Jeep Cherokee Service Bulletins (2016)
450 manufacturer communications on file.
- June 21, 2016•Document ID: 10218262Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 03-003-16
- Date Added:
- August 22, 2022
- Manufacturer:
- CHRYSLER
SummaryDrivetrain Control Module (DTCM) This bulletin involves replacing and reconfiguring the Drivetrain Control Module (DTCM) with the latest available software. Some vehicles may experience a constant high pitched whine coming from rear axle area.
Associated Products (5)Associated Documents - June 21, 2016•Document ID: 10140129Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 03-003-16
- Date Added:
- June 11, 2018
- Manufacturer:
- JEEP
SummaryDrivetrain Control Module (DTCM) This bulletin involves replacing and reconfiguring the Drivetrain Control Module (DTCM) with the latest available software. Some vehicles may experience a constant high pitched whine coming from rear axle area.
Associated Products (5)Associated Documents - June 21, 2016•Document ID: 10082435Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 03-003-16
- Date Added:
- October 14, 2016
- Manufacturer:
- CHRYSLER
Summary"DRIVETRAIN CONTROL MODULE (DTCM) THIS BULLETIN INVOLVES REPLACING AND RECONFIGURING THE DRIVETRAIN CONTROL MODULE (DTCM) WITH THE LATEST AVAILABLE SOFTWARE. SOME VEHICLES MAY EXPERIENCE A CONSTANT HIGH PITCHED WHINE COMING FROM REAR AXLE AREA."
Associated Products (5)Associated Documents - June 16, 2016•Document ID: 10217617Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 18-068-16
- Date Added:
- August 8, 2022
- Manufacturer:
- JEEP
SummaryMIL Illumination: DTCs P112C and/or P112D This bulletin involves replacing the Post Catalyst Position O2 Sensor. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) stored or active: · P112C - O2 Sensor 2/1 Pumping Undercurrent. · P112D - O2 Sensor 2/1 Pumping Overcurrent.
Associated Products (2)Associated Documents - June 16, 2016•Document ID: 10140127Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 18-068-16
- Date Added:
- June 11, 2018
- Manufacturer:
- JEEP
SummaryMIL Illumination: DTCs P112C and/or P112D This bulletin involves replacing the Post Catalyst Position O2 Sensor. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) stored or active: · P112C - O2 Sensor 2/1 Pumping Undercurrent. · P112D - O2 Sensor 2/1 Pumping Overcurrent.
Associated Products (2)Associated Documents - June 16, 2016•Document ID: 10080063Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- 18-068-16
- Date Added:
- September 14, 2016
- Manufacturer:
- JEEP
Summary" MIL ILLUMINATION: DTCS P112C AND/OR P112D THIS BULLETIN INVOLVES REPLACING THE POST CATALYST POSITION O2 SENSOR. A SMALL NUMBER OF CUSTOMERS MAY EXPERIENCE A MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION. UPON FURTHER INVESTIGATION THE TECHNICIAN MAY FIND THE FOLLOWING DIAGNOSTIC TROUBLE CODES (DTCS) STORED OR ACTIVE: · P112C - O2 SENSOR 2/1 PUMPING UNDERCURRENT. · P112D - O2 SENSOR 2/1 PUMPING OVERCURRENT. "
Associated Products (2)Associated Documents - June 14, 2016•Document ID: 10217602Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 09-008-16
- Date Added:
- August 8, 2022
- Manufacturer:
- JEEP
Summary2.0L Or 2.4L Engine Replacement This bulletin involves replacing the long block due to a crankshaft imbalance condition. These vehicles may exhibit a vibration in the engine.
