Mazda CX-30 Service Bulletins (2021)
616 manufacturer communications on file.
- February 2, 2023•Document ID: 10232302Service Bulletin/Repair InstructionsSTEERING; WHEELS
- Mfr Comm. #:
- SA-008-23
- Date Added:
- March 3, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit a steering shimmy or body vibration during the PDI test drive or during the first few miles of driving after the vehicle has been delivered to the customer due to flat spots on the tires. Flat spots on tires may be caused by improper maintenance during dealer storage (e.g.: Vehicle was left stationary for a prolonged period of time in high ambient temperatures).
Associated Products (19)Associated Documents - February 1, 2023•Document ID: 10232402Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 09-007-23
- Date Added:
- March 4, 2023
- Manufacturer:
- MAZDA
SummaryAt PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. Customers having this concern should have their vehicle repaired by a qualified upholstery repair specialist using the following repair procedure.
Associated Products (27)2023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-302023 Mazda MX-52022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-302022 Mazda MX-52021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda32021 Mazda Mazda62021 Mazda MX-5+ 7 moreAssociated Documents - January 31, 2023•Document ID: 10230891Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-003-23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may have a "LOW ENGINE OIL LEVEL" warning message and an engine oil level warning light on in the instrument cluster with DTC P250F:00 stored in memory, and the oil level has actually decreased to near low. - DTC P250F:00 - Engine oil level signal: engine oil level low This is caused by an oil consumption increase due to damage of the valve seals on the exhaust side. To eliminate this concern, the design of these valve seals has been modified.
Associated Products (7)Associated Documents - January 25, 2023•Document ID: 10230866Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- RF-23-02
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummaryDue to the supply chain shortages for BDGF-66-5G0G, hardware has been confirmed compatible between BDGF-66-5G0B up to the G suffix. This can be used for repair with vehicles originally equipped with C to G level suffix parts.
Associated Products (11)Associated Documents - January 23, 2023•Document ID: 10230902Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 09-006-23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummaryWhen encountering a vehicle with paint damage, refer to the "Mazda Paint Warranty Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
Associated Products (38)2023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-302022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-302022 Mazda MX-52021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda32021 Mazda Mazda62021 Mazda MX-52020 Mazda CX-3+ 18 moreAssociated Documents - January 23, 2023•Document ID: 10230880Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-006/23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about the infotainment system and/or the MyMazda App showing incorrect clock and/or tire pressures and/or tire pressure missing. This may be caused by: - Incorrect calendar entry (month/day/year) after a battery disconnect - Infotainment system software update. - BCM TPMS unlearn during vehicle storage or transport. - Wheel/Tire change
Associated Products (18)Associated Documents - January 23, 2023•Document ID: 10230865Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- RF-23-01
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummaryWhen servicing SKYACTIV engine vehicles requiring to replace the Oil Galley Plug and Crush Washer, order the required part numbers below. These parts are not listed in GEPC and were previously listed as "non-serviceable" in the cylinder block diagram.
Associated Products (64)2023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-52022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-52021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda22021 Mazda Mazda32021 Mazda Mazda62021 Mazda MX-52020 Mazda CX-3+ 44 moreAssociated Documents - January 19, 2023•Document ID: 10230878Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-005/22
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (18)Associated Documents - January 13, 2023•Document ID: 10230877Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- SA-004/23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome customers may report hearing an unusual noise coming from the power liftgate (PLG) when it is unlatching to open or latching closed. This is caused by an internal fault in the liftgate latch and/or loose bolts holding the latch to the liftgate.
Associated Products (5)Associated Documents - January 11, 2023•Document ID: 10230875Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SA-003/23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
Associated Products (55)2023 Mazda CX-302023 Mazda CX-52023 Mazda CX-92023 Mazda Mazda32022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-302021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda32021 Mazda Mazda62021 Mazda MX-52020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-9+ 35 moreAssociated Documents - January 9, 2023•Document ID: 10230900Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- 09-004-23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome customers may experience that after the doors are locked and the Fuel Door Lock Delay with MAZDA CONNECT has passed (default setting is 90 seconds), the fuel-filler lid does not lock and can be opened when pressing it. NOTE: - The fuel-filler lid does not lock immediately after the doors are locked, but after the time set in the Fuel Door Lock Delay (0, 30, 60, 90, and 120 seconds). - Although the root cause has not been identified, the vehicle should be repaired by adjusting the fuel-filler lid opener cable position when there is a customer complaint.
