BMW X3 Service Bulletins (2015)
305 manufacturer communications on file.
- April 1, 2017•Document ID: 10146633Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B160117
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummarySERVICE ACTION: REPLACE ACTIVATED CHARCOAL FILTER AND NVLD SENSOR HOLDER. What's New: ? Description of the problem and the procedure is clarified. The activated charcoal canister and NVLD sensor holder are damaged. Transportation damage.
Associated Products (10)Associated Documents - April 1, 2017•Document ID: 10146632Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- B130315
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?N20, N26, N55, N63TU, S63TU and S55 Engines: Bosch Injector ETK Part Number Error What's New: ? Identifying the injector type using the ISTA test plan ? Determining the injector part number using the new the parts table. The current version of the ETK incorporates multiple part number errors for the Bosch type injectors. Ordering the injectors by VIN number or manual identification in ETK may result in an incorrect part number.
Associated Products (214)Associated Documents - March 1, 2017•Document ID: 10146604Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- B650617
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?SATELLITE RADIO DETERIORATION IN RECEPTION QUALITY DUE TO NEW CELLULAR FREQUENCIES . INFORMATION Inform the customer that the introduction of these expanded frequencies by the wireless mobile providers may be influencing reception quality. BMW is currently working with the wireless mobile providers in order to improve the quality of reception and help alleviate the issues that are caused by the wireless mobile expanded frequencies. Once we have more information about this situation this service information bulletin will be updated. Currently Satellite Radio is provided by SiriusXM for BMW customers via geosynchronous (GEO) satellites located roughly above the equator. This means that the satellite signal to some parts of the United States can come in at an angle as low as 32 degrees to the horizon. Due to this angle, buildings, hills, trees, highway sound blocking walls or other obstacles might block the satellite signal coming from reaching the vehicle receiver antenna and might cause audio cut outs, unless the wireless provider has installed terrestrial repeaters. Reception quality decreases the further north you travel, as the angle of the incoming signal gets smaller. Also adverse weather conditions might affect reception. At this time, in the event of a customer complaint or inquiry on interference noise: Do not replace any parts Do not program or carry out other work on the vehicle Explain to customer about the new Wireless Communications Service (WCS) signals When investigating Satellite Radio cutouts or a temporary loss of reception: Please compare to a similarly equipped vehicle. Keep in mind the roofline of the vehicle, size of the antenna (sharkfin) and location of the antenna on the vehicle will all affect the strength of the reception. Do not compare a Sport Activity Vehicle (SAV) with a high roofline mounted antenna to a different vehicle such as a coupe or convertible with a much lower mounting point of the antenna. Replace no parts Do not prog
Associated Products (99)Associated Documents - March 1, 2017•Document ID: 10146603Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B650616
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?NBT HEAD UNIT ABORTS IMPORT OF CD Whats New: ? G12 (7 Series) removed ? I01 (i3) removed ? Warranty Section updated for removal of G12 and I01 . While importing a CD to the internal music collection of an NBT head unit the process aborts. You will see 'import error' on the radio display when this occurs. NBT Head Unit software
Associated Products (160)Associated Documents - March 1, 2017•Document ID: 10146597Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B620217
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?Instrument Cluster Failure at Low Ambient Temperature. Sporadically, at low temperatures, the instrument cluster (KOMBI) is not operating (display remains black). KOMBI software.
Associated Products (31)Associated Documents - March 1, 2017•Document ID: 10146574Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B160117
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummarySERVICE ACTION: REPLACE ACTIVATED CHARCOAL FILTER AND NVLD SENSOR HOLDER What's New: ? Procedure, parts and warranty added. The activated charcoal canister and or NVLD sensor holder may be damaged. Transportation damage.
Associated Products (10)Associated Documents - March 1, 2017•Document ID: 10146573Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B130315
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummaryN20, N26, N55, N63TU, S63TU and S55 Engines: Bosch Injector ETK Part Number Error What's New: ? Procedure change: indentifying injector type using an ISTA test plan. . The current version of the ETK incorporates multiple part number errors for the Bosch type injectors. Ordering the injectors by VIN number or manual identification in ETK may result in an incorrect part number.
Associated Products (220)Associated Documents - March 1, 2017•Document ID: 10136361Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- B651312
- Date Added:
- May 7, 2018
- Manufacturer:
- BMW
SummaryHEADUNIT NAVIGATION MAPS (HU-H HU-H2 HU-B): The Headunit High (HU-H), also called NBT, began replacing the Car Information Computer (CIC) on certain MY2013 vehicles with option 609 (7/2012+).
