Mazda Mazda6 Service Bulletins (2019)
419 manufacturer communications on file.
- November 20, 2019•Document ID: 10168118Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-049-19
- Date Added:
- November 21, 2019
- Manufacturer:
- MAZDA
SummarySome customers may complain about a Mazda Mobile Start (MMS) system malfunction. Use the information below to troubleshoot the customers complaint: ï· MAZDA MOBILE START (MMS) TROUBLESHOOTING GUIDE ï· CANNOT COMMUNICATE WITH VEHICLE ï· ERROR MESSAGE INSTALLED ON ANDROID DEVICES ï· COMMUNICATION ERRORS ï· MMS CHECK MODE - Use to verify system operation (see below).
Associated Products (23)2020 Mazda CX-32020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda62019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda62018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62016 Mazda CX-32016 Mazda CX-5+ 3 moreAssociated Documents - November 14, 2019•Document ID: 10168119Service Bulletin/Repair InstructionsEQUIPMENT; WHEELS
- Mfr Comm. #:
- RF-18-02R3
- Date Added:
- November 21, 2019
- Manufacturer:
- MAZDA
SummaryOn May 1, 2018, Japan produced vehicles starting using 17 mm hex lug nuts instead of 21 mm on the same size thread. When installing new lug nuts or the accessory Wheel Lock Set, make sure to use the appropriate part number for the vehicle you are working on. NOTE: The Mazda3 produced in Mexico is not affected. Use the GEPC or the Mazda Accessory web site [MXConnect (dealers.mazdausa.com)] to look up the correct part number for the vehicle you are working on.
Associated Products (10)Associated Documents - November 6, 2019•Document ID: 10168116Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-047-19
- Date Added:
- November 21, 2019
- Manufacturer:
- MAZDA
SummarySome customers may have one or more of the following complaints: ï· Infotainment system reboots at times ï· SiriusXM function grayed out ï· SiriusXM stops playing ï· No sound from SiriusXM but other sources work ï· SiriusXM system recovers after ignition OFF-ON. Do not perform any repairs at this time. Mazda is aware of the concerns and is working on a repair. This service information will be updated when a repair is available. NOTE: An interim solution is available for the SiriusXM concerns.
Associated Products (9)Associated Documents - November 4, 2019•Document ID: 10168068Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 04-006-19-3643
- Date Added:
- November 21, 2019
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit a groan noise from the front brakes when braking at a very low speed (approximately 6 mph / 10 km/h). This may be caused by a brake torque variation at that speed due to an inappropriate machining process of the brake disc surface.
Associated Products (7)Associated Documents - October 8, 2019•Document ID: 10166848Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- MT-003-19
- Date Added:
- October 30, 2019
- Manufacturer:
- MAZDA
SummarySome customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary:
Associated Products (96)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda22019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda22018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda22017 Mazda Mazda32017 Mazda Mazda6+ 76 moreAssociated Documents - September 30, 2019•Document ID: 10165676Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- MT-002-19
- Date Added:
- October 4, 2019
- Manufacturer:
- MAZDA
SummaryIf an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely. Metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold. When the new engine assembly is installed, debris in the intake manifold will be ingested into the new engine and cause internal damage.
Associated Products (106)2020 Mazda Mazda32019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda22019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda22018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda22017 Mazda Mazda3+ 86 moreAssociated Documents - September 27, 2019•Document ID: 10165675Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; BACK OVER PREVENTION
- Mfr Comm. #:
- 15-004-19-3639
- Date Added:
- October 4, 2019
- Manufacturer:
- MAZDA
SummarySome customer's may complain that In heavy rain, the front parking sensor system detects objects despite nothing being in front of the vehicle, and no related DTCs are stored. This may be caused by the ultrasonics diffusing inside when the front parking sensors get wet. As a result, the parking assist unit mistakenly detects objects near the front of the vehicle. To correct this issue, the detecting logic in close range has been improved.
