Toyota Tundra Service Bulletins (2008)
280 manufacturer communications on file.
- June 25, 2018•Document ID: 10145990Service Bulletin/Repair InstructionsSTRUCTURE; EQUIPMENT
- Mfr Comm. #:
- H0F-Dealer Packa
- Date Added:
- October 22, 2018
- Manufacturer:
- TOYOTA
SummaryDealer Package: June 25, 2018 Added warranty claim submission flowchart. See Appendix A. Toyota will initiate a Limited Service Campaign (LSC H0F) to apply Corrosion Resistant Compound to key areas of the vehicle?s frame for the following vehicles located in the 20 Cold Climate States1: ? Certain 2005 to 2010 Tacoma** - Available ? 2007 to 2008 Tundra ? Available ? 2005 to 2008 Sequoia ? Available On May 21, 2017, a settlement of claims in a class action lawsuit regarding frame corrosion was finally approved. This finally approved class action settlement includes inspection of the customer?s frame, and if the frame meets or exceeds the Rust Perforation Standard based on the Court-ordered inspection criteria, the frame will be replaced at no cost to the customer.
Associated Products (12)Associated Documents - June 25, 2018•Document ID: 10145988Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- Frame Campaign W
- Date Added:
- October 22, 2018
- Manufacturer:
- TOYOTA
SummaryDealer Daily Message: Frame Warranty Claim Submission The information below should be referenced to ensure correct warranty claim submissions for frame replacement or spray campaigns (ZH6-9 and H0F). Key Points ? DO NOT perform Campaign H0F without first performing and filing a claim for the WEP (Warranty Enhancement Programs ZH6-9) inspection. ? H0F Op Codes GGG44C, GGG45C, GGG46C, GGG47C, and GGG48C are for vehicles that had initially passed the WEP inspection, but had perforation found when descaling the vehicle in preparation for the CRC spray. These H0F Op codes are not to be used as a preliminary failed inspection. ? If you see in TIS that campaign H0F is applicable and the status shows Not Completed, check to see the status of WEP ZH6-9. Please follow the flowchart below for the correct frame inspection, replacement, and CRC spray process.
Associated Products (12)Associated Documents - June 20, 2018•Document ID: 10142896Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR
- Mfr Comm. #:
- ZH3_Toyota POL17
- Date Added:
- July 16, 2018
- Manufacturer:
- TOYOTA
SummaryWarranty Policy Bulletin: Toyota has received a number of reports regarding the outside door handles on certain 2008-2015 model year Sequoia vehicles and on certain 2007-2015 model year Tundra vehicles. In these reports, customers have indicated that one or more of the outside door handles exhibited an abnormal feeling, dragging, or sticking when used.
Associated Products (17)2015 Toyota Sequoia2015 Toyota Tundra2014 Toyota Sequoia2014 Toyota Tundra2013 Toyota Sequoia2013 Toyota Tundra2012 Toyota Sequoia2012 Toyota Tundra2011 Toyota Sequoia2011 Toyota Tundra2010 Toyota Sequoia2010 Toyota Tundra2009 Toyota Sequoia2009 Toyota Tundra2008 Toyota Sequoia2008 Toyota Tundra2007 Toyota TundraAssociated Documents - June 14, 2018•Document ID: 10142883Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- Toyota PRO18-03_
- Date Added:
- July 16, 2018
- Manufacturer:
- TOYOTA
SummaryMis-Built For frames that are suspected to have been mis-built, dealers should: 1. Contact the Parts Technical Support Group (PTSG) at [email protected] with information on the condition and status of repair. a. Include the original part order reference number. 2. A Field Product Quality Report (FPQR) should be generated and attached to the communication. a. The report should include photos of the condition and of all labels and stampings on the frame. b. This report can be submitted by region staff (FTS) or dealership personnel. 3. Dealership will receive communication back with next direction(s) from PTSG. a. Response will include confirmation of mis-built condition and if applicable,
Associated Products (20)2010 Toyota Tacoma2009 Toyota Tacoma2008 Toyota Sequoia2008 Toyota Tacoma2008 Toyota Tundra2007 Toyota Sequoia2007 Toyota Tacoma2007 Toyota Tundra2006 Toyota Sequoia2006 Toyota Tacoma2005 Toyota Sequoia2005 Toyota Tacoma2004 Toyota Tacoma2003 Toyota Tacoma2003 Toyota Tundra2002 Toyota Tacoma2002 Toyota Tundra2001 Toyota Tacoma2001 Toyota Tundra2000 Toyota TundraAssociated Documents - May 25, 2018•Document ID: 10141611Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- ZH6, ZH7, ZH8, Z
- Date Added:
- June 18, 2018
- Manufacturer:
- TOYOTA
SummaryDealer Daily Message: Frame Programs. Extension of Warranty Coverage for Frame Corrosion/Frame Replacement. Frame Ordering/Repair/Administration Updates Mis-Built. For frames that are suspected to have been mis-built, dealers should: 1. Contact the Parts Technical Support Group (PTSG) at [email protected] with information on the condition and status of repair. Also include the original part order reference number. a. A Field Product Quality Report (FPQR) should also be generated and attached to the communication. i. The report should include photos of the condition, and photos of all labels and stampings on the frame. ii. This report can be submitted by region staff (FTS) or dealership personnel. 2. Dealership will receive communication back with next direction(s) from PTSG. a. Response will include confirmation of mis-built condition, if applicable, and instructions on mis-built frame disposition.
