Honda Ridgeline Service Bulletins (2017)
163 manufacturer communications on file.
- September 18, 2018•Document ID: 10145389Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- A17-083
- Date Added:
- October 15, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - The hood flutters or vibrates at highway speeds. Adjust the hood edge cushions to slightly touch the hood while still maintaining proper hood alignment. Inspect the adhesive between the hood skin and the support structure. Apply 3M ULTRAPRO Autobody sealant between hood skin and support structure if needed.
Associated Products (7)Associated Documents - August 25, 2018•Document ID: 10144790Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- A18-080
- Date Added:
- September 24, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - The A/C does not blow cold air, and the lower corner of the condenser around the receiver/dryer cap is stained. There is poor O-ring compression against the receiver/dryer barrel wall.
Associated Products (6)Associated Documents - July 20, 2018•Document ID: 10143359Service Bulletin/Repair InstructionsENGINE; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
- Mfr Comm. #:
- A16-013
- Date Added:
- August 6, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - There is a chirping coming from the engine area with the engine warmed up. The high pressure fuel pump is making a chirp.
Associated Products (7)Associated Documents - July 20, 2018•Document ID: 10143229Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
- Mfr Comm. #:
- A16-013
- Date Added:
- July 30, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - There is a chirping coming from the engine area with the engine warmed up. The high pressure fuel pump is making a chirp.
Associated Products (7)Associated Documents - July 3, 2018•Document ID: 10142670Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A16-056
- Date Added:
- July 16, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - There is an incorrect software setting in the PGM-FI ECU that prevents the i-HDS from doing any of the following: ? Add New Key(s) ? All Keys Lost ? PCM Replacement ? MICU Replacement
Associated Products (1)Associated Documents - June 22, 2018•Document ID: 10142635Service Bulletin/Repair InstructionsEQUIPMENT; STRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS; STRUCTURE:BODY:HOOD
- Mfr Comm. #:
- A18060H
- Date Added:
- July 16, 2018
- Manufacturer:
- HONDA
SummaryServicenews article - Loose bulkhead cover latches and strikers can cause a grinding, rattle, flutter, buzz and/or vibration from the front of the vehicle when lightly accelerating with the engine speed under 2,000 rpm. This can also happen when shifting and may be mistaken for a torque converter shudder.
Associated Products (3)Associated Documents - June 7, 2018•Document ID: 10141167Service Bulletin/Repair InstructionsSTRUCTURE:BODY:ROOF AND PILLARS
- Mfr Comm. #:
- A18-040
- Date Added:
- June 18, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - The roof molding front end caps become loose and lift away from roof panel. The roof molding front end caps are not held on securely.
Associated Products (6)Associated Documents - May 19, 2018•Document ID: 10139549Service Bulletin/Repair InstructionsEQUIPMENT; POWER TRAIN
- Mfr Comm. #:
- A17-026
- Date Added:
- June 11, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - A judder from the torque converter lock-up clutch may be felt while driving between 20 and 60 mph. The problem is typically diagnosed as a bad torque converter. American Honda investigated the judder and found that the torque converter was not causing the judder and the transmission is not damaged by this judder.
Associated Products (1)Associated Documents - May 19, 2018•Document ID: 10139548Service Bulletin/Repair InstructionsPOWER TRAIN; EQUIPMENT
- Mfr Comm. #:
- A17-025
- Date Added:
- June 11, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - A judder from the torque converter lock-up clutch may be felt while driving between 20 and 60 mph. The problem is typically diagnosed as a bad torque converter. American Honda investigated the judder and found that the torque converter was not causing the judder and the transmission is not damaged by this judder.
Associated Products (1)Associated Documents - May 18, 2018•Document ID: 10139552Service Bulletin/Repair InstructionsSTRUCTURE:BODY:ROOF AND PILLARS; EQUIPMENT
- Mfr Comm. #:
- A18-040
- Date Added:
- June 11, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - The roof molding front end caps become loose and lift away from roof panel. The roof molding front end caps are not held on securely.
Associated Products (6)Associated Documents - May 9, 2018•Document ID: 10142615Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- A18-018
- Date Added:
- July 16, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - The customer is unable to insert the fuel nozzle into the filler neck and fuel the vehicle in cold weather. Water or moisture has entered the fueling area and frozen the capless fuel shutter set in the fuel filler neck.
Associated Products (6)Associated Documents - April 26, 2018•Document ID: 10136413Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP; ENGINE
- Mfr Comm. #:
- A16-013
- Date Added:
- May 14, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - There is a chirping coming from the engine area with the engine warmed up. The high pressure fuel pump is making a chirp.
Associated Products (6)Associated Documents - April 25, 2018•Document ID: 10136414Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- A18-024
- Date Added:
- May 14, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - The clock resets, and the navigation shows the vehicle in the wrong location. The navigation unit is faulty.
Associated Products (5)Associated Documents - April 16, 2018•Document ID: 10135066Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- A18-034
- Date Added:
- May 7, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - When adjusting the driver's seat height or tilt, the power seat does not move or moves just a small amount and clicks loudly during operation. The vertical transmission assembly (VTA) unit has a stripped internal gear.
Associated Products (6)Associated Documents - March 26, 2018•Document ID: 10133055Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- ATS180309
- Date Added:
- April 16, 2018
- Manufacturer:
- HONDA
SummaryTech line summary article - Loose bulkhead cover latches and strikers can cause a grinding, rattle, flutter, buzz and/or vibration from the front of the vehicle when lightly accelerating with the engine speed under 2,000 rpm. This can also happen when shifting and may be mistaken for a torque converter shudder.
Associated Products (3)Associated Documents - March 16, 2018•Document ID: 10133020Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM
- Mfr Comm. #:
- A18-018
- Date Added:
- April 16, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - The customer is unable to insert the fuel nozzle into the filler neck and fuel the vehicle in cold weather. Water or moisture has entered the fueling area and frozen the capless fuel shutter set in the fuel filler neck.
Associated Products (5)Associated Documents - February 14, 2018•Document ID: 10129336Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER
- Mfr Comm. #:
- AVE02142018901
- Date Added:
- February 26, 2018
- Manufacturer:
- HONDA
SummaryDealer message - Every Service Bulletin requires you to take an HDS snap shot and use the job aid or Tech2Tech to confirm the judder/shudder is coming from the torque converter.
Associated Products (15)Associated Documents - February 8, 2018•Document ID: 10128893Service Bulletin/Repair InstructionsSTEERING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- A18-010
- Date Added:
- February 21, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - While driving, the customer may experience flickering interior/exterior lights, multiple indicators coming on, jerky steering and/or other voltage-related fluctuations. The B+ sensing screw on the alternator is not torqued properly.
Associated Products (6)Associated Documents - January 24, 2018•Document ID: 10129414Service Bulletin/Repair InstructionsBACK OVER PREVENTION; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A17-036
- Date Added:
- March 5, 2018
- Manufacturer:
- HONDA
SummaryService bulletin - The MIL comes on with DTC P0430 (front bank catalyst system efficiency below threshold [Bank 2]). The PCM software may misinterpret sensor inputs as a deteriorated catalytic converter.
Associated Products (4)Associated Documents - January 10, 2018•Document ID: 10130037Service Bulletin/Repair InstructionsENGINE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- A18010I
- Date Added:
- March 13, 2018
- Manufacturer:
- HONDA
SummaryServicenews article - We?re getting reports of reduced engine power with the MIL on. Service techs are seeing DTC P0369 (CMP sensor circuit intermittent interruption) and signs of excessive camshaft end play.
Associated Products (3)Associated Documents