Genesis G70 Service Bulletins (2023)
47 manufacturer communications on file.
- March 25, 2020•Document ID: 10253047Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 20-BD-008G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin describes the procedure to inspect and repair a G70 with the Wide Sunroof exhibiting creaking or rattling.
Associated Products (4)Associated Documents - November 18, 2019•Document ID: 10253031Service Bulletin/Repair InstructionsVISIBILITY; VISIBILITY:REARVIEW MIRRORS/DEVICES; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 19-BE-017G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryCertain vehicles (listed below) equipped with the HomeLink5 (Two Way Communication) mirror may experience programming and operating difficulties with the home garage system. This bulletin provides information related to some of the possible symptoms.
Associated Products (12)Associated Documents - September 30, 2019•Document ID: 10253026Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 19-AT-023G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryIf you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.
Associated Products (12)Associated Documents - June 12, 2019•Document ID: 10253043Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN
- Mfr Comm. #:
- 19-AT-014G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift.
Associated Products (12)Associated Documents - June 4, 2019•Document ID: 10253025Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN
- Mfr Comm. #:
- 19-AT-012G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
Associated Products (12)Associated Documents - April 15, 2019•Document ID: 10253042Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 19-AT-007G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. ï· Before replacing an automatic transmission: Input the data into the TCU using the GDS. ï· Before replacing a TCU: Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
Associated Products (12)Associated Documents - April 8, 2019•Document ID: 10253024Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 19-AT-008G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryWhen servicing a vehicle with a âCheck Engine lightâ and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
Associated Products (12)Associated Documents