Associated Products (5)Associated Documents - January 6, 2023•Document ID: 10230873Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- SA-002/23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about hearing noise from their headlamps. While some noise is normal from the electric motor, if it is louder in one headlamp than the other or both are significantly louder than a known good vehicle
Associated Products (4)Associated Documents - January 4, 2023•Document ID: 10230888Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-001-23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about a poor acceleration and rough idling or the CHECK ENGINE light ON with DTC P030X:00 (only turbo engines are applicable; non-turbo engines are NOT applicable). - In most cases, P030X is stored, but sometimes not. - Sometimes the CHECK ENGINE light does not recognize this engine concern. This is caused by the variable valve in the exhaust manifold seizing and causing the exhaust port to become hot and the exhaust valve seat to wear unevenly, resulting in compression leakage. To eliminate this concern, the design of the exhaust manifold has been modified.
Associated Products (15)Associated Documents - January 3, 2023•Document ID: 10230894Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-001-23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit DTC U3000:04 (Telematics communication unit internal malfunction) stored after the connected service contract has been discontinued (only vehicles in which the customer opted out of CV services are affected - CSP04). This is caused by improper control software of telematics communication unit. To eliminate this concern, the control software of telematics communication unit has been modified.
Associated Products (14)Associated Documents - December 22, 2022•Document ID: 10228661Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 04-006-22
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about hearing a grinding noise and/or vibration occur when applying the brake. This is due to rust on the rear brake disc plate.
Associated Products (11)Associated Documents - December 21, 2022•Document ID: 10228662Service Bulletin/Repair InstructionsVISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 07-004-22b
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain the A/C blows warm. This may be caused by one of two things. Cause 1: After accelerating in hot weather, the A/C blows warm air for a longer time than other models. This is caused by improper control software of the PCM not allowing the A/C compressor to resume properly after acceleration. During a hard acceleration above a certain throttle level opening, the PCM stops the A/C compressor operation for better acceleration. It then resumes the compressor operation after the acceleration. To eliminate this concern, the control software of the PCM has been modified. Cause 2: Insufficient cooling performance at ambient temperature of around 68 ðF (20 ðC) in daytime. This is caused when both the ambient temperature and the cabin temperature are at around 20 ðC (68 ðF), auto A/C set at around 20 ðC (68 ðF) may not cool down the cabin temperature properly. To eliminate this concern, control software of the dash-electrical supply unit (Dash-ESU) has been modified.
Associated Products (7)Associated Documents - December 20, 2022•Document ID: 10228657Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- SA-078-22
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
Associated Products (54)2023 Mazda CX-302023 Mazda CX-52023 Mazda CX-92023 Mazda Mazda32022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda32021 Mazda Mazda62021 Mazda MX-52020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda3+ 34 moreAssociated Documents - December 19, 2022•Document ID: 10228659Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-017-22
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may experience an engine stall when hard accelerating from a stop (often difficult to reproduce on a test drive), no codes are stored and the vehicle easily restarts with no other drivability concerns. This is only caused in certain situations by the torque reduction calibration in the PCM software. To correct this issue, the control software of the PCM has been modified to optimize the torque reduction feature.
Associated Products (7)Associated Documents - December 14, 2022•Document ID: 10228650Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-004-22g
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (17)Associated Documents - December 13, 2022•Document ID: 10228664Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-048-22
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit the following symptoms with DTC P05A0:00 (Active air shutter and the opening angle abnormality (sticking)) stored in memory. Symptom 1 [Mazda3 and CX-30]: The active air shutter is working, but DTC P05A0:00 is stored in memory. Cause 1: This is caused by improper control software of the PCM detecting the DTC immediately without performing the failsafe operation. When the active air shutter detects unusual torque, it is designed to repeat the open/close cycles up to three times as a failsafe to try to remove the object(s) which temporarily disturbed the movement. Symptom 2 [Mazda3, CX-30 and MX-30]: The active air shutter is frozen by snow and/or ice under freezing temperatures with DTC P05A0:00 stored in memory. Cause 2 [Mazda3 and CX-30]: When a temporary blocking of the active air shutter is expected to be caused by snow and/or ice and the intake air temperature is above the freezing point, DTC P05A0:00 may be unintentionally detected. [MX-30]: When a temporary blocking of the active air shutter is expected to be caused by snow and/or ice and the heater is turned on, DTC P05A0:00 may be unintentionally detected
Associated Products (6)Associated Documents