Bentley Flying Spur Service Bulletins (2021)
714 manufacturer communications on file.
- September 10, 2021•Document ID: 10201971Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 2060432/3
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryNew Continental GT / GTC and New Flying Spur - Exhaust Flap - Diagnostic Trouble Code Customer statement / workshop findings: Warning lamp illuminated on Driver Instrument Panel (DIP) âÂÂDrive system fault. Contact your Bentley dealer displayed on DIP. One or more of the following Diagnostic Trouble Codes (DTCs) stored within Engine Control Modules (ECMs) 1 or 2 (Depending on model type) P04A000: Exhaust Pressure Control Valve P04A000 / P047500: Exhaust Pressure Control Valve A P14AB00: Exhaust door control unit mechanical malfunction P049F00: Exhaust Pressure Control Valve "B
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201964Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2059246/3
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryBuzzing/vibration from the left and/or right headlamp and/or DTC's C119C01-C119D01 stored - Matrix beam headlamp only Customer statement: Buzzing noise may be evident from the left and/or right headlamp Workshop findings The following DTCs may also be evident in 00D6 Light control left 2 (Matrix beam) and/or 00D7 Light control right 2 (Matrix beam) C119C01 Fan for headlamp electrical error C119D01 Fan 2 for headlamp electrical error Technical background: Wiring harness routed incorrectly within the headlamp module at the rear of the headlamp, the noise and DTCs are evident due to the harness contacting the headlamp cooling fan
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201962Service Bulletin/Repair InstructionsEQUIPMENT; FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2058516/3
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryTicking noise from the rear cabin area Customer statement / workshop findings: Ticking noise can be heard from inside the rear of the cabin when sitting in the rear seats Technical background: The noise can be heard when the engine is at operating temperature, after a drive cycle or an extended idle period, the noise is most evident with the armrest lowered with all electrical consumers switched off. The ticking noise occurs when the purge system is in operation, the vibrations emitted from the purge valve are then amplified through the fuel pipes to the rear of the vehicle. This is normal operation and no further investigation work is required as the vehicle is operating to specification.
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201960Service Bulletin/Repair InstructionsSEAT BELTS
- Mfr Comm. #:
- 2058411/4
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummarySeat belt buckle stop button - Missing Customer statement / workshop findings: Seat belt buckle stop button missing Measure: Replace the affected seatbelt assembly
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201958Service Bulletin/Repair InstructionsSTRUCTURE; EQUIPMENT
- Mfr Comm. #:
- 2058354/4
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryNew Flying Spur - Flying "B" Mascot Customer statement / workshop findings: This Technical Product Information (TPI) Document is designed to give repair guidance and standardised fault reporting for Flying B functionality, poor finish and damage concerns.
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201939Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STEERING
- Mfr Comm. #:
- 2058837/3
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryDTC's C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500) Customer statement / workshop findings: DTC's C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500) Diagnostic address 44 Referring to Figure 1 Check and confirm the Software version number is 2110 - Should the Software version number be at 2110 the operative should conduct Section 1 of this TPI - Should the Software version number be one of the versions shown below, the operative should conduct Section 2 of this TPI
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201936Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE
- Mfr Comm. #:
- 2063953/2
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryACC Unavailable - Warning within the DIP - Numerous DTC's within address 003 Customer statement: ACC Unavailable - Warning within the DIP Workshop findings: One or a combination of the following DTCs and symptom codes are evident within address 003 - P191F00 â 4538626 - Pressure sensor for brake booster Electrical malfunction (Front Right Corner Pressure Sensor Fault) - C054100 â 4538624 - Brake Pressure Sensor "B" Range/Performance (Rear left Pressure Sensor Fault) - C054200 â 4538880 - Brake Pressure Sensor "B" Circuit Low (Rear left Pressure Sensor Fault)
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201934Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2063777/2
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryDTC's C119813 Low beam light bulb open circuit or C1198FA Low beam light bulb short circuit evident in D6 and/or D7 Customer statement: Headlamp low beam not functioning and/or warning within the DIP Workshop findings: DTCs C119813 Low beam light bulb open circuit active/static and/or C1198FA Low beam light bulb short circuit active/static logged within diagnostic address D6 (light control left) and/or D7 (light control right)
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201929Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2063954/3
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryEngine warning light illuminated within the DIP during acceleration - DTC P029900 evident - W12 TSI only Customer statement: Engine warning light and max engine speed 4000 rpm warning evident within the DIP during acceleration - Warning on DIP first appears when accelerating (During boost) Workshop findings: DTC P029900 evident within the engine control unit/s In the event the afore mentioned symptoms are evident the operative should refer to the onward instructions
Associated Products (4)Associated Documents - September 10, 2021•Document ID: 10201928Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2063729/2
- Date Added:
- October 5, 2021
- Manufacturer:
- BENTLEY
SummaryFitment of control modules from donor vehicles for test purposes Technical background: If an issue is suspected for one of the control modules listed below: - Onboard supply control unit (J519) - Convenience system central control unit (J393) - Data bus diagnostics interface (J533) - Control unit 1 for Information Electronics (J794) - Control unit in dash panel insert (J285) - Emergency call module control unit (J949) The fitment of donor parts from another vehicle is not advisable and only possible if approved from Product Support via an open DISS query.