Associated Products (2)Associated Documents - September 20, 2019•Document ID: 10165353Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SA-041-19
- Date Added:
- September 23, 2019
- Manufacturer:
- MAZDA
SummaryIf a customer comes in with the following concerns, contact Hotline for assistance. OIL PRESSURE WARNING light and/or the CHECK ENGINE light ON, DTC P055F and/or P0524 stored, No drivability concern or engine mechanical noise, Outside the VIN range in TSB 01-020/18.
Associated Products (5)Associated Documents - September 6, 2019•Document ID: 10165350Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HOOD; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SA-040-19
- Date Added:
- September 23, 2019
- Manufacturer:
- MAZDA
SummarySome customers may complain of a lack of power under heavy load without any warning lights or DTCs. This concern may be due to a loose or detached hood weatherstrip, which can cause a blockage or restriction in the air intake system.
Associated Products (31)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-9+ 11 moreAssociated Documents - August 16, 2019•Document ID: 10164046Service Bulletin/Repair InstructionsBACK OVER PREVENTION
- Mfr Comm. #:
- 09-033-19-3590
- Date Added:
- August 21, 2019
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit the rear parking sensor beeping without any obstacles behind it when the shift lever is shifted into Reverse. This concern only occurs when the rear USB power outlet (1) is broken. This is caused by noise from USB interference with the harness of the rear parking sensor (when the USB power outlet is broken).To correct this issue, the configuration of the USB power outlet has been changed to improve durability.
Associated Products (9)Associated Documents - August 12, 2019•Document ID: 10163824Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-015-19-3626
- Date Added:
- August 15, 2019
- Manufacturer:
- MAZDA
SummarySome vehicles may experience a lack of power and the check engine light on with DTC P061B:00 stored in PCM memory under one of the following conditions (A or B). DTC P061B:00 - [PCM] Internal control module torque calculation performance problem. Due to an improper control logic of the PCM, the engine torque calculation error detection is too sensitive. To eliminate this concern, the PCM software has been modified.
Associated Products (6)Associated Documents - August 7, 2019•Document ID: 10163827Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-031-19-3625
- Date Added:
- August 15, 2019
- Manufacturer:
- MAZDA
SummaryAfter the installation of a new instrument cluster, the message "Fctry" or âÃÂÃÂFactoryâÃÂàis displayed instead of the odometer. This concern may also occur when a room fuse is installed in a new vehicle. Some new instrument clusters are in the factory mode setting. Factory mode cancellation is required. NOTE: The concern is applicable to Calsonic Kansei instrument clusters. Not all trim levels are affected.
Associated Products (21)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda22019 Mazda Mazda62018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda22018 Mazda Mazda62017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda22017 Mazda Mazda62016 Mazda CX-32016 Mazda CX-92016 Mazda Mazda22016 Mazda Mazda62015 Mazda Mazda6+ 1 moreAssociated Documents - August 7, 2019•Document ID: 10163825Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; VISIBILITY; ELECTRICAL SYSTEM; SERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 09-010-19-3624
- Date Added:
- August 15, 2019
- Manufacturer:
- MAZDA
SummarySome customers may experience one or more electrical malfunctions after a vehicle body repair. The newly painted fender stay (2) may be causing a poor front harness (1) ground connection.The front fender stay (2) newly painted surface at ground point (3), where attachment bolt (4) is seated, may create a poor front harness ground connection. Customers concern can be resolved by sanding off paint at ground point (3) where attachment bolt (4) is seated. After installing the bolt (4), apply touch-up paint to the exposed base material area of the front fender stay.