Associated Products (20)2010 Toyota Tacoma2009 Toyota Tacoma2008 Toyota Sequoia2008 Toyota Tacoma2008 Toyota Tundra2007 Toyota Sequoia2007 Toyota Tacoma2007 Toyota Tundra2006 Toyota Sequoia2006 Toyota Tacoma2005 Toyota Sequoia2005 Toyota Tacoma2004 Toyota Tacoma2003 Toyota Tacoma2003 Toyota Tundra2002 Toyota Tacoma2002 Toyota Tundra2001 Toyota Tacoma2001 Toyota Tundra2000 Toyota TundraAssociated Documents - May 18, 2018•Document ID: 10141596Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR
- Mfr Comm. #:
- T-SB-0161-16_Rev
- Date Added:
- June 18, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: REVISION NOTICE May 18, 2018 Rev1: * Applicability has been updated to include 2018 model year Tundra and 2017 - 2018 model year Sequoia vehicles. * The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. Some 2008 - 2018 model year Sequoia and 2007 - 2018 model year Tundra vehicles may exhibit a popping noise during RH or LH front door operation. This noise may be due to a fracture/crack in the plastic over mold of the door check arm by the pivot area. Follow the Repair Procedure in this bulletin to address this condition. NOTE If the vehicle is being repaired due to damage from an accident, this Service Bulletin and the part numbers listed do NOT apply.
Associated Products (23)2018 Toyota Sequoia2018 Toyota Tundra2017 Toyota Sequoia2017 Toyota Tundra2016 Toyota Sequoia2016 Toyota Tundra2015 Toyota Sequoia2015 Toyota Tundra2014 Toyota Sequoia2014 Toyota Tundra2013 Toyota Sequoia2013 Toyota Tundra2012 Toyota Sequoia2012 Toyota Tundra2011 Toyota Sequoia2011 Toyota Tundra2010 Toyota Sequoia2010 Toyota Tundra2009 Toyota Sequoia2009 Toyota Tundra+ 3 moreAssociated Documents - March 2, 2018•Document ID: 10133635Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- ZH7_Toyota POL17
- Date Added:
- April 23, 2018
- Manufacturer:
- TOYOTA
SummaryWarranty Policy Bulletin: Toyota has received reports of customer concerns in which the vehicles operated in specific cold climate areas (Cold Climate States) with high road salt usage may exhibit more-than-normal corrosion with the vehicle?s frame. On May 21, 2017, a settlement of claims in a class action lawsuit involving 2007 ? 2008 Toyota Tundra vehicles regarding frame corrosion was approved. This class action settlement includes inspection of the customer?s frame, and if the frames meet or exceed the Rust Perforation Standard based on the Court-ordered inspection criteria, the frame will be replaced at no cost to the customer. Toyota is currently preparing parts for frame replacement. This settlement will also include CRC (Corrosion Resistant Compound) application. Toyota is currently preparing parts for CRC application process. Once available, CRC application will be covered under a separate Limited Service Campaign (LSC), and will only be available for vehicles registered in the Cold Climate States1 that pass frame inspection criteria, and did not: ? Previously have the frame replaced and/or: ? Previously had the frame sprayed with CRC under any previous campaign
Associated Products (2)Associated Documents - March 2, 2018•Document ID: 10133634Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- ZH7_Dealer Packe
- Date Added:
- April 23, 2018
- Manufacturer:
- TOYOTA
SummaryDealer Letter: March 2, 2018. Rental sublet period added for use during repair. ? Primary Coverage expiration date changed. ? Ancillary parts coverage section added. Warranty Enhancement Program ZH7 Certain 2007 ? 2008 Model Year Tundra Extension of Warranty Coverage for Frame Corrosion. In our continuing efforts to ensure the best in customer satisfaction, Toyota is announcing a Warranty Enhancement Program to extend the warranty coverage for Frame Corrosion on certain 2007 ? 2008 model year Tundra vehicles. On May 21, 2017, a settlement of claims in a class action lawsuit involving 2007 ? 2008 Toyota Tundra vehicles regarding frame corrosion was approved. This finally approved class action settlement includes inspection of the customer?s frame, and if the frames meet or exceed the Rust Perforation Standard based on the Court-ordered inspection criteria, the frame will be replaced at no cost to the customer. Toyota is currently preparing parts for frame replacement. This settlement will also include CRC (Corrosion Resistant Compound) application. Toyota is currently preparing parts for CRC application process. Once available, CRC application will be covered under a separate Limited Service Campaign (LSC), and will only be available for vehicles registered in the Cold Climate States1 that pass frame inspection criteria.