Associated Products (4)Associated Documents - September 10, 2021•Document ID: 10201927Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2063410/2
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryInfotainment Main unit (5F / J794) fault finding/diagnosis procedure Customer statement / workshop findings: Issue suspected with the Infotainment Main unit (5F / J794) - For example: -MMI screen image flickers or goes blank - No response to selection - Audio cuts-out Technical background: Refer to the Measure section regarding any Infotainment Main unit (5F / J794) fault finding/diagnosis
Associated Products (4)Associated Documents - September 10, 2021•Document ID: 10201926Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2063354/2
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryV8 Kovomo - Whining noise - Front of the engine at idle speed Customer statement: Erratic whining noises from the front of the engine at idle speed. Workshop findings: The irregular knocking noises can be assigned to the front of the engine. There are no further complaints (such as poor engine or engine cooling system performance, event entries, etc.)
Associated Products (4)Associated Documents - September 10, 2021•Document ID: 10201925Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2061537/3
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryInfotainment home screen - Loading messages visible on start up in multiple tiles. Customer statement / workshop findings: Upon start-up of the Home screen, loading messages can be seen in some or all of the tiles. Technical background A delay when loading tiles is normal, this is due to the amount of external data that is required to load each individual tile, including multiple pages of external data that can be associated with each individual tile. Some tiles will naturally take longer to load than others. For example, APPS, NAVIGATION and MEDIA are likely to have a greater delay in loading than other tiles this is due to the amount of external data required to display the relevant information. TIP: If required, the delay can be reduced by only selecting tiles that do not communicate with external data sources, for example CAR or CLIMATE functions. A technical DISS query should be raised by the retailer to highlight the issue described is evident.
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201924Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2061566/3
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryCustomer statement / workshop findings: VERY IMPORTANT: This TPI is only applicable to vehicles which have the following issues found during the Pre Delivery Inspection (PDI). Unable to complete set-up of Connected Services at PDI and/or the SOS LED in roof console is either lit red or flashing red and/or the test call is unable to complete.
Associated Products (4)Associated Documents - September 10, 2021•Document ID: 10201923Service Bulletin/Repair InstructionsVISIBILITY; STRUCTURE
- Mfr Comm. #:
- 2057841/3
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryWindscreen replacement criteria whilst under manufacturers warranty Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged NOTE: The instructions MUST be followed to help the retailer clarify if the windscreen should be replaced under manufacturers warranty (Stress crack) or Customer pay/insurance (external influence damage)
Associated Products (4)Associated Documents - September 10, 2021•Document ID: 10201920Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2056105/3
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryEmergency call function test at PDI The instruction to test the Emergency call function at PDI will be integrated within the PDI procedure All Emergency call function operating instructions can be found within the Owners handbook (Making an Emergency call)
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201919Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2055846/5
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryInfotainment screen turns red sporadically A technical DISS query should be raised by the retailer to highlight the issue described is evident
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201916Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2061757/2
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryCustomer statement: Night vision warning lamp is evident with the Drivers Information Panel (DIP). Workshop findings: DTC - B2000F2: Faulty control module (Symptom code 4102) evident within address 0084 Night vision control module. Technical background: IMPORTANT: In the event that the issue is evident and the vehicle is post the VINs shown below, a DISS query must be raised ensuring the following is attached to the query. -Detailed description in which the issue occurred, for example -Driving on a quiet road with no traffic, conditions were wet, the road had no street lighting. -Clear photographs showing the condition of the night vision camera and night vision camera lens. -Current and up to date ODIS log. However, should the vehicle be prior to the VIN cut off, the operative MUST carry out the instructions within the Measure section of this TPI. New Flying Spur New Continental GT and New Continental GTC (all vehicles from SCBCD13S1KC071068 are to specification). Bentayga (all vehicles from SJAAL14V0KC025622 are to specification).
Associated Products (4)Associated Documents - September 10, 2021•Document ID: 10201915Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2055772/4
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryBattery conditioner inoperative Corrosion on the contact surfaces of the charger socket and charger lead. If the charging socket or charger lead are wet when the charger is connected this can cause corrosion on the contacts. Check for corrosion on the contact surfaces of both the charger socket and charger lead.
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201914Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2055580/6
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryRotating Display - Fault Diagnosis Customer statement / workshop findings: Various rotating display operational complaints or noises. Follow the measure section of this TPI that relates to your customer complaint.
Associated Products (2)Associated Documents