Infiniti QX70 Service Bulletins (2014)

110 manufacturer communications on file.

• February 13, 2014•Document ID: 10192323

  Service Bulletin/Repair Instructions
  ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM)

  Mfr Comm. #:

  ITB13056A

  Date Added:

  May 10, 2021

  Manufacturer:

  INFINITI

  Summary

  IF YOU CONFIRM: The MIL is ON and one or both of the following DTCs are found stored in the ECM: - P0139 (heated oxygen sensor 2 (B1) circuit slow response) - P0159 (heated oxygen sensor 2 (B2) circuit slow response) ACTION: 1. Confirm this bulletin applies. - Compare the vehicle's current ECM part number to those listed in Table A (see page 4). 2. If the ECM part number does not match one listed in Table A, this bulletin does not apply. Go back to ASIST for further diagnostic and repair information. 3. If this bulletin applies, reprogram the ECM. See this bulletin for further detail.

  Associated Products (9)

  2014 Infiniti Q502014 Infiniti Q602014 Infiniti QX502014 Infiniti QX702013 Infiniti EX352013 Infiniti FX372013 Infiniti G372013 Infiniti M372012 Infiniti G37
  Associated Documents

  • DownloadMC-10192323-0001.pdf↗
• January 27, 2014•Document ID: 10192314

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM; AIR BAGS

  Mfr Comm. #:

  ITB08024C

  Date Added:

  May 10, 2021

  Manufacturer:

  INFINITI

  Summary

  SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.

  Associated Products (85)

  2014 Infiniti Q502014 Infiniti Q602014 Infiniti Q702014 Infiniti QX502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti EX352013 Infiniti G372013 Infiniti M452013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti M452012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti M452011 Infiniti QX562010 Infiniti EX35+ 65 more
  Associated Documents

  • DownloadMC-10192314-0001.pdf↗
• January 13, 2014•Document ID: 10192294

  Service Bulletin/Repair Instructions
  ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); ENGINE

  Mfr Comm. #:

  ITB14002

  Date Added:

  May 10, 2021

  Manufacturer:

  INFINITI

  Summary

  SERVICE INFORMATION Replacement Engine Control Modules (ECMs) for many newer Infiniti vehicles are now "Blank" ECMs. Blank ECMs come without software and must be programmed (not reprogrammed) before they will function. See this bulletin for further detail.

  Associated Products (41)

  2014 Infiniti Q502014 Infiniti Q602014 Infiniti Q702014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti EX352013 Infiniti FX352013 Infiniti FX372013 Infiniti FX502013 Infiniti G372013 Infiniti M452013 Infiniti QX562012 Infiniti EX352012 Infiniti FX352012 Infiniti FX372012 Infiniti FX502012 Infiniti G372012 Infiniti M452012 Infiniti QX56+ 21 more
  Associated Documents

  • DownloadMC-10192294-0001.pdf↗
• September 26, 2013•Document ID: 10054302

  Service Bulletin/Repair Instructions
  TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS

  Mfr Comm. #:

  ITB-13-039

  Date Added:

  January 9, 2014

  Manufacturer:

  INFINITI

  Summary

  INFINITI: SERVICE BULLETIN CONCERNING LOW TIRE PRESSURE WARNING SYSTEM INFORMATION. *JS

  Associated Products (34)

  2014 Infiniti Q502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti FX352013 Infiniti FX502013 Infiniti JX352013 Infiniti M352013 Infiniti M372013 Infiniti M562013 Infiniti QX562012 Infiniti FX352012 Infiniti FX502012 Infiniti G252012 Infiniti G372012 Infiniti M352012 Infiniti M372012 Infiniti M562012 Infiniti QX562011 Infiniti EX35+ 14 more
  Associated Documents

  • DownloadMC-10054302-0001.pdf↗
• September 3, 2013•Document ID: 10192238

  Service Bulletin/Repair Instructions
  STRUCTURE

  Mfr Comm. #:

  ITB07047D

  Date Added:

  May 10, 2021

  Manufacturer:

  INFINITI

  Summary

  SERVICE INFORMATION Scratch Shield is a scratch-resistant clear coat which "heals" by itself when the vehicle gets a small scratch in the clear coat. If the scratch reaches the color base coat, however, it will not "heal". Scratch Shield was implemented for the first time in the U.S. with the 2008 EX35. NOTE: Scratch Shield is applied to body panels and fasicas only. Scratch Shield Label Vehicles equipped with Scratch Shield have a label (see Figure 1) which is typically located underneath the hood. Vehicles that DO NOT have the Scratch Shield label shown in Figure 1 are not equipped with Scratch Shield. See this bulletin for further detail.