Associated Products (5)Associated Documents - June 14, 2016•Document ID: 10217601Service Bulletin/Repair InstructionsPOWER TRAIN; STEERING; EXTERIOR LIGHTING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-039-16 REV. A
- Date Added:
- August 8, 2022
- Manufacturer:
- JEEP
SummaryTransmission Wiring Harness Repair Or Replacement For No Start Or Stiff Steering This bulletin involves inspecting the transmission wire harness and installing mastic patch. If rub through is visible replace wire harness. A small number of customers may experience a no start condition, stiff steering or a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs): · U0131 - Lost Communication With Power Steering Control Module. · U0100-00 - Lost Communication With ECM/PCM. · P0512-00 - Starter Request Circuit.
Associated Products (3)Associated Documents - June 14, 2016•Document ID: 10140112Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 09-008-16
- Date Added:
- June 11, 2018
- Manufacturer:
- JEEP
Summary2.0L Or 2.4L Engine Replacement This bulletin involves replacing the long block due to a crankshaft imbalance condition. These vehicles may exhibit a vibration in the engine.
Associated Products (5)Associated Documents - June 14, 2016•Document ID: 10140111Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 08-039-16 REV. A
- Date Added:
- June 11, 2018
- Manufacturer:
- JEEP
SummaryTransmission Wiring Harness Repair Or Replacement For No Start Or Stiff Steering This bulletin involves inspecting the transmission wire harness and installing mastic patch. If rub through is visible replace wire harness. A small number of customers may experience a no start condition, stiff steering or a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs): · U0131 - Lost Communication With Power Steering Control Module. · U0100-00 - Lost Communication With ECM/PCM. · P0512-00 - Starter Request Circuit.
Associated Products (3)Associated Documents - June 14, 2016•Document ID: 10080160Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 08-039-16 REV.A
- Date Added:
- September 15, 2016
- Manufacturer:
- JEEP
Summary"TRANSMISSION WIRING HARNESS REPAIR OR REPLACEMENT FOR NO START OR STIFF STEERING THIS BULLETIN INVOLVES INSPECTING THE TRANSMISSION WIRE HARNESS AND INSTALLING MASTIC PATCH. IF RUB THROUGH IS VISIBLE REPLACE WIRE HARNESS. A SMALL NUMBER OF CUSTOMERS MAY EXPERIENCE A NO START CONDITION, STIFF STEERING OR A MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION. UPON FURTHER INVESTIGATION THE TECHNICIAN MAY FIND THE FOLLOWING DIAGNOSTIC TROUBLE CODES (DTCS): · U0131 - LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE. · U0100-00 - LOST COMMUNICATION WITH ECM/PCM. · P0512-00 - STARTER REQUEST CIRCUIT."
Associated Products (3)Associated Documents - June 14, 2016•Document ID: 10080068Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 09-008-16
- Date Added:
- September 14, 2016
- Manufacturer:
- DODGE
Summary"2.0L OR 2.4L ENGINE REPLACEMENT THIS BULLETIN INVOLVES REPLACING THE LONG BLOCK DUE TO A CRANKSHAFT IMBALANCE CONDITION. THESE VEHICLES MAY EXHIBIT A VIBRATION IN THE ENGINE."
Associated Products (6)Associated Documents - June 11, 2016•Document ID: 10217611Service Bulletin/Repair InstructionsEQUIPMENT; STRUCTURE
- Mfr Comm. #:
- 23-028-16
- Date Added:
- August 8, 2022
- Manufacturer:
- JEEP
SummaryRattle/Squeak From Rear Seat Armrest This bulletin involves inspecting the rear seat cushion frame for metal to metal contact, resulting in rattle noise. The customer may describe a rattle from the 60% portion of the rear seat. Metal to metal contact may be heard in either area.
Associated Products (3)Associated Documents - June 11, 2016•Document ID: 10140121Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 23-028-16
- Date Added:
- June 11, 2018
- Manufacturer:
- JEEP
SummaryRattle/Squeak From Rear Seat Armrest This bulletin involves inspecting the rear seat cushion frame for metal to metal contact, resulting in rattle noise. The customer may describe a rattle from the 60% portion of the rear seat. Metal to metal contact may be heard in either area.
