- L-SB-0037-23
- Date Added:
- August 28, 2023
- Manufacturer:
- LEXUS
SummaryTSB: Some 2021 ? 2024 model year Lexus vehicles use hub bolts in place of studs/nuts to fasten the wheels to the vehicle. If non-compatible wheels or hub bolts/nuts are installed, there is increased risk that the wheel(s) could come off resulting in a crash. This service bulletin outlines the physical differences and precautions that should be taken when servicing different wheel and wheel fastener types.
Associated Products (35)Associated Documents - June 7, 2022•Document ID: 10215217Service Bulletin/Repair InstructionsEQUIPMENT; STRUCTURE
- Mfr Comm. #:
- TECHNICAL INSTRU
- Date Added:
- July 5, 2022
- Manufacturer:
- LEXUS
SummaryTECHNICAL INSTRUCTIONS.
Associated Products (4)Associated Documents - May 11, 2022•Document ID: 10220152Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- Service Campaign
- Date Added:
- September 15, 2022
- Manufacturer:
- LEXUS
SummaryDP: Due to improper programming of the Data Communication Module (DCM), which provides cellular communication in various situations, including emergencies, the driver and Safety Connect operator may not be able to hear each other?s voices during a Safety Connect call
Associated Products (2)Associated Documents