MINI Cooper Service Bulletins (2014)
462 manufacturer communications on file.
- February 1, 2015•Document ID: 10147111Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- M250214
- Date Added:
- November 5, 2018
- Manufacturer:
- MINI
Summary"eAutomatic Transmission Selector Lever Will Not Move Out of Park. The transmission selector lever cannot be disengaged from the ""P"" position. This can occur very randomly and is difficult to reproduce. No faults are stored in the EGS control unit, and no warnings are displayed in the instrument cluster. For the most part, if the vehicle is locked and goes to sleep (the light in the hazard switch goes out), the problem is no longer present. Unfavorable EGS software"
Associated Products (4)Associated Documents - February 1, 2015•Document ID: 10147110Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- M121614
- Date Added:
- November 5, 2018
- Manufacturer:
- MINI
SummaryWhen Warm, Engine Fails to Start with Valvetronic Fault 135608 Stored. The engine cannot be started once it is already warm. The Valvetronic (VVT) is fixed at a minimum lift position. The following fault is stored in the DME memory: ? 135608 - Valvetronic: No movement identified Under investigation: possibly caused by a DME software error
Associated Products (3)Associated Documents - February 1, 2015•Document ID: 10147109Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- M110215
- Date Added:
- November 5, 2018
- Manufacturer:
- MINI
SummaryB38 and B48 Engines: Rough Running and Various Faults for Camshaft Sensor Signal and VANOS Control Stored in the DME. The engine runs rough and the malfunction warning is illuminated. One or more of the following faults are stored in the DME: 130F11 Camshaft output sensor, plausibility: Implausible signal 130E11 Camshaft input sensor, plausibility: Implausible signal 130E20 Intake camshaft: Angle offset with respect to the crankshaft lies outside tolerance range 130108 VANOS, intake: Control fault, position not reached 130104 VANOS, intake: Control fault, camshaft jamming 131501 VANOS, intake, starting the engine from cold: Cannot be controlled 131908 VANOS, intake, starting the engine from cold: Position not reached CAUSE DME software error and/or a mechanical failure of the intake VANOS actuator and intake VANOS central valve
Associated Products (4)Associated Documents - February 1, 2015•Document ID: 10147108Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- M110112
- Date Added:
- November 5, 2018
- Manufacturer:
- MINI
SummarySI M11 01 12February 2015 EngineTechnical Service This Service Information bulletin supersedes SI M11 01 12 dated March 2014. designates changes to this revision SUBJECT N16 and N18 Engine: Engine Oil Leak. The customer states that a small engine oil leak can be seen from the underside of the engine. CAUSE The internal sealing of the oil pump volume control solenoid valve is compromised, allowing engine oil to leak from the oil pump volume control solenoid. DIAGNOSTIC
Associated Products (17)2016 MINI Countryman2015 MINI Cooper2014 MINI Clubman2014 MINI Cooper2013 MINI Clubman2013 MINI Cooper2013 MINI Cooper Coupe2013 MINI Cooper Roadster2012 MINI Cooper2012 MINI Cooper Coupe2012 MINI Cooper Roadster2011 MINI Cooper2010 MINI Cooper2009 MINI Cooper2009 MINI Cooper Convertible2008 MINI Cooper2007 MINI CooperAssociated Documents - January 1, 2015•Document ID: 10147644Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- M840214
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
Summary"This Service Information bulletin supersedes SI M84 02 14 dated December 2014. PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES BEFORE CUSTOMER DELIVERY OR THE NEXT TIME THEY ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS. designates changes to this revision SUBJECT Service Action: Bluetooth Software (KISU Data) Update. This Service Action is being released to improve customer satisfaction as we strive to be number 1 in the JD Power Initial Quality Survey (IQS). This new KISU software improves the Bluetooth functionality in our vehicles, and it helps to keep us up-to-date with technology innovation. Please implement the Bluetooth Software Update Service Action. This Service Action will be in effect until March 2015. Thank you for your continuous support. Improved KISU data (Customer Initiated Software Update) is now available for installation in these vehicles via the USB port. Improved functionality for COMBOX: z Detailed view of the text messages z Android device connection stability (linked contacts causing BT disconnection) Improved functionality for HU-H: z Reconnection strategy z 3rd Party App Metadata - Album art and song title Note: This Service Action is to be completed only at the dealer. You (dealers) will be receiving vehicles from the VDCs that will require this Service Action to be completed prior to customer delivery. AFFECTED VEHICLES This Service Action involves certain R5x, R6x equipped with COMBOX (CMedia), and F56 vehicles equipped with HU-H (option code 7L5). First check if a Service Action label with a code number 75 is already attached to the B-pillar. If code number 75 has been punched out, the campaign has already been performed, no further action is required. For the affected vehicles, the DCSnet Warranty Vehicle Inquiry ""Vehicle Comment"" and/or the Key Reader/ISPA Light application's ""Comments Information on"" tab has been updated to display the following message: Service Action SI M84 02 14: Bluetooth So