Associated Products (26)2019 Mazda CX-32019 Mazda CX-52019 Mazda Mazda22019 Mazda Mazda62018 Mazda CX-32018 Mazda CX-52018 Mazda Mazda22018 Mazda Mazda32018 Mazda Mazda62017 Mazda CX-32017 Mazda CX-52017 Mazda Mazda22017 Mazda Mazda32017 Mazda Mazda62016 Mazda CX-32016 Mazda CX-52016 Mazda Mazda22016 Mazda Mazda32016 Mazda Mazda62015 Mazda CX-5+ 6 moreAssociated Documents - August 6, 2019•Document ID: 10164049Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SA-012-19
- Date Added:
- August 21, 2019
- Manufacturer:
- MAZDA
SummaryOn some vehicles, a tapping or knocking noise may be heard from the top end after the engine cools down (vehicle is parked overnight) or after it has been idling for an extended time. The tapping noise will decreases as the vehicle is being driven or if the RPM is held above 2500-3000 RPM. Click here for an example of the noise. Contact Hotline for instructions.
Associated Products (4)Associated Documents - August 1, 2019•Document ID: 10164052Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- SA-033-19
- Date Added:
- August 22, 2019
- Manufacturer:
- MAZDA
SummarySome customers may have a concern of a loose steering wheel. If a customer reports a loose steering wheel and the lock bolt is found to be loose, DO NOT simply re-tighten the steering wheel. Follow the steps below in the Repair Procedure.
Associated Products (6)Associated Documents - July 31, 2019•Document ID: 10163334Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-029-19a
- Date Added:
- August 1, 2019
- Manufacturer:
- MAZDA
SummaryThe database error discovered with IDS 114.00-114.02 release has been fixed with IDS 114.04 release and is now available for download.
Associated Products (91)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-5+ 71 moreAssociated Documents - July 30, 2019•Document ID: 10163327Service Bulletin/Repair InstructionsFORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; FORWARD COLLISION AVOIDANCE
- Mfr Comm. #:
- SA-003-19
- Date Added:
- August 1, 2019
- Manufacturer:
- MAZDA
SummarySome vehicles may have one of the following DTCs stored in memory: C1001:92 - Forward sensing camera (FSC) poor field of view. B14F0:92 - General temporary failure in forward sensing camera (FSC). DTC C1001:92 or B14F0:92 set as a past record for low visibility of the Forward Sensing Camera (FSC). It does not mean there is an actual FSC defect. In some cases the customer may have a concern with the Lane Departure Warning System (LDWS) and/or High Beam Control system (HBC). In other cases this DTC might be found without a related customer concern.NOTE: Instrument Cluster Multi-Information Display Warning Messages vary depending on vehicle year/model. See the Owner's Manual for details. If the vehicle has this DTC, DO NOT replace the FSC. Read below.
Associated Products (26)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-5+ 6 moreAssociated Documents - July 26, 2019•Document ID: 10163355Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SA-030-19
- Date Added:
- August 1, 2019
- Manufacturer:
- MAZDA
SummaryWhile inspecting turbocharger housings, you may see cracks (fractures) as shown below. The cracks do not affect engine performance or cause any noise, so replacement is NOT necessary.
Associated Products (7)Associated Documents - July 24, 2019•Document ID: 10163361Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 01-011-19-3586a
- Date Added:
- August 1, 2019
- Manufacturer:
- MAZDA
SummarySome customers may experience a check engine light illuminating with DTC P2096:00 stored in PCM memory. DTC P2096:00 - Air fuel too lean. NOTE: This concern occurs only on vehicles with PCMs manufactured by MITSUBISHI. Due to improper control logic of the PCM, a false error may be detected. To eliminate this concern, the PCM software has been modified.
Associated Products (4)Associated Documents - July 16, 2019•Document ID: 10163367Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- 07-002-19-3616
- Date Added:
- August 1, 2019
- Manufacturer:
- MAZDA
SummaryA musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. "Mazda Air Cooling Coil Coating" is available to encapsulate the mold to reduce odors. If the product is properly applied, it can effectively reduce the musty/mildew odor for up to three years.
Associated Products (107)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-5+ 87 moreAssociated Documents