Jeep Cherokee Service Bulletins (2020)
388 manufacturer communications on file.
- October 23, 2020•Document ID: 10183042Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STRUCTURE:BODY:HATCHBACK/LIFTGATE
- Mfr Comm. #:
- S2008000162
- Date Added:
- November 30, 2020
- Manufacturer:
- JEEP
SummaryPower Lift-gate Will Not Close From Power Lift-gate Button
Associated Products (1)Associated Documents - October 20, 2020•Document ID: 10223928Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- S2008000131RevB
- Date Added:
- October 17, 2022
- Manufacturer:
- JEEP
SummaryU11E9 Lost Communication With AGS (Active Grille Shutter), Malfunction Indicator Lamp (MIL) Illuminated
Associated Products (2)Associated Documents - October 20, 2020•Document ID: 10183039Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- S2008000131 Rev.
- Date Added:
- November 30, 2020
- Manufacturer:
- JEEP
SummaryU11E9 Lost Communication With AGS (Active Grille Shutter), Malfunction Indicator Lamp (MIL) Illuminated
Associated Products (2)Associated Documents - October 15, 2020•Document ID: 10223971Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 0700220
- Date Added:
- October 17, 2022
- Manufacturer:
- JEEP
SummaryHeater Hoses Installed Incorrectly This bulletin involves inspecting the heater hoses and possibly draining the engine coolant, swapping the heater hoses and refilling the engine coolant. Some vehicles may have been built with one or more of the following:Heater hoses installed in reversed order. If the coolant was drained and replaced, a sign the heater hoses are reversed is the vehicle will also make a gurgling noise.
Associated Products (1)Associated Documents - October 15, 2020•Document ID: 10183082Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- 07-002-20
- Date Added:
- November 30, 2020
- Manufacturer:
- JEEP
SummaryHeater Hoses Installed Incorrectly This bulletin involves inspecting the heater hoses and possibly draining the engine coolant, swapping the heater hoses and refilling the engine coolant. Some vehicles may have been built with one or more of the following:Heater hoses installed in reversed order. If the coolant was drained and replaced, a sign the heater hoses are reversed is the vehicle will also make a gurgling noise.
Associated Products (1)Associated Documents - October 1, 2020•Document ID: 10223951Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING; PARKING BRAKE
- Mfr Comm. #:
- 1808520REVA
- Date Added:
- October 17, 2022
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC).P2610 - PCM Internal Engine Off Timer Performance. Customers may experience one or more of the following:An audible clunk after applying throttle from a coasting condition, predominantly in fifth and sixth gear while driving 48 - 72 kph (30 - 45 mph). A message on the instrument cluster stating ?Speed limiter ready? after the first press of the speed limiter button and the Active Vehicle Speed Limiter (AVSL) is inoperative(Equipped with NH2 Sales Code Only).Inform the customer after the software update that the proper operative will be when the customer presses the speed limiter button twice, a message on the instrument cluster stating ?Speed limiter ready?and the AVSL feature will work correctly (Equipped with NH2 Sales Code Only).
Associated Products (1)Associated Documents - October 1, 2020•Document ID: 10183062Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- 18-085-20 REV. A
- Date Added:
- November 30, 2020
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC).P2610 - PCM Internal Engine Off Timer Performance. Customers may experience one or more of the following:An audible clunk after applying throttle from a coasting condition, predominantly in fifth and sixth gear while driving 48 - 72 kph (30 - 45 mph). A message on the instrument cluster stating ?Speed limiter ready? after the first press of the speed limiter button and the Active Vehicle Speed Limiter (AVSL) is inoperative(Equipped with NH2 Sales Code Only).Inform the customer after the software update that the proper operative will be when the customer presses the speed limiter button twice, a message on the instrument cluster stating ?Speed limiter ready?and the AVSL feature will work correctly (Equipped with NH2 Sales Code Only).
Associated Products (1)Associated Documents - September 26, 2020•Document ID: 10181636Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HOOD
- Mfr Comm. #:
- 23-007-20 REV. A
- Date Added:
- October 26, 2020
- Manufacturer:
- JEEP
SummaryHood Closing Effort This bulletin involves informing technicians that the hood should not be adjusted for closing effort being high. The customer may describe that the hood takes extra effort to close.
Associated Products (1)Associated Documents - September 23, 2020•Document ID: 10181516Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE
- Mfr Comm. #:
- 9001496
- Date Added:
- October 26, 2020
- Manufacturer:
- DODGE
SummaryCAP, Engine Oil, Fill (O RING, Oil Filler Cap) For all model years, models and engines using oil fill caps with O-Ring seals: These O-Rings are now available for service. The green O-Ring is part 68029299A$. The black O-Ring is to be serviced by the green O-Ring. The blue O-Ring (thicker cross section than green & black) is part 68029300A$.~ If ordering this oil filler cap for a warranty repair due to a damaged/missing O-ring, please note that returned caps replaced for an O-ring issue will be subject to chargeback.
Associated Products (16)Associated Documents - September 18, 2020•Document ID: 10181567Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- S1823000054 Rev.
- Date Added:
- October 26, 2020
- Manufacturer:
- JEEP
Summary(Revision C) Hood Flutter or Shake While Driving
Associated Products (2)Associated Documents - September 15, 2020•Document ID: 10181558Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); EQUIPMENT
- Mfr Comm. #:
- S2008000141
- Date Added:
- October 26, 2020
- Manufacturer:
- RAM
SummaryNavigation Shows Incorrect Location
Associated Products (42)2020 Chrysler 3002020 Chrysler Pacifica2020 Dodge Challenger2020 Dodge Charger2020 Dodge Durango2020 Jeep Cherokee2020 Jeep Compass2020 Jeep Gladiator2020 Jeep Grand Cherokee2020 Jeep Renegade2020 Jeep Wrangler2020 Ram 15002020 Ram 25002020 Ram 35002020 Ram 45002019 Chrysler 3002019 Chrysler Pacifica2019 Dodge Challenger2019 Dodge Charger2019 Dodge Durango+ 22 moreAssociated Documents - September 12, 2020•Document ID: 10181553Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- S2008000062 Rev.
- Date Added:
- October 26, 2020
- Manufacturer:
- JEEP
Summary(Revision A) No Start, Check Engine Lamp On, Multiple Cluster Warning Lamps On
Associated Products (2)Associated Documents - September 11, 2020•Document ID: 10181606Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 18-085-20
- Date Added:
- October 26, 2020
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience the following:An audible clunk after applying throttle from a coasting condition, predominantly in fifth and sixth gear while driving 48 - 72 kph (30 - 45 mph).
Associated Products (1)Associated Documents - September 11, 2020•Document ID: 10181605Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 21-020-20 REV. A
- Date Added:
- October 26, 2020
- Manufacturer:
- JEEP
SummaryFlash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set:P1614 - ECU Reset-Recovery Occurred. Customers may also experience the following: An audible clunk after applying throttle from a coasting condition, predominantly in fifth and sixth gear while driving 48-72 kph (30-45 mph).
Associated Products (1)Associated Documents - September 10, 2020•Document ID: 10181549Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- S2008000131 Rev.
- Date Added:
- October 26, 2020
- Manufacturer:
- JEEP
Summary(Revision A) U11E9 Lost Communication With AGS (Active Grille Shutter), Malfunction Indicator Lamp (MIL) Illuminated
Associated Products (2)Associated Documents - September 9, 2020•Document ID: 10181600Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- 18-080-20
- Date Added:
- October 26, 2020
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates - AN-K4-18-20200824 Refer to China Joint Venture (JV) released document AN-K4-18-20200824, for details on this service action.
Associated Products (1)Associated Documents - August 29, 2020•Document ID: 10221900Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 1800620REVA
- Date Added:
- September 26, 2022
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DTC.P1614-00 - ECU Reset-Recovery Occurred(North America Only). Customers may experience a message on the instrument cluster stating " Speed limiter ready " after the first press of the speed limiter button and the Active Vehicle Speed Limiter (AVSL) is inoperative(Sales Code NH2).Inform the customer after the software update that the proper operative will be when the customer presses the speed limiter button twice a message on the instrument cluster stating " Speed limiter ready " and the AVSL feature will work correctly(Sales Code NH2).
Associated Products (1)Associated Documents - August 29, 2020•Document ID: 10221898Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 1800720REVA
- Date Added:
- September 26, 2022
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC).P2610 - PCM Internal Engine Off Timer Performance. Customers may also experience a message on the instrument cluster stating " Speed limiter ready " after the first press of the speed limiter button and the Active Vehicle Speed Limiter (AVSL) is inoperative(equipped with NH2 Sales Code only).Inform the customer after the software update that the proper operative will be when the customer presses the speed limiter button twice a message on the instrument cluster stating " Speed limiter ready " and the AVSL feature will work correctly(equipped with NH2 Sales Code only).
Associated Products (1)Associated Documents - August 29, 2020•Document ID: 10180290Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 18-006-20 REV. A
- Date Added:
- September 28, 2020
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DTC.P1614-00 - ECU Reset-Recovery Occurred(North America Only). Customers may experience a message on the instrument cluster stating " Speed limiter ready " after the first press of the speed limiter button and the Active Vehicle Speed Limiter (AVSL) is inoperative(Sales Code NH2).Inform the customer after the software update that the proper operative will be when the customer presses the speed limiter button twice a message on the instrument cluster stating " Speed limiter ready " and the AVSL feature will work correctly(Sales Code NH2).
Associated Products (1)Associated Documents - August 29, 2020•Document ID: 10180288Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM
- Mfr Comm. #:
- 18-007-20 REV. A
- Date Added:
- September 28, 2020
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC).P2610 - PCM Internal Engine Off Timer Performance. Customers may also experience a message on the instrument cluster stating " Speed limiter ready " after the first press of the speed limiter button and the Active Vehicle Speed Limiter (AVSL) is inoperative(equipped with NH2 Sales Code only).Inform the customer after the software update that the proper operative will be when the customer presses the speed limiter button twice a message on the instrument cluster stating " Speed limiter ready " and the AVSL feature will work correctly(equipped with NH2 Sales Code only).
Associated Products (1)Associated Documents