Associated Products (2)Associated Documents - February 12, 2018•Document ID: 10131759Service Bulletin/Repair InstructionsTIRES
- Mfr Comm. #:
- T-SB-0187-12_Rev
- Date Added:
- April 2, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: REVISION NOTICE February 12, 2018 Rev2: ? Applicability has been updated to include 2015 ? 2018 model year vehicles. January 23, 2014 Rev1: ? Applicability has been updated to include 2013 ? 2014 model year vehicles. Any previous printed versions of this bulletin should be discarded. Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles at speeds less than 55 mph with little or no damage to the tire. The U.S. Tire Manufacturers Association (UTSMA) provides guidelines and recommendations for tire repair and replacement. It also provides information related to: ? Basic tire information ? Tire maintenance and safety ? Driver education, tire safety curriculum.
Associated Products (246)2018 Toyota 4Runner2018 Toyota Avalon2018 Toyota Camry2018 Toyota C-HR2018 Toyota Highlander2018 Toyota Mirai2018 Toyota Prius2018 Toyota Prius C2018 Toyota Prius V2018 Toyota RAV42018 Toyota Sequoia2018 Toyota Sienna2018 Toyota Tacoma2018 Toyota Tundra2018 Toyota Yaris2017 Toyota 4Runner2017 Toyota 862017 Toyota Avalon2017 Toyota Camry2017 Toyota C-HR+ 226 moreAssociated Documents - February 12, 2018•Document ID: 10129977Service Bulletin/Repair InstructionsTIRES
- Mfr Comm. #:
- T-SB-0187-12_Rev
- Date Added:
- March 12, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: REVISION NOTICE February 12, 2018 Rev2: ? Applicability has been updated to include 2015 ? 2018 model year vehicles. January 23, 2014 Rev1: ? Applicability has been updated to include 2013 ? 2014 model year vehicles. Any previous printed versions of this bulletin should be discarded. Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles at speeds less than 55 mph with little or no damage to the tire. The U.S. Tire Manufacturers Association (UTSMA) provides guidelines and recommendations for tire repair and replacement. It also provides information related to: ? Basic tire information ? Tire maintenance and safety ? Driver education, tire safety curriculum.
Associated Products (244)2018 Toyota 4Runner2018 Toyota Avalon2018 Toyota Camry2018 Toyota C-HR2018 Toyota Highlander2018 Toyota Mirai2018 Toyota Prius2018 Toyota Prius C2018 Toyota RAV42018 Toyota Sequoia2018 Toyota Sienna2018 Toyota Tacoma2018 Toyota Tundra2017 Toyota 4Runner2017 Toyota 862017 Toyota Avalon2017 Toyota Camry2017 Toyota C-HR2017 Toyota Corolla2017 Toyota COROLLA iM+ 224 moreAssociated Documents - January 25, 2018•Document ID: 10129223Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; STRUCTURE; EQUIPMENT
- Mfr Comm. #:
- ZH7_TI_01.25.18
- Date Added:
- February 21, 2018
- Manufacturer:
- TOYOTA
SummaryTechnical Instructions: TECHNICAL INSTRUCTIONS FOR WARRANTY ENHANCEMENT PROGRAM ZH7. CERTAIN 2007-2008 MODEL YEAR TUNDRA. FRAME REPLACEMENT. Update 1.25.18 - Added Additional Frame Serial Number Tracker Information.
