Ford Mustang Recalls (1996)

7 recalls on file.

• Recall06E060000June 29, 2006
  EXTERIOR LIGHTING

  CERTAIN AAI MOTORSPORTS COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LIST PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

  Remedy

  AAI MOTORSPORTS WILL NOTIFY OWNERS AND REPLACE THE LAMPS FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 1, 2006. OWNERS MAY CONTACT AAI MOTORSPORTS AT 909-923-9188.

• Recall06E026000March 23, 2006
  EXTERIOR LIGHTING

  CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

  Remedy

  PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.

• Recall06E025000March 21, 2006
  EXTERIOR LIGHTING:HEADLIGHTS

  CERTAIN POLI-AUTO COMBINATION HEADLAMP ASSEMBLIES, P/NOS. 11-728, 11-728D, 11-710, 11-419, 11-713, 11-703, 11-704, 11-708P, 11-735, 11-725, 11-726, 11-716 (P&C), 11-721-1, 11-733, 11-729, 11-730, AND 11-732, SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

  Remedy

  POLI-AUTO WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE HEADLAMPS AT ITS ORIGINAL PURCHASE PRICE. THE RECALL IS EXPECTED TO BEGIN DURING APRIL 2006. OWNERS MAY CONTACT POLI-AUTO AT 305-477-1356.

• Recall06E023000March 13, 2006
  EXTERIOR LIGHTING:HEADLIGHTS

  CERTAIN ANZO COMBINATION HEADLAMP ASSEMBLIES SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES. SOME COMBINATION LAMPS ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS WHICH FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

  Remedy

  ANZO WILL NOTIFY OWNERS AND REPLACE THE HEADLAMPS FREE OF CHARGE. THE RECALL BEGAN MAY 9, 2006. OWNERS MAY CONTACT ANZO USA AT 909-468-3688.

• Recall01V318000October 3, 2001
  AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

  EQUIPMENT DESCRIPTION: PASSENGER VEHICLES THAT HAVE HAD THE DRIVER'S AIR BAG MODULE REPLACED AFTER APRIL 5, 2000. THE REPLACEMENT DRIVER'S AIR BAG MODULE INFLATOR MAY HAVE INSUFFICIENT WELDS THAT COULD PREVENT PROPER INFLATION OF THE AIR BAG.

  Remedy

  DEALERS WILL INSPECT AND, IF NECESSARY, REPLACE THE DRIVER'S AIR BAG MODULE. OWNER NOTIFICATION BEGAN OCTOBER 5, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-866-436-7332.

• Recall00V349000October 30, 2000
  PARKING BRAKE:CONVENTIONAL

  VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH MANUAL TRANSMISSIONS. IF A VEHICLE IS PARKED WITH THE PARKING BRAKE NOT FULLY APPLIED AND NOT IN FIRST GEAR, AS DIRECTED IN THE OWNER GUIDE, AND THE SELF ADJUSTMENT PAWL SUBSEQUENTLY SKIPS ONE OR TWO TEETH, THE VEHICLE COULD MOVE ON SOME GRADES.

  Remedy

  DEALERS WILL MODIFY THE PARKING BRAKE CONTROL AND INSTALL A PLATE OR OVER-BRACKET TO THE CONTROL TO LOCK THE SELF ADJUST MECHANISM IN POSITION FOLLOWING ADