Mazda Mazda6 Service Bulletins (2021)
299 manufacturer communications on file.
- January 26, 2021•Document ID: 10186699Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 02-003-21-3777
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummarySome customers may complain that the steering wheel is off center more than 3ð even when driving straight on a flat road.
Associated Products (7)Associated Documents - January 26, 2021•Document ID: 10186696Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-003-21-3776
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the CHECK ENGINE LIGHT ON with DTC P2610 and P2507 stored in memory after engine start and room fuse 15A (A) removed. P2610:00: Instrument cluster internal engine off timer performance problem. P2507:00: PCM battery voltage low input
Associated Products (5)Associated Documents - January 22, 2021•Document ID: 10186809Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- SA-007-21
- Date Added:
- February 6, 2021
- Manufacturer:
- MAZDA
SummarySome customers may complain that their seat warmers or seat ventilation do not turn on when the engine is restarted after being left on when turning off the engine. The logic has changed from previous Mazdas where the seat warmers and seat ventilation automatically turned on when the engine was restarted.
Associated Products (3)Associated Documents - January 21, 2021•Document ID: 10186705Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 09-004-21-3772
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummarySome vehicles may experience stains appearing on the hood, roof and/or trunk of the vehicle. This concern is most likely to be found in a cold weather areas just after the RAPGARD is removed at PDI. This may be caused by moisture which has been trapped and condensed between the paint and the RAPGARD. These types of stains can be removed with a heat gun or an infrared drier.
Associated Products (7)Associated Documents - January 21, 2021•Document ID: 10186704Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 09-003-21-3771
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummaryWhen encountering a vehicle with paint damage, refer to the "Mazda Paint Warranty Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
Associated Products (7)Associated Documents - January 21, 2021•Document ID: 10186703Service Bulletin/Repair InstructionsEQUIPMENT; VEHICLE SPEED CONTROL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-002-21-3770
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummaryIn accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
Associated Products (6)Associated Documents - January 21, 2021•Document ID: 10186698Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- 02-002-21-3769
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummarySome automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains.
Associated Products (7)Associated Documents - January 21, 2021•Document ID: 10186693Service Bulletin/Repair InstructionsWHEELS; STEERING; POWER TRAIN; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 00-001-21-3768
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummaryMazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
Associated Products (7)Associated Documents - January 14, 2021•Document ID: 10186695Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-002-21-3767
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummarySome vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it.
Associated Products (3)Associated Documents - December 14, 2020•Document ID: 10185181Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-004-20c
- Date Added:
- January 6, 2021
- Manufacturer:
- MAZDA
SummaryIn order to ensure key code security, MNAO has restricted key code access for the new auxiliary key. This Service Alert provides information on how to obtain the 10-digit key code needed for cutting a new auxiliary key blank if all auxiliary keys are lost.
Associated Products (7)Associated Documents - December 10, 2020•Document ID: 10185052Service Bulletin/Repair InstructionsEQUIPMENT; SEATS
- Mfr Comm. #:
- 09-007-20-3674a
- Date Added:
- January 5, 2021
- Manufacturer:
- MAZDA
SummaryAt PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. Customers having this concern should have their vehicle repaired by a qualified upholstery repair specialist using the following repair procedure.
Associated Products (6)Associated Documents - November 18, 2020•Document ID: 10183607Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- MT-006-20
- Date Added:
- December 3, 2020
- Manufacturer:
- MAZDA
SummarySome customers may complain about the following MAZDA CONNECT⢠Temperature Warning message: ï· Display is too Hot. Screen performance may be decreased until it cools. The warning message displays when the MAZDA CONNECT⢠screen temperature is above 176 degrees Fahrenheit (80 degrees Celsius).
Associated Products (2)Associated Documents - November 17, 2020•Document ID: 10183601Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-036-20-3756
- Date Added:
- December 3, 2020
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit a Connectivity Master Unit (CMU), a BLUETOOTHî hands-free unit or text messaging related concerns. To improve the handling of BLUETOOTHî hands-free and/or text messaging customer concerns, Mazda created a special service and parts exchange program as of February 2010.
Associated Products (5)Associated Documents - November 10, 2020•Document ID: 10183604Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- MT-005-20
- Date Added:
- December 3, 2020
- Manufacturer:
- MAZDA
SummarySome customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary: Engine Oil Consumption Inspection Guideline 1. Record the vehicle mileage. 2. Engine at normal operating temperature, top off engine oil level to the full mark on the dipstick. 3. Ask the customer to return to the dealer after 1200 miles to recheck the engine oil level. 4. After 1200 miles, engine at normal operating temperature, check the engine oil level on the dipstick. 5. Is the engine oil level above the low mark on the dipstick? ïÃÂ÷ Yes - No repair is necessary. ïÃÂ÷ No - Proceed to MGSS online or Workshop Manual (section 01-03 NO. 16 HIGH OIL CONSUMPTION/LEAKAGE).
Associated Products (4)Associated Documents - October 28, 2020•Document ID: 10182123Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SA-071-20
- Date Added:
- November 4, 2020
- Manufacturer:
- MAZDA
SummaryCurrently, the instructions on MGSS recommend the use of Loctite 962T or equivalent when installing a SKYACTIV cylinder head, but it is no longer available. The following 3 adhesives are alternatives available as an equivalent to Loctite 962T: Loctite 272, Loctite 518 Threebond TB-1386H
Associated Products (7)Associated Documents - October 15, 2020•Document ID: 10182122Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-070-20
- Date Added:
- November 4, 2020
- Manufacturer:
- MAZDA
SummaryAPPLE CARPLAY / ANDROID AUTO FREQUENTLY ASKED QUESTIONS (FAQ): NOTE: The following vehicles are not equipped with Apple CarPlay / Android Auto, but it can be activated using MDARS. See Activation instructions on MGSS - Infotainment - MAZDA CONNECT Updates - Apple Carplay / Android Auto MDARS Activation Instructions
Associated Products (7)Associated Documents - October 12, 2020•Document ID: 10182121Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-069-20
- Date Added:
- November 4, 2020
- Manufacturer:
- MAZDA
SummaryACCESSORY INSTRUCTIONS LOCATION: Accessory instructions can be found in the Accessory eCatalog. https://ecatalog.mazdausa.com
Associated Products (7)Associated Documents - October 7, 2020•Document ID: 10182128Service Bulletin/Repair InstructionsSTRUCTURE; VISIBILITY
- Mfr Comm. #:
- DRW33
- Date Added:
- November 4, 2020
- Manufacturer:
- MAZDA
SummaryDRW33 - CHROME PLATED WINDOW MOLDINGS CONCERN FROM PACIFIC TYPHOON: On certain subject vehicles parked outside after production, it is possible that the chrome plated window moldings may be dirty or have rust spots from a Typhoon that recently passed by Hiroshima and Hofu Japan. These vehicles may have been exposed to misty seawater caused by a strong wind and could have potentially sustained chrome molding damage. The vehicles subject to this DRW may need additional cleaning, polishing, or possibly molding replacement.
Associated Products (4)Associated Documents - August 18, 2020•Document ID: 10179315Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-063-20
- Date Added:
- September 3, 2020
- Manufacturer:
- MAZDA
SummaryWhen performing vehicle services such as control unit software update, control unit registration/activation, CMU log data retrieval, etc., always use the GR8 battery charger SST to maintain battery voltage.
Associated Products (7)Associated Documents