Associated Products (2)Associated Documents - January 11, 2018•Document ID: 10131713Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- T-SB-0304-17_Rev
- Date Added:
- April 2, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. REVISION NOTICE January 11, 2018 ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
Associated Products (492)2018 Toyota 4Runner2018 Toyota 862018 Toyota Avalon2018 Toyota Camry2018 Toyota C-HR2018 Toyota Corolla2018 Toyota Highlander2018 Toyota Mirai2018 Toyota Prius2018 Toyota Prius C2018 Toyota Prius V2018 Toyota RAV42018 Toyota Sequoia2018 Toyota Sienna2018 Toyota Tacoma2018 Toyota Tundra2018 Toyota Yaris2017 Toyota 4Runner2017 Toyota 862017 Toyota Avalon+ 472 moreAssociated Documents - December 21, 2017•Document ID: 10127064Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- ZH7_Tundra Frame
- Date Added:
- January 16, 2018
- Manufacturer:
- TOYOTA
SummaryTechnical Instructions: Warranty Enhancement Program ZH7. Certain 2007-2008 Model Year Tundra. Frame Replacement. Update 12.21.17. - Updated Frame Serial Number Tracker Information.
Associated Products (2)Associated Documents - December 14, 2017•Document ID: 10146495Service Bulletin/Repair InstructionsSTRUCTURE:FRAME AND MEMBERS
- Mfr Comm. #:
- HOF Dealer Lette
- Date Added:
- November 5, 2018
- Manufacturer:
- TOYOTA
SummaryDealer Letter: December 14, 2017. Technician Certification Requirements updated. Instructions added for CRC Spray Gun/Parts replacement requests.
Associated Products (12)Associated Documents - December 14, 2017•Document ID: 10140603Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- H0F Dealer Lette
- Date Added:
- June 11, 2018
- Manufacturer:
- TOYOTA
SummaryDealer Letter: December 14, 2017. ? Technician Certification Requirements updated. ? Instructions added for CRC Spray Gun/Parts replacement requests.
Associated Products (12)Associated Documents - December 12, 2017•Document ID: 10197494Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- TSR-1212-17
- Date Added:
- June 14, 2021
- Manufacturer:
- TOYOTA
SummaryTechnician Certification Requirements.
Associated Products (96)2018 Toyota Camry2018 Toyota C-HR2017 Toyota Camry2017 Toyota Mirai2017 Toyota Prius2017 Toyota Sienna2017 Toyota Tacoma2017 Toyota Tundra2017 Toyota Yaris2016 Toyota Avalon2016 Toyota Camry2016 Toyota FJ Cruiser2016 Toyota Highlander2016 Toyota Land Cruiser2016 Toyota Prius2016 Toyota Prius C2016 Toyota RAV42016 Toyota Sienna2016 Toyota Tacoma2016 Toyota Tundra+ 76 moreAssociated Documents - December 8, 2017•Document ID: 10146488Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- Tundra CRC Techn
- Date Added:
- November 5, 2018
- Manufacturer:
- TOYOTA
SummaryTechnical Instructions: Limited Service Campaign H0F Certain 2007-2008 Model Year Tundra CORROSION-RESISTANT COMPOUND APPLICATION.
Associated Products (2)Associated Documents - December 8, 2017•Document ID: 10140593Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- Tundra CRC Techn
- Date Added:
- June 11, 2018
- Manufacturer:
- TOYOTA
SummaryTechnical Instructions: Limited Service Campaign H0F. Certain 2007- 2008 Model Year Tundra. CORROSION-RESISTANT COMPOUND APPLICATION.
Associated Products (2)Associated Documents - November 22, 2017•Document ID: 10133654Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- T-SB-0229-12_Rev
- Date Added:
- April 23, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Toyota vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.
Associated Products (321)2018 Toyota 4Runner2018 Toyota 862018 Toyota Avalon2018 Toyota Camry2018 Toyota C-HR2018 Toyota Corolla2018 Toyota Highlander2018 Toyota Mirai2018 Toyota Prius2018 Toyota Prius C2018 Toyota Prius V2018 Toyota RAV42018 Toyota Sequoia2018 Toyota Sienna2018 Toyota Tacoma2018 Toyota Tundra2018 Toyota Yaris2017 Toyota 4Runner2017 Toyota 862017 Toyota Avalon+ 301 moreAssociated Documents - November 21, 2017•Document ID: 10133649Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- T-SB-0144-08_Obs
- Date Added:
- April 23, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: OBSOLETE NOTICE November 21, 2017: This bulletin is now obsolete. Please see T-SB-0304-17.
Associated Products (277)2009 Toyota 4Runner2009 Toyota Avalon2009 Toyota Camry2009 Toyota Camry Solara2009 Toyota Corolla2009 Toyota FJ Cruiser2009 Toyota Highlander2009 Toyota Land Cruiser2009 Toyota Prius2009 Toyota Sequoia2009 Toyota Sienna2009 Toyota Tacoma2009 Toyota Tundra2009 Toyota Venza2009 Toyota Yaris2008 Toyota 4Runner2008 Toyota Avalon2008 Toyota Camry2008 Toyota Camry Solara2008 Toyota Corolla+ 257 moreAssociated Documents