  Associated Products (9)

  2014 Infiniti Q502014 Infiniti Q602014 Infiniti QX502014 Infiniti QX702011 Infiniti G372009 Infiniti EX352009 Infiniti G372009 Infiniti M452008 Infiniti EX35
  Associated Documents

  • DownloadMC-10192238-0001.pdf↗
• August 27, 2013•Document ID: 10192235

  Service Bulletin/Repair Instructions
  EQUIPMENT; WHEELS

  Mfr Comm. #:

  ITB92069D

  Date Added:

  May 10, 2021

  Manufacturer:

  INFINITI

  Summary

  Infiniti Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Infiniti design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Infiniti's standards. Infiniti Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Infiniti most strongly discourages, and recommends that these wheels NEVER be subjected to, aftermarket chroming. See this bulletin for further details.

  Associated Products (81)

  2014 Infiniti Q502014 Infiniti Q602014 Infiniti QX502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti EX352013 Infiniti G372013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti QX562010 Infiniti EX352010 Infiniti G372010 Infiniti M452010 Infiniti QX562009 Infiniti EX35+ 61 more
  Associated Documents

  • DownloadMC-10192235-0001.pdf↗
• August 27, 2013•Document ID: 10054528

  Service Bulletin/Repair Instructions
  WHEELS

  Mfr Comm. #:

  ITB-92-069-D

  Date Added:

  February 1, 2014

  Manufacturer:

  INFINITI

  Summary

  INFINITI: DUE TO USE OF AFTERMARKET CHROMING OF ALLOY WHEELS, FOR SOME VEHICLES, THE STANDARDS ARE NO LONGER ARE MET AND ARE SERIOUSLY DAMAGED AND NOT GUARANTEE OR WARRANTY THE MODIFIED WHEELS OR PERFORMANCE. MODELS ALL. NO YEARS LISTED. *PE

  Associated Products (34)

  2014 Infiniti Q502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti FX352013 Infiniti FX502013 Infiniti JX352013 Infiniti M352013 Infiniti M372013 Infiniti M562013 Infiniti QX562012 Infiniti FX352012 Infiniti FX502012 Infiniti G252012 Infiniti G372012 Infiniti M352012 Infiniti M372012 Infiniti M562012 Infiniti QX562011 Infiniti EX35+ 14 more
  Associated Documents

  • DownloadMC-10054528-0001.pdf↗
• July 23, 2013•Document ID: 10192219

  Service Bulletin/Repair Instructions
  STEERING; SUSPENSION; SERVICE BRAKES

  Mfr Comm. #:

  ITB00024F

  Date Added:

  May 10, 2021

  Manufacturer:

  INFINITI

  Summary

  SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake issues fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel, or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake issue based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific issue. See this bulletin for further details.

  Associated Products (81)

  2014 Infiniti Q502014 Infiniti Q602014 Infiniti QX502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti EX352013 Infiniti G372013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti QX562010 Infiniti EX352010 Infiniti G372010 Infiniti M452010 Infiniti QX562009 Infiniti EX35+ 61 more
  Associated Documents

  • DownloadMC-10192219-0001.pdf↗
• July 23, 2013•Document ID: 10192218

  Service Bulletin/Repair Instructions
  SERVICE BRAKES; WHEELS; STEERING

  Mfr Comm. #:

  ITB04038A

  Date Added:

  May 10, 2021

  Manufacturer:

  INFINITI

  Summary

  If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incidents. - Brake judder: A brake pedal pulsation and/or steering wheel shimmy when braking that occurs when there is too much thickness variation of the brake rotors (see ITB00-024). See this bulletin for further detail.

  Associated Products (81)

  2014 Infiniti Q502014 Infiniti Q602014 Infiniti QX502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti EX352013 Infiniti G372013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti QX562010 Infiniti EX352010 Infiniti G372010 Infiniti M452010 Infiniti QX562009 Infiniti EX35+ 61 more
  Associated Documents

  • DownloadMC-10192218-0001.pdf↗
• June 7, 2013•Document ID: 10192191

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM

  Mfr Comm. #:

  ITB98011F

  Date Added:

  May 10, 2021

  Manufacturer:

  INFINITI

  Summary

  As part of an enhanced emissions test for Inspection & Maintenance (I/M), some States may require the System Readiness Test (SRT) status be checked. - The SRT is used to indicate whether the engine control module (ECM) has completed self diagnosis of major emissions systems and components. - In these instances the State may require completion of the SRT before permitting the emissions inspection to proceed. Refer to this Bulletin for further details.

  Associated Products (63)

  2014 Infiniti QX702013 Infiniti EX352013 Infiniti G372013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti QX562010 Infiniti EX352010 Infiniti G372010 Infiniti M452010 Infiniti QX562009 Infiniti EX352009 Infiniti G372009 Infiniti M452009 Infiniti QX562008 Infiniti EX352008 Infiniti G35+ 43 more
  Associated Documents

  • DownloadMC-10192191-0001.pdf↗