Associated Products (17)2016 MINI Cooper2016 MINI Cooper Convertible2016 MINI Countryman2015 MINI Cooper2014 MINI Cooper2013 MINI Clubman2013 MINI Cooper2013 MINI Cooper Coupe2013 MINI Cooper Roadster2012 MINI Cooper2012 MINI Cooper Coupe2012 MINI Cooper Roadster2011 MINI Cooper2010 MINI Cooper2009 MINI Cooper2009 MINI Cooper Convertible2008 MINI CooperAssociated Documents - January 1, 2015•Document ID: 10147643Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; EQUIPMENT
- Mfr Comm. #:
- M840115
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
Summary"SUBJECT iPhone and iOS 8.x Information. INFORMATION With the release of iOS 8.0, please be aware of the important functional change noted below: Scenario: z The customer leaves the vehicle and turns the phone off. z He or she turns the phone back on. z The customer then enters the vehicle, but does not unlock the phone prior to turning the vehicle on. https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/20701.1.M840115....3/2/2015 Page 2 of 2 Result: z The phone reconnects to the Bluetooth system (normal). z However, the contact list is not transferred (not normal). z The contact list in the iDrive will be empty. z The call list in the Kombi will display only phone numbers, but no names. z The hands-free system works for accepting calls and conversing on calls started on the phone. Solution: z Prior to the customer entering the vehicle, he or she must unlock the phone at least once (passkey). With the release of Apple's new iPhone 6, 6 Plus and iOS 8.x software, there have been many questions regarding the new phone and software. The information in the attachment to this Service Information will help answer these questions. A printed copy can be given to the customer if needed. The attachment provides information on the differences between the new iPhone 6, 6 Plus and the previous versions, along with Apple software improvements in the following areas: 1. Visual comparison 2. Connectivity 3. Functionality Refer to the PDF file in the ""Attachment"" section of this bulletin for complete details. Information on the iPhone 6 is also available via the following website: www.miniusa.com/bluetooth NOTE: This SI will be updated as new information is received. "
Associated Products (18)2016 MINI Cooper2016 MINI Cooper Convertible2016 MINI Countryman2015 MINI Cooper2014 MINI Cooper2013 MINI Clubman2013 MINI Cooper2013 MINI Cooper Coupe2013 MINI Cooper Roadster2012 MINI Cooper2012 MINI Cooper Coupe2012 MINI Cooper Roadster2011 MINI Cooper2010 MINI Cooper2009 MINI Cooper2009 MINI Cooper Convertible2008 MINI Cooper2007 MINI CooperAssociated Documents - January 1, 2015•Document ID: 10147642Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- M340113
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
Summary"SI M34 01 13January 2015 BrakesTechnical Service This Service Information bulletin supersedes SI 34 01 13 dated May 2014. designates changes to this revision SUBJECT Erroneous ""Service due"" Message Although Brake Lining Thickness is Above Minimum Specification. The yellow ""Service Due"" warning message lights up in the instrument cluster, even though the brake pad thickness is more than 4.2mm (above the thickness at which the pad sensor intervenes). The calculated remaining service life for the brake pads (front and/or rear axle) from the CBS data does not match the actual brake pad thickness. Software calculation of the brake pad wear model in the DSC"
Associated Products (10)Associated Documents - January 1, 2015•Document ID: 10147641Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- M320115
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
Summary"SUBJECT Sporadic Electronic Power Steering (EPS) Warning Lamp when Starting Engine. An EPS warning lamp may light up in the instrument cluster intermittently when the engine starts. No steering assistance is available at this time. After a terminal change (switching the ignition off and on again), the warning lamp is no longer illuminated. Software error in the EPS control unit Fault code ""FC 4823E6-Internal control unit-power pack faulty"" may be stored in the EPS."