Associated Products (146)Associated Documents - February 1, 2017•Document ID: 10146554Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B620217
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?SeriesOptionDescription F22, F23, F30, F31, F32, F33, F34, F36, F25, F26, F48, 05AR Traffic Jam AssistantX. Sporadically, at low temperatures, the instrument cluster (KOMBI) is not operating (display remains black). KOMBI software.
Associated Products (35)Associated Documents - February 1, 2017•Document ID: 10146544Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HATCHBACK/LIFTGATE
- Mfr Comm. #:
- B512716
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?RATTLE/ POPPING FROM REAR HATCH AREA . There are two related but separate issues (only one may be present at a time) during driving, especially on uneven surfaces: A. Clicking noises or squeaking noises from the area of the rear hatch. Or B. A popping sound coming from the area of the rear hatch. Bump stop height: A. Situation A - settling of the bump stops over time allows vibration, rattle of the hatch. B. Situation B - the bump stops may be adjusted too high, putting torsional stress on the hatch, causing flexing (popping) noises.
Associated Products (17)Associated Documents - February 1, 2017•Document ID: 10146535Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM; ENGINE
- Mfr Comm. #:
- B180310
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary"? NO REGENERATION OF THE DIESEL PARTICULATE FILTER (DPF) This Service Information bulletin supersedes SI B18 03 10 dated November 2010. . The Service Engine Soon lamp is illuminated. The following fault codes may be stored in the DDE: N47T/N57T engine 245700 - Particle filter system: particulate filter highly loaded (Exhaust backpressure high) 245800 - particle filter system - filter is heavily contaminated. (exhaust backpressure is above maximum) M57Y engine 480A Particle filter system - filter is heavily contaminated. (exhaust backpressure is too high) 481A Particle filter system - filter is heavily contaminated. (exhaust backpressure is above maximum) CAUSE 1. Faults with the exhaust system that affect the monitoring of the DPF by the DDE 2. Unfavorable recent driving profile INFORMATIOM During normal driving, there is a continuous regeneration of the diesel particulate filter that takes place at exhaust-gas temperatures between 280 and 350°C (slower oxidation process). The soot particles can only be burned off when the required exhaust-gas temperature has been reached. Under certain driving conditions (i.e., prolonged short trips or an exhaust system which never reaches soot burn-off temperatures), the DPF can become restricted. The DDE will initiate periodic regeneration automatically, at the latest after 600 miles. In vehicles making many short distance journeys, periodic regeneration takes place after only 250-500 miles. The Digital Diesel Electronics control unit evaluates the time for periodic regeneration from the following values: average distance driven average driving speed temperature in the diesel particulate filter values from the exhaust pressure sensor The DDE initiates the regeneration process by decreasing incoming air by the throttle valve, and one or two post injections are executed. This heats the exhaust-gas temperature to approx. 600° C . When the exhaust temp reaches this point: The soot is burned off with the residual oxygen. The
Associated Products (117)Associated Documents - February 1, 2017•Document ID: 10146534Service Bulletin/Repair InstructionsENGINE; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- B180117
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary"? DIESEL PARTICULATE FILTER (DPF) CLEANING . The following performance issues may be noticed by the customer: CC-Message ""Drive faulty"" Engine jerking or a lack of power over the whole engine speed range Malfunction indicator lamp (MIL) is illuminated The following fault codes may be stored in the DDE: N47T/N57T engine Main Faults: 245700 - Particle filter system: particulate filter highly loaded (Exhaust backpressure high) 258300 - Exhaust backpressure sensor, Signal: Signal too high Secondary Faults: 244C00 - Charging pressure control, control deviation: charging pressure too low/positive deviation 25DA00 - Exhaust gas difference pressure sensor particle filter, Signal: short circuit to plus pole M57Y engine Main Faults: 480A particle filter system 481A particle filter system Secondary Faults: 4530 charging pressure control, control deviation 429A charging pressure control low pressure stage, control deviation Clogged DPF."
Associated Products (117)Associated Documents - February 1, 2017•Document ID: 10146533Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; FUEL SYSTEM, GASOLINE:DELIVERY
- Mfr Comm. #:
- B160117
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?DELIVERY STOP: ACTIVATED CHARCOAL FILTER. A Delivery Stop has been issued on the BMW X3 and X4 produced from February 3, 2017 ? February 7, 2017 involving the activated charcoal filter and holding bracket. The filter and the bracket must be inspected for cracks and replaced if necessary. Approximately 333 vehicles affected by this stop are in dealer inventory. Vehicles which are affected will show the campaign as ?Open? when checked either in AIR or ISPA Next. Once the Warranty Vehicle Inquiry system is updated on Saturday, February 25, 2017 it will display the same information. The affected vehicles will be identified with the campaign description: STOP012094 B160117 Activated Charcoal Filter. This bulletin will be updated with repair instructions and warranty information as soon as they become available. For your convenience, a VIN list of affected vehicles is attached.
Associated Products (10)Associated Documents - January 1, 2017•Document ID: 10150979Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; EQUIPMENT
- Mfr Comm. #:
- B621616
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary?VERTICAL LINES IN HEAD-UP DISPLAY. Run diagnostics and if display is found to be damaged, replace Head-Up display.
Associated Products (92)Associated Documents - December 1, 2016•Document ID: 10146795Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B652314
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummaryCENTRAL INFORMATION DISPLAY INTERMITTENTLY FLASHES OFF/ON This Service Information bulletin replaces SI B65 23 14 dated December 2014. Intermittently, the Central Information Display (CID) flashes off/on. Voltage supply error from the Head unit-high (HU-H) to the Central Information Display (CID) when the display brightness is set to 60% or higher
Associated Products (27)Associated Documents - December 1, 2016•Document ID: 10146794Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- B650915
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummarySI B65 09 15 November 2016 Audio, Navigation, Monitors, Alarms,SRS Technical Service NBT Head Unit High (HU-H) Resets Intermittently or Permanently. The Head Unit-High (HU-H) resets intermittently or permanently. 1. The display is inoperative and there is no audio output 2. Automatic system start-up after a couple of seconds Fault Code E1C440 set No Fault Codes set Software error in the Head Unit High (HU-H)
Associated Products (170)Associated Documents - November 1, 2016•Document ID: 10146966Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- B652616
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary"USB DEVICE IS NOT DETECTED BY CHAMP2 HEAD UNIT. Media connected to the USB connector is not recognized by the audio system. Playback of files from the media is not possible. Message displayed on the audio system display: ""Title cannot be reproduced"" ""Is being read"" (but never plays back any audio) CAUSE Media with data files stored in more than 32 directories or 32 subdirectories within a directory. Media with a large number of files. Media exceeds total storage capacity of 32 GB."
Associated Products (179)Associated Documents - November 1, 2016•Document ID: 10146964Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- B651316
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary"NBT-EVO Head Unit Cannot Be Swapped Between Vehicles for Testing This Service Information bulletin supersedes SI B65 13 16 dated July 2016.. If an NBT-EVO head unit is swapped into a different vehicle it will enter a locked mode once it recognizes a different VIN. This will set a fault in the Head Unit (NBT-EVO), Fault Code ""B7F87A: Burgler Actively Registered / Component Protection Active"" This will require REPLACEMENT of the head unit to restore operation. To prevent easy re-use of stolen Head units additional features are introduced with 11/15 ISTA/P software to bring NBT-EVO to a higher security level. In NBT-EVO the mechanism is called ""Trusted VIN"""
Associated Products (78)Associated Documents - November 1, 2016•Document ID: 10146962Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:HEADLIGHTS:CONCEALMENT DEVICES
- Mfr Comm. #:
- B630516
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary"HEADLIGHT ASSEMBLIES HAVE VISIBLE INTERNAL MOISTURE/CONDENSATION. Water on the inside (A) or misting (B) of both headlight lenses that is visible from outside. Water inside the headlights can be caused by two situations: Water/moisture ingress into the headlight housing. Thermal conditions that result in the formation of condensation. Note: An important indication that the moisture issue is caused by ""condensation"" rather than a ""water leak"" into the headlight housing, there will be misting/condensation in ""both headlights."""
Associated Products (156)Associated Documents - November 1, 2016•Document ID: 10146779Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B070314
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummaryDiagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits This Service Information bulletin supersedes SI B07 03 14 dated October 2015.. Fault codes stored in vehicles being serviced are not being diagnosed, leading to repeat repair visits (source- Analysis of FASTA data and repeat repair visit reports). INFORMATION Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) to find their root cause during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
Associated Products (256)Associated Documents