Mazda 626 Service Bulletins (2001)

97 manufacturer communications on file.

January 2, 2019•Document ID: 10153308
Service Bulletin/Repair Instructions
ELECTRICAL SYSTEM
Mfr Comm. #:
01-001-19-3551
Date Added:
February 19, 2019
Manufacturer:
MAZDA
Summary
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
Associated Products (144)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5+ 124 more
Associated Documents
- Download MC-10153308-0001.pdf↗
October 10, 2018•Document ID: 10148072
Service Bulletin/Repair Instructions
VEHICLE SPEED CONTROL; EQUIPMENT
Mfr Comm. #:
09-034-18-3430a
Date Added:
November 13, 2018
Manufacturer:
MAZDA
Summary
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
Associated Products (167)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9+ 147 more
Associated Documents
- Download MC-10148072-0001.pdf↗
October 10, 2018•Document ID: 10148068
Service Bulletin/Repair Instructions
EQUIPMENT; STRUCTURE
Mfr Comm. #:
09-014-18-3443a
Date Added:
November 13, 2018
Manufacturer:
MAZDA
Summary
When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-Store (part number: 9999-95-MPPG-12).
Associated Products (146)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9+ 126 more
Associated Documents
- Download MC-10148068-0001.pdf↗
October 10, 2018•Document ID: 10148003
Service Bulletin/Repair Instructions
SERVICE BRAKES, HYDRAULIC; EQUIPMENT
Mfr Comm. #:
00-003-18-3480a
Date Added:
November 13, 2018
Manufacturer:
MAZDA
Summary
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claims are subject to denial or debit.
Associated Products (144)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9+ 124 more
Associated Documents
- Download MC-10148003-0001.pdf↗
October 10, 2018•Document ID: 10148002
Service Bulletin/Repair Instructions
EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Mfr Comm. #:
00-001-18-3446a
Date Added:
November 13, 2018
Manufacturer:
MAZDA
Summary
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
Associated Products (143)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9+ 123 more
Associated Documents
- Download MC-10148002-0001.pdf↗
September 6, 2018•Document ID: 10145242
Service Bulletin/Repair Instructions
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
Mfr Comm. #:
01-016-18-3522
Date Added:
October 9, 2018
Manufacturer:
MAZDA
Summary
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not an indication of an engine concern and will not cause reduced driveability or durability of the engine or any of its emission components. The sulfur smell or 'rotten egg' odor is caused by high amounts of sulfur in the gasoline being used in the vehicle. Sulfur is normally eliminated during the refining process, but the EPA regulation of sulfur in gasoline differs from state to state. Vehicles using fuel containing high amounts of sulfur will most likely emit sulfur smell from the exhaust system. When high sulfur fuel is burned, there is a chemical reaction in the catalytic converter causing the sulfur to oxidize. As the vehicle is driven, the oxidizing reaction odor in the converter will decrease with mileage and age.
Associated Products (137)
2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda3 2016 Mazda Mazda6 2016 Mazda MX-5 2015 Mazda CX-5 2015 Mazda CX-9+ 117 more
Associated Documents
- Download MC-10145242-0001.pdf↗
August 31, 2018•Document ID: 10144333
Service Bulletin/Repair Instructions
VEHICLE SPEED CONTROL
Mfr Comm. #:
09-034-18-3430
Date Added:
September 10, 2018
Manufacturer:
MAZDA
Summary
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
Associated Products (161)
2019 Mazda CX-3 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda3 2016 Mazda Mazda6 2016 Mazda MX-5 2015 Mazda CX-5+ 141 more
Associated Documents
- Download MC-10144333-0001.pdf↗
May 11, 2018•Document ID: 10142515
Service Bulletin/Repair Instructions
SERVICE BRAKES
Mfr Comm. #:
00-003-18-3480
Date Added:
July 2, 2018
Manufacturer:
MAZDA
Summary
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claimsare subject to denial or debit.