Associated Products (3)Associated Documents - June 9, 2016•Document ID: 10226266Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 0806816
- Date Added:
- November 21, 2022
- Manufacturer:
- JEEP
SummaryFlash: Anti Lock Brake (ABS) Module System Enhancements This bulletin involves updating the Anit-Lock Brake System (ABS) module software. A small number of vehicles may have mismapped Diagnostic Trouble Codes (DTCs) below pointing to the wrong modules with no Malfunction Indicator Lamp (MIL) illumination: NOTE: This update should be performed to reduce the potential for misdiagnosis of related systems and incorrect module replacement. · U0100-00 - Lost Communication With ECM/PCM. · U0140-00 - Lost Communication With Body Control Module. · U0101-00 - Lost Communication With TCM. · U0402-00 - Implausible Data Received From TCM.
Associated Products (2)Associated Documents - June 9, 2016•Document ID: 10137052Service Bulletin/Repair InstructionsSERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-068-16
- Date Added:
- May 21, 2018
- Manufacturer:
- DODGE
SummaryFlash: Anti Lock Brake (ABS) Module System Enhancements This bulletin involves updating the Anit-Lock Brake System (ABS) module software. A small number of vehicles may have mismapped Diagnostic Trouble Codes (DTCs) below pointing to the wrong modules with no Malfunction Indicator Lamp (MIL) illumination: NOTE: This update should be performed to reduce the potential for misdiagnosis of related systems and incorrect module replacement. · U0100-00 - Lost Communication With ECM/PCM. · U0140-00 - Lost Communication With Body Control Module. · U0101-00 - Lost Communication With TCM. · U0402-00 - Implausible Data Received From TCM.
Associated Products (2)Associated Documents - June 2, 2016•Document ID: 10219821Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR
- Mfr Comm. #:
- 23-023-16
- Date Added:
- September 15, 2022
- Manufacturer:
- JEEP
SummaryLeft Rear Door Replacement Due to A Split Or Strain In The Sheet Metal This bulletin involves inspecting the left rear door for a split or strain in the metal adjacent to the latch. If the metal is split or strained then the door assembly must be replaced. The customer may notice the metal adjacent to the latch is split or not smooth to the touch. This indicates the metal near the left rear door latch area is strained or split (Fig. 1).
Associated Products (1)Associated Documents - June 2, 2016•Document ID: 10218257Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL; SEATS
- Mfr Comm. #:
- 23-023-16
- Date Added:
- August 22, 2022
- Manufacturer:
- JEEP
SummaryLeft Rear Door Replacement Due to A Split Or Strain In The Sheet Metal This bulletin involves inspecting the left rear door for a split or strain in the metal adjacent to the latch. If the metal is split or strained then the door assembly must be replaced. The customer may notice the metal adjacent to the latch is split or not smooth to the touch. This indicates the metal near the left rear door latch area is strained or split (Fig. 1).
Associated Products (1)Associated Documents - June 2, 2016•Document ID: 10139943Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR
- Mfr Comm. #:
- 23-023-16
- Date Added:
- June 11, 2018
- Manufacturer:
- JEEP
SummaryLeft Rear Door Replacement Due to A Split Or Strain In The Sheet Metal This bulletin involves inspecting the left rear door for a split or strain in the metal adjacent to the latch. If the metal is split or strained then the door assembly must be replaced. The customer may notice the metal adjacent to the latch is split or not smooth to the touch. This indicates the metal near the left rear door latch area is strained or split (Fig. 1).
Associated Products (1)Associated Documents - June 1, 2016•Document ID: 10219815Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:HEADLIGHTS; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-064-16
- Date Added:
- September 15, 2022
- Manufacturer:
- JEEP
SummaryHeadlamp Leveling Switch Position Not Correct This bulletin involves running the wiTECH function: Configure BUX Headlamp Parameters. Customers may describe that the headlamp leveling switch positions are opposite of the actual headlamp positions (Fig. 1). For example, switch down position is headlamps up and vice versa.
Associated Products (3)Associated Documents