Associated Products (2)Associated Documents - January 1, 2015•Document ID: 10147640Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- M121714
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
Summary"SUBJECT DME Fault 168A20 for Knock Control: System Error Stored. A Check Control Message (CCM) is displayed: ""Drive Faulty; Drive at moderate speed."" z Fault 168A20: Knock control; system error is stored in the DME. CAUSE DME software."
Associated Products (2)Associated Documents - January 1, 2015•Document ID: 10057573Service Bulletin/Repair InstructionsSTEERING:ELECTRIC POWER ASSIST SYSTEM; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SIM-32-01-15
- Date Added:
- June 10, 2015
- Manufacturer:
- MINI
SummaryMINI: DUE TO AN ERROR IN SOFTWARE, ONCE ENGINE STARTS, ELECTRONIC POWER STEERING (EPS) WARNING LAMP WILL INTERMITTENTLY ILLUMINATE IN INSTRUMENT CLUSTER AND STEERING ASSISTANCE IS NOT AVAILABLE WHEN THIS OCCURS. MODEL 2013-14 F56. *PE
Associated Products (2)Associated Documents - December 1, 2014•Document ID: 10148212Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- M840214
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
SummaryService Action: Bluetooth Software (KISU Data) Update. This Service Action is being released to improve customer satisfaction as we strive to be number 1 in the JD Power Initial Quality Survey (IQS). This new KISU software improves the Bluetooth functionality in our vehicles, and it helps to keep us up-to-date with technology innovation. Please implement the Bluetooth Software Update Service Action. This Service Action will be in effect until March 2015. Thank you for your continuous support. Improved KISU data (Customer Initiated Software Update) is now available for installation in these vehicles via the USB port. Improved functionality for COMBOX: z Detailed view of the text messages z Android device connection stability (linked contacts causing BT disconnection) Improved functionality for HU-H: z Reconnection strategy z 3rd Party App Metadata - Album art and song title Note: This Service Action is to be completed only at the dealer. You (dealers) will be receiving vehicles from the VDCs that will require this Service Action to be completed prior to customer delivery.
Associated Products (14)Associated Documents - December 1, 2014•Document ID: 10148211Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- M650414
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
SummaryAutomated Activation of Navigation System During PDI/QC1. INFORMATION Important: The INITIAL NAV enabling code no longer needs to be pre-ordered through the Parts department! When the vehicle is connected to the diagnostic system ISTA to perform PDI/QC1, the step to activate the navigation system (part of Delete Transport Mode) will automatically request the INITIAL NAV enabling code (VIN-specific) without pre-ordering the enabling code. This enabling code will be automatically delivered through ISTA and it then activates the navigation system. Note: This VIN-specific NAV enabling code is then also automatically stored in the Repair Kit in the Aftersales Assistance Portal (ASAP). The automated INITIAL NAV enabling code request and activation of the navigation system will take no longer than 1 minute. After finishing "Delete Transport Mode," the navigation system in the vehicle will be active without entering the 20-digit INITIAL NAV enabling code manually or in ISTA. If the navigation system is not active and asking for the enabling code, turn off the ignition and wait for the head unit to enter sleep mode (approx. 3 minutes). After that, turn on the ignition again. The head unit will start up and the navigation system is activated. If the INITIAL NAV enabling code for first-time activation of the navigation system is not requested or delivered automatically, it still can be ordered manually through the Parts department and activated in the vehicle by entering the 20-digit enabling code manually.
Associated Products (14)Associated Documents - December 1, 2014•Document ID: 10148210Service Bulletin/Repair InstructionsVISIBILITY:SUN/MOON ROOF ASSEMBLY
- Mfr Comm. #:
- M540114
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
SummaryPanoramic Sunroof Rattles. A rattling noise is heard coming from the sunroof. This occurs when driving over rough road surfaces with the sunroof roller-blind fully open. The sunroof roller-blind hand grip vibrates against the frame.
