Mazda Mazda6 Service Bulletins (2019)
419 manufacturer communications on file.
- June 10, 2020•Document ID: 10177012Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SA-053-20
- Date Added:
- July 3, 2020
- Manufacturer:
- MAZDA
SummaryWhen replacing manual or automatic transmission, make sure to remove the plug from the old transmission (as shown below) and then re-install it to the new transmission with a new washer. The new transmissions (including remanufactured A/T) have a shipping plug, as shown in the figures (M/T: black, rubber made; A/T: pink and black, with breather). This plug is for shipping use only and needs to be removed in order to re-install the original plug from the old transmission.
Associated Products (35)2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda3+ 15 moreAssociated Documents - June 5, 2020•Document ID: 10176966Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT; POWER TRAIN
- Mfr Comm. #:
- 01-008-20-3694
- Date Added:
- July 2, 2020
- Manufacturer:
- MAZDA
SummarySome customers may experience the CHECK ENGINE light ON with DTC P2229:00 stored in PCM memory. ï· P2229:00 (BARO sensor circuit high input). This concern will most likely occur on vehicles that have aftermarket wax applied in the engine compartment. Aftermarket wax applied in the engine compartment may adhere on the breather hole located at the bottom of the PCM, which may collect dust and result in a plugged filter. This breather hole is actually a filter for the air pressure sensor in the PCM. When the PCM gets hot, the internal air pressure may rise due to the plugged filter and result in DTC P2229:00. To eliminate this concern, the shape of the PCM bracket has been modified to not cover the breather hole and eliminate a gap between it and the PCM that may promote the residual liquid wax.
Associated Products (3)Associated Documents - June 4, 2020•Document ID: 10176968Service Bulletin/Repair InstructionsPOWER TRAIN:MANUAL TRANSMISSION
- Mfr Comm. #:
- 05-001-20-3699
- Date Added:
- July 2, 2020
- Manufacturer:
- MAZDA
SummarySome customers may complain of a shift shock felt when shifting into 3rd, 5th and/or R range with no A/T related DTC stored. The symptom can be temporarily repaired by A/T initial learning procedure, but may recur after multiple driving cycles. Applicable situations: ï· Shifting up: 2-3, (4-5) ï· Shifting down: 4-3, (6-5) NOTE:(4-5) and (6-5) are felt more than others due to the gear ratio. ï· Shifting into R: D-R, N-R, P-R. Improper control logic of the TCM may cause improper learning of R-3-5 brake engaging speed during certain driving situations. To correct this concern, the control logic of the TCM has been modified.
Associated Products (4)Associated Documents - April 23, 2020•Document ID: 10174567Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-006-20-3695
- Date Added:
- May 4, 2020
- Manufacturer:
- MAZDA
SummarySome vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it.
Associated Products (8)Associated Documents - March 27, 2020•Document ID: 10173225Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; POWER TRAIN
- Mfr Comm. #:
- SA-025-20a
- Date Added:
- April 6, 2020
- Manufacturer:
- MAZDA
SummaryA valve tapping or knocking noise may be heard from the top end after the engine cools down (the vehicle is parked overnight) or after it has been idling for an extended time. The tapping noise will decreases as the vehicle is being driven or if the rpm is held above 2500 -3000 RPM. This may be caused by the valve Hydraulic Lifters (HLA) bleeding down as the engine cools or when the engine has been idling for an extended period of time, creating excessive valve lash clearance.
Associated Products (4)Associated Documents - March 12, 2020•Document ID: 10173097Service Bulletin/Repair InstructionsPOWER TRAIN; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE AND ENGINE COOLING; SERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 00-001-20-3689
- Date Added:
- April 3, 2020
- Manufacturer:
- MAZDA
SummaryMazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
Associated Products (137)2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-3+ 117 moreAssociated Documents - March 11, 2020•Document ID: 10173253Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-041-20
- Date Added:
- April 6, 2020
- Manufacturer:
- MAZDA
SummarySome customers may complain about incorrect MAZDA CONNECT clock time. This may be caused by an incorrect clock GPS Sync setting.
Associated Products (30)2020 Mazda CX-32020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda3+ 10 moreAssociated Documents - March 11, 2020•Document ID: 10173227Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SA-035-20a
- Date Added:
- April 6, 2020
- Manufacturer:
- MAZDA
SummarySome customers may experience the CHECK ENGINE LIGHT ON with DTC P0126:00 (Thermostat stuck open) and one or more of the following symptoms: ï· The engine takes longer to warm up. ï· The engine temperature gauge fluctuates. ï· The low coolant temperature indicator (blue) light stays on longer or comes on while driving. ï· Poor heater performance, especially at idle.
Associated Products (6)Associated Documents - March 4, 2020•Document ID: 10173228Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- SA-036-20
- Date Added:
- April 6, 2020
- Manufacturer:
- MAZDA
SummaryThe ownerâÂÂs manual contains procedures and precautions for the maintenance and cleaning of plastic parts, like the brand emblem. However, it is still important to remind customers about these precautions. Customers should never use inadequate, harsh or aggressive cleaning products on plastic parts. CAUTION: Be aware that when cleaning the brand emblem, never use cleaning products that are highly acidic/alkaline detergent, organic solvents or those with aggressive chemical products, otherwise, the brand emblem may become cracked and/or deformed (as shown in the example below). Always refer customers to the ownerâÂÂs manual for proper cleaning using cold or lukewarm water and a mild, neutral detergent.