Associated Products (139)
2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda3 2016 Mazda Mazda6 2016 Mazda MX-5 2015 Mazda CX-5 2015 Mazda CX-9+ 119 more
Associated Documents
- Download MC-10142515-0001.pdf↗
April 16, 2018•Document ID: 10136782
Service Bulletin/Repair Instructions
EQUIPMENT:APPLIANCE:AIR CONDITIONER
Mfr Comm. #:
07-002-18-3432
Date Added:
May 14, 2018
Manufacturer:
MAZDA
Summary
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. "Mazda Air Cooling Coil Coating" is available to encapsulate the mold to reduce odors. If the product is properly applied, it can effectively reduce the musty/mildew odor for up to three years. NOTE: See parts information for Mazda Air Cooling Coil Coating and Kit part numbers. This treatment provides a durable coating that will aid to prevent biological reactions that lead to odorconcerns. It is applied to the evaporator in a misted form that is introduced by way of the cabin air filter, the re-circulate door, the blower motor resistor access, or the blower motor air intake. Proper application requires the evaporator surface to be: Relatively clean and free of leaves, dust build-up and debris. Thoroughly dried, and the product cured onto it after application. NOTE: Keep the cooling unit dry by leaving the blower fan ON (at least on low), even if the A/C is not being used. In low humidity (dry) conditions, keep the ventilation system in the "FRESH" mode all the time, or as much as possible. In high humidity conditions, or if the air has a lot of dust or pollen, keep the system in the "RECIRCULATION" mode. A few minutes before reaching a destination, turn the A/C OFF, but leave the blower fan ON. This stops the accumulation of condensation on the evaporator/cooling unit, and it helps dry the inside of the cooling unit. A/C odor is not unique to Mazda vehicles as it will occur in other makes and models. To minimize A/C odor, suggest the following to the customers.
Associated Products (98)
2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda3 2016 Mazda Mazda6 2016 Mazda MX-5 2015 Mazda CX-5 2015 Mazda CX-9 2015 Mazda Mazda3 2015 Mazda Mazda5 2015 Mazda Mazda6+ 78 more
Associated Documents
- Download MC-10136782-0001.pdf↗
March 26, 2018•Document ID: 10134930
Service Bulletin/Repair Instructions
SUSPENSION:FRONT:SHOCK ABSORBER; SUSPENSION:REAR:SHOCK ABSORBER
Mfr Comm. #:
02-006-18-3449
Date Added:
April 23, 2018
Manufacturer:
MAZDA
Summary
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
Associated Products (128)
2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda3 2016 Mazda Mazda6 2016 Mazda MX-5 2015 Mazda CX-5 2015 Mazda CX-9+ 108 more
Associated Documents
- Download MC-10134930-0001.pdf↗
March 26, 2018•Document ID: 10134929
Service Bulletin/Repair Instructions
ELECTRICAL SYSTEM:12V/24V/48V BATTERY
Mfr Comm. #:
01-009-18-3452
Date Added:
April 23, 2018
Manufacturer:
MAZDA
Summary
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
Associated Products (137)
2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda3 2016 Mazda Mazda6 2016 Mazda MX-5 2015 Mazda CX-5 2015 Mazda CX-9+ 117 more
Associated Documents
- Download MC-10134929-0001.pdf↗
March 26, 2018•Document ID: 10134928
Service Bulletin/Repair Instructions
ELECTRICAL SYSTEM:12V/24V/48V BATTERY
Mfr Comm. #:
01-008-18-3451
Date Added:
April 23, 2018
Manufacturer:
MAZDA
Summary
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
Associated Products (138)
2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda3 2016 Mazda Mazda6 2016 Mazda MX-5 2015 Mazda CX-5 2015 Mazda CX-9+ 118 more
Associated Documents
- Download MC-10134928-0001.pdf↗
March 26, 2018•Document ID: 10134703
Service Bulletin/Repair Instructions
EQUIPMENT ADAPTIVE/MOBILITY
Mfr Comm. #:
09-019-18-3450
Date Added:
April 23, 2018
Manufacturer:
MAZDA
Summary
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is stacked one on top of another. Use these points at your dealership to protect our mutual operations and to help ensure our customers' safety.
Associated Products (138)
2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda3 2016 Mazda Mazda6 2016 Mazda MX-5 2015 Mazda CX-5 2015 Mazda CX-9+ 118 more
Associated Documents
- Download MC-10134703-0001.pdf↗
March 22, 2018•Document ID: 10134702
Service Bulletin/Repair Instructions
STRUCTURE
Mfr Comm. #:
09-014-18-3443
Date Added:
April 23, 2018
Manufacturer:
MAZDA
Summary
When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
Associated Products (141)
2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda2 2016 Mazda Mazda3 2016 Mazda Mazda5 2016 Mazda Mazda6 2016 Mazda MX-5+ 121 more
Associated Documents
- Download MC-10134702-0001.pdf↗
March 22, 2018•Document ID: 10134699
Service Bulletin/Repair Instructions
EQUIPMENT
Mfr Comm. #:
00-001-18-3446
Date Added:
April 23, 2018
Manufacturer:
MAZDA
Summary
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
Associated Products (131)
2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda3 2016 Mazda Mazda5 2016 Mazda Mazda6 2016 Mazda MX-5 2015 Mazda CX-5+ 111 more
Associated Documents
- Download MC-10134699-0001.pdf↗
August 7, 2017•Document ID: 10118467
Service Bulletin/Repair Instructions
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
Mfr Comm. #:
09-035-17-3080
Date Added:
October 4, 2017
Manufacturer:
MAZDA
Summary
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
Associated Products (161)
2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda3 2016 Mazda Mazda6 2016 Mazda MX-5 2015 Mazda CX-5 2015 Mazda CX-9+ 141 more
Associated Documents
- Download MC-10118467-0001.pdf↗
July 12, 2017•Document ID: 10111036
Service Bulletin/Repair Instructions
ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
Mfr Comm. #:
SA-061-17
Date Added:
August 10, 2017
Manufacturer:
MAZDA
Summary
In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
Associated Products (125)
2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda2 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda2 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda2 2016 Mazda Mazda3 2016 Mazda Mazda6+ 105 more
Associated Documents
- Download MC-10111036-0001.pdf↗
August 11, 2016•Document ID: 10092487
Service Bulletin/Repair Instructions
EQUIPMENT
Mfr Comm. #:
00-004-16-3237
Date Added:
February 22, 2017
Manufacturer:
MAZDA
Summary
RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL. FOR MAZDA CUSTOMERS WHO HAVE QUESTIONS ABOUT SAFELY LIFTING THEIR VEHICLE TO CHANGE A FLAT TIRE OR TO INSTALL SNOW CHAINS, PLEASE PROVIDE A COPY OF THE ATTACHED HANDOUT FOR THEM. ALSO, BE SURE TO ALWAYS DIRECT CUSTOMERS TO FOL-LOW THE DIRECTIONS IN THE OWNER'S MANUAL.
Associated Products (78)
2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda2 2017 Mazda Mazda3 2017 Mazda Mazda6 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda2 2016 Mazda Mazda3 2016 Mazda Mazda6 2015 Mazda CX-5 2015 Mazda CX-9 2015 Mazda Mazda2 2015 Mazda Mazda3 2015 Mazda Mazda6 2014 Mazda CX-5 2014 Mazda CX-9 2014 Mazda Mazda2+ 58 more
Associated Documents
- Download MC-10092487-0001.pdf↗
February 26, 2016•Document ID: 10213429
Service Bulletin/Repair Instructions
EQUIPMENT
Mfr Comm. #:
0901216
Date Added:
June 6, 2022
Manufacturer:
MAZDA
Summary
Paint damage Mazda pocket paint guide
Associated Products (100)
2016 Mazda Mazda2 2016 Mazda Mazda3 2016 Mazda Mazda5 2016 Mazda Mazda6 2015 Mazda Mazda2 2015 Mazda Mazda3 2015 Mazda Mazda5 2015 Mazda Mazda6 2014 Mazda Mazda2 2014 Mazda Mazda3 2014 Mazda Mazda5 2014 Mazda Mazda6 2013 Mazda Mazda2 2013 Mazda Mazda3 2013 Mazda Mazda5 2013 Mazda Mazda6 2012 Mazda Mazda2 2012 Mazda Mazda3 2012 Mazda Mazda5 2012 Mazda Mazda6+ 80 more
Associated Documents
- Download MC-10213429-0001.pdf↗
February 26, 2016•Document ID: 10213326
Service Bulletin/Repair Instructions
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Mfr Comm. #:
0000216
Date Added:
June 6, 2022
Manufacturer:
MAZDA
Summary
Mazda guidelines for factory scheduled maintenance
Associated Products (116)
2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9 2016 Mazda Mazda2 2016 Mazda Mazda3 2016 Mazda Mazda5 2016 Mazda Mazda6 2016 Mazda MX-5 2016 Mazda RX-8 2015 Mazda CX-5 2015 Mazda CX-9 2015 Mazda Mazda2 2015 Mazda Mazda3 2015 Mazda Mazda5 2015 Mazda Mazda6 2015 Mazda MX-5 2015 Mazda RX-8 2014 Mazda CX-3 2014 Mazda CX-5 2014 Mazda CX-9+ 96 more
Associated Documents
- Download MC-10213326-0001.pdf↗

← Back to Mazda 626