Associated Products (2)Associated Documents - December 1, 2014•Document ID: 10148209Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES:DOORS:LATCH
- Mfr Comm. #:
- M510814
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
SummaryFront Doors Will Not Latch. The front door(s) may not latch or lock correctly when opening or closing. The condition mainly occurs with high or low temperature changes, making it difficult to duplicate. This only affects the Magna door lock and models without option 323 (automatic soft close). Manufacturing tolerances of the door lock
Associated Products (2)Associated Documents - December 1, 2014•Document ID: 10148207Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- M250214
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
SummaryAutomatic Transmission Selector Lever Will Not Move Out of Park. The transmission selector lever cannot be disengaged from the "P" position. This can occur very randomly and is difficult to reproduce. No faults are stored in the EGS control unit, and no warnings are displayed in the instrument cluster. For the most part, if the vehicle is locked and goes to sleep (the light in the hazard switch goes out), the problem is no longer present. Unfavorable EGS software
Associated Products (2)Associated Documents - December 1, 2014•Document ID: 10148206Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:DIESEL; POWER TRAIN
- Mfr Comm. #:
- M210114
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
SummaryDual Mass Flywheel: Diagnosis and Inspection. INFORMATION The following three criteria must to be checked, evaluated and the resulting findings documented on the repair order prior to replacing a dual-mass flywheel as defective: 1. Total rotational angle at no load condition (with applied torque less then 20 Nm) 2. Secondary plate longitudal axial play 3. Friction surface appearance changes due to thermal overload. PROCEDURE Refer to the attached "Dual-mass Flywheel Inspection" document for the complete inspection procedure. The dual-mass flywheel replacement is justified only if one or more of the following criteria are met: 1. The total rotational free-play measured at the flywheel gear ring is: Equal to or greater than 3 tooth gaps on N14/N18-equipped engines; Equal to or greater than 14 tooth gaps on B38/B46/B48-equipped engines. 2. The secondary plate total axial bearing play measured at outside diameter of the flywheel is: Equal to or greater than 3 mm on N14/N18-equipped engines; Equal to or greater than 5 mm on B38/B46/B48-equipped engines. 3. Significant discoloration in the adjoining area outside the friction ring, or a severe ablation/erosion of the friction area, is present. WARRANTY INFORMATION Warranty claims for replacing a Dual Mass Flywheel are subject to denial or debit when it is determined that the diagnostic procedures outlined above were not followed. ATTACHMENTS View PDF attachment M210114_Dual-Mass_Flywheel_Inspection.
Associated Products (15)Associated Documents - December 1, 2014•Document ID: 10148205Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- M170114
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
SummaryDamage to Radiator when Removing Fan Cowl. There is coolant leaking from the radiator after performing repairs where the fan cowl was removed.
Associated Products (2)Associated Documents - December 1, 2014•Document ID: 10148204Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- M121414
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
SummaryService Action: Program Control Units (DME). Due to unfavorable DME software, in certain driving conditions (usually after a few consecutive MSA starts), erroneous faults may be stored in the DSC control module causing the "Check Drivertrain" control message display.
Associated Products (1)Associated Documents - December 1, 2014•Document ID: 10148202Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- M110914
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
SummaryService Action: Replace Oil Filter Housing Assembly. A coolant leak could occur at the oil filter housing, resulting in overheating, loss of power and an engine warning light.
Associated Products (2)Associated Documents - December 1, 2014•Document ID: 10058241Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES:DOORS:LATCH; STRUCTURE:BODY:DOOR
- Mfr Comm. #:
- SIM-51-08-14
- Date Added:
- August 19, 2015
- Manufacturer:
- MINI
SummaryMINI: ON SOME MAGNA DOOR LOCKS AND DUE TO HIGH OR LOW TEMPERATURE CHANGES, THE FRONT DOOR(S) FAILS TO LATCH OR LOCK CORRECTLY UPON CLOSING OR OPENING AND MAKES IT DIFFICULT TO DUPLICATE. MODEL 2014 R60, R61. *PE
Associated Products (1)Associated Documents