Associated Products (39)2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-3+ 19 moreAssociated Documents - March 3, 2020•Document ID: 10173249Service Bulletin/Repair InstructionsFORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SA-037-20
- Date Added:
- April 6, 2020
- Manufacturer:
- MAZDA
SummarySome vehicles may have one of the following DTCs stored in memory: ï· C1001:92 - Forward sensing camera (FSC) poor field of view ï· B14F0:92 - General temporary failure in forward sensing camera (FSC) DTC C1001:92 or B14F0:92 set as a past record for low visibility of the Forward Sensing Camera (FSC). It does not mean there is an actual FSC defect. ï· In some cases the customer may have a concern with the Lane Departure Warning System (LDWS) and/or High Beam Control system (HBC). ï· In other cases this DTC might be found without a related customer concern. NOTE: Instrument Cluster Multi-Information Display Warning Messages vary depending on vehicle year/model. See the Owner's Manual for details.
Associated Products (35)2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-3+ 15 moreAssociated Documents - February 28, 2020•Document ID: 10171840Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SA-035-20
- Date Added:
- February 29, 2020
- Manufacturer:
- MAZDA
SummarySome customers may experience the CHECK ENGINE LIGHT ON with DTC P0126:00 (Thermostat stuck open) and one or more of the following symptoms: The engine takes longer to warm up. The engine temperature gauge fluctuates. The low coolant temperature indicator (blue) light stays on longer or comes on while driving. Poor heater performance, especially at idle.
Associated Products (6)Associated Documents - February 27, 2020•Document ID: 10171833Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); EQUIPMENT
- Mfr Comm. #:
- SA-032-20
- Date Added:
- February 29, 2020
- Manufacturer:
- MAZDA
SummarySiriusXM Traffic Plus and Travel Link are displayed with Mazda in-vehicle factory navigation systems. Both of these services provide information in the U.S. & Canada. NOTE: SiriusXM Traffic Plus and Travel Link subscription is free of charge for 3 years only if equipped with factory installed navigation system. NOTE: 2019-2020 Mazda3 and 2020 CX-30 are not equipped with factory installed navigation system,however, it is available as a dealer installed accessory. SiriusXM Traffic Plus and Travel Link are available on the 2019-2020 Mazda3 and 2020 CX-30 Preferred Package and above, as a paid subscription. Traffic Plus feature requires in-vehicle navigation SD card. SiriusXM Satellite Radio trial subscription is free of charge for 3 months.
Associated Products (10)Associated Documents - February 26, 2020•Document ID: 10171843Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- 02-004-20-3685
- Date Added:
- February 29, 2020
- Manufacturer:
- MAZDA
SummarySome automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains.
Associated Products (39)2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-3+ 19 moreAssociated Documents - February 26, 2020•Document ID: 10171792Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SA-030-20
- Date Added:
- February 27, 2020
- Manufacturer:
- MAZDA
SummaryService part Automatic Transaxles (ATX) manufactured on or after July, 2018 are shipped with a blank TCM that requires configuration. NOTE: The following Caution is included with every ATX that requires configuration.
Associated Products (40)2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-3+ 20 moreAssociated Documents - February 18, 2020•Document ID: 10171780Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SA-011-20a
- Date Added:
- February 27, 2020
- Manufacturer:
- MAZDA
SummarySome customers may complain about a MAZDA CONNECT system reboot or blank screen. Use the troubleshooting chart below to repair the vehicle.
Associated Products (30)2020 Mazda CX-32020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda3+ 10 moreAssociated Documents - February 11, 2020•Document ID: 10171787Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-026-20
- Date Added:
- February 27, 2020
- Manufacturer:
- MAZDA
SummaryUse the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns. Audio System, Bluetoothî, Center Dislay, DTC, i-ACTIVESENSE, Maintenance Monitor, Navigation, Noise, Reboot / Frozen Screen / Slow Response, USB / Aux Voice Command, How to Check Navi SD Card VIN Lock.
Associated Products (30)2020 Mazda CX-32020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda3+ 10 moreAssociated Documents - February 11, 2020•Document ID: 10171786Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- SA-025-20
- Date Added:
- February 27, 2020
- Manufacturer:
- MAZDA
SummaryA valve tapping or knocking noise may be heard from the top end after the engine cools down (the vehicle is parked overnight) or after it has been idling for an extended time. The tapping noise will decreases as the vehicle is being driven or if the rpm is held above 2500-3000 RPM. This may be caused by the valve Hydraulic Lifters (HLA) bleeding down as the engine cools or when the engine has been idling for an extended period of time, creating excessive valve lash clearance.
Associated Products (4)Associated Documents - January 29, 2020•Document ID: 10170941Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- SA-019-20
- Date Added:
- February 4, 2020
- Manufacturer:
- MAZDA
SummarySome vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
Associated Products (34)2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda3+ 14 moreAssociated Documents - January 29, 2020•Document ID: 10170940Service Bulletin/Repair InstructionsEQUIPMENT; SEATS; SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER
- Mfr Comm. #:
- SA-020-20
- Date Added:
- February 4, 2020
- Manufacturer:
- MAZDA
SummaryDue to a vehicle side logic change for the vehicles listed above, the seat warming and seat ventilation systems will no longer automatically turn on when the vehicle is started using the MMS accessory. Both features will now require a manual setting every time the vehicles are restarted after being turned off. Refer to the vehicle ownerâÂÂs manual for more details on proper seat warmer/seat ventilation operation.
Associated Products (4)Associated Documents - January 28, 2020•Document ID: 10170815Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 04-002-20-3643a
- Date Added:
- January 30, 2020
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit a groan noise from the front brakes when braking at a very low speed (approximately 6 mph / 10 km/h). This may be caused by a brake torque variation at that speed due to an inappropriate machining process of the brake disc surface. Customers having this concern should have their vehicle repaired using the following repair procedure.
Associated Products (7)Associated Documents