Infiniti Q60 Service Bulletins (2020)
124 manufacturer communications on file.
- November 26, 2019•Document ID: 10168894Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- ITB19-042
- Date Added:
- December 6, 2019
- Manufacturer:
- INFINITI
SummaryINFINITI; AV CONTROL UNIT REPLACEMENT PROCESS IF YOU CONFIRM The AV control unit needs to be replaced on an APPLIED VEHICLE. ACTION 1. Read and save the VIN 2. Read and save the configuration 3. Replace the AV control unit 4. Reprogram the AV control unit 5. Configure the AV control unit 6. Write the VIN to the AV control unit IMPORTANT: Procedures 4-6 above must be performed in the order shown below.
Associated Products (4)Associated Documents - October 16, 2019•Document ID: 10167285Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB19-030
- Date Added:
- November 7, 2019
- Manufacturer:
- INFINITI
SummaryAV CONTROL UNIT INFORMATION SERVICE INFORMATION The applied vehicles listed above are equipped with a NEW AV control unit that controls the display, audio, Bluetooth®, and navigation systems. This new system uses the AV control unit as the main controller for most functions of the display(s), audio, navigation, and Bluetooth® systems. The display unit(s) only provide input and output to the AV control unit.
Associated Products (4)Associated Documents - October 8, 2019•Document ID: 10167284Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB19-029
- Date Added:
- November 7, 2019
- Manufacturer:
- INFINITI
SummaryTELEMATICS (IVC) SERVICE INFORMATION See ITB12-011 for models built before those listed above for a different Service Procedure. SERVICE INFORMATION The Applied Vehicles are equipped with a wireless communication device called a Telematics Communication Unit (TCU). With an active Infiniti InTouch Services⢠the TCU communicates with the Infiniti Data Center to provide various security and convenience services. This bulletin contains important service procedures that must be performed properly in order to set-up and maintain the telematics system for the Applied Vehicles. ï - A table has been provided on the next page that lists the model and year-specific steps required to successfully configure a TCU after it has been replaced. ï - A check OFF sheet has been provided on page 13 to print and check off steps as they are performed. Please staple the completed Check OFF Sheet to the repair order.
Associated Products (4)Associated Documents - September 25, 2019•Document ID: 10165757Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- ITB19-028
- Date Added:
- October 8, 2019
- Manufacturer:
- INFINITI
SummaryQ50 AND Q60 WITH VR30DDTT (V6) ENGINE; ENGINE OIL DRAIN PLUG SERVICE INFORMATION SERVICE INFORMATION Whenever installing an engine oil drain plug on an APPLIED VEHICLE with a VR30DDTT (V6) engine, NEVER tighten the drain plug greater than its specified torque. Over-tightening may loosen the threaded insert in the oil pan (lower), causing an oil leak. ALWAYS replace the drain plug gasket after removing the drain plug, and then tighten the drain plug to the specified torque. ï· VR30DDTT (V6) engine oil drain plug torque (with new gasket): ï 2WD and AWD: 33.5 Nâ¢m (3.4 kg-m, 25 ft-lbs) ï· Avoid contact with the engine oil as it may be hot and cause burns. ï· Avoid prolonged or repeated contact with used engine oil as it may cause skin cancer. Try to avoid direct skin contact with used engine oil. If skin contact is made, wash with a suitable hand cleaner or soap as soon as possible.
Associated Products (8)Associated Documents