Dodge Dakota Recalls (1991)

5 recalls on file.

• Recall06E049000May 24, 2006
  EXTERIOR LIGHTING

  CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

  Remedy

  CK MOTORSPORT WILL NOTIFY OWNERS AND REPLACE THE NONCOMPLIANT LAMPS FREE OF CHARGE. THE RECALL BEGAN ON JULY 1, 2006. OWNERS MAY CONTACT CK MOTORSPORT AT 1-909-610-7211.

• Recall00V106000April 11, 2000
  POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)

  VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS EQUIPPED WITH A500 AUTOMATIC TRANSMISSION. INADVERTENT PLACEMENT OF THE SHIFT LEVER IN REVERSE CAN OCCUR WHEN THE DRIVER BELIEVES THAT THE TRANSMISSION HAS BEEN PLACED IN PARK.

  Remedy

  DEALERS WILL REPLACE THE STEEL MANUAL VALVE IN THE TRANSMISSION WITH AN ALUMINUM VERSION.

• Recall95V089000May 12, 1995
  STEERING: STEERING WHEEL/HANDLE BAR

  THE STEERING WHEEL ARMATURE STAMPING CAN CRACK DUE TO FATIGUE AND SEPARATE FROM THE CENTER HUB ATTACHMENT TO THE STEERING COLUMN.

  Remedy

  DEALERS WILL INSPECT THE STEERING WHEEL FOR ARMATURE CRACKS AND REPLACE ANY WHEELS EXHIBITING CRACKS. ALL OTHER VEHICLES WILL HAVE A REINFORCEMENT PLATE INSTALLED TO PREVENT STEERING WHEEL SEPARATION IF CRACKING OCCURS.

• Recall91V200000November 12, 1991
  SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

  THE RIGHT FRONT BRAKE HOSE MAY RUB AGAINST THE TIRE DURING A FULL LOCK LEFT TURN, WHICH MAY EVENTUALLY CAUSE WEAR THROUGH OF THE BRAKE HOSE ON THE RIGHT FRONT SIDE.

  Remedy

  IF CLEARANCE BETWEEN THE BRAKE HOSE AND TIRE ON THE RIGHT FRONT IS INADEQUATE, REPLACE BRAKE HOSE WITH A MODIFIED VERSION TO ENSURE ADEQUATE CLEARANCE.

• Recall90V176000October 1, 1990
  FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS

  STEEL BRAIDED FUEL HOSE ROUTING MAY ALLOW CONTACT BETWEEN THE HOSE AND TRANSMISSION WIRING HARNESS.

  Remedy

  INSTALL A TIE STRAP TO SECURE THE TRANSMISSION WIRING AWAY FROM THE FUEL HOSE.