BMW 650i Service Bulletins (2012)
363 manufacturer communications on file.
- October 1, 2012•Document ID: 10150327Service Bulletin/Repair InstructionsVISIBILITY:GLASS, SIDE/REAR
- Mfr Comm. #:
- 512312
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryFront Door Window/Rear Side Window Reverses when Closing. When using the automatic window closing feature, intermittently the rear window automatically reverses. CAUSE Sensitivity of the anti-trap feature
Associated Products (5)Associated Documents - October 1, 2012•Document ID: 10150323Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 310112
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryClicking Noise from Front Axle. Clicking noises are heard from the front axle area while maneuvering at low speeds (e.g., parking lot maneuvers). CAUSE Movement between the contact surfaces of the wheel bearing and swivel bearing (knuckle)
Associated Products (56)Associated Documents - October 1, 2012•Document ID: 10150318Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 130612
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
Summary"N63 and N74 Engine: ISTA/D 2.33 Diagnostic Error in the Low-pressure Fuel Supply Sensor Value. INFORMATION When diagnosing the low-pressure fuel supply sensor with one of the following test plans and ISTA/D 2.33, an error will be encountered in the display. The value of the low-pressure fuel supply sensor will read 0 bar at all times. * B1214_DI6KNDR * D18KHDR * AT1214_DIKNDR * AT1214_DIKHDR Do not replace the low-pressure fuel supply sensor. The operating pressure of the low-pressure fuel supply sensor can found in ""DME Diagnostic Query"" using the following procedure: 1. Exit the test plan and return to the control unit tree. http://www.bmwtis.net/tiscode/cgi-bin/omcgi.exe?sie_path=/tsb/bulletins/htm_store/14907...11/7/2012 Page 2 of 2 2. Select ""DME"" in the control unit tree. 3. Select "" Call Up ECU Functions."" 4. Select ""Diagnostic Query."" 5. Select ""Fuel Pressure (Low Pressure)."" 6. Select ""Query Status."" The engine must be running to verify operation of the pressure sensor. The software error will be corrected in ISTA/D 2.34, scheduled for release in December 2012. "
Associated Products (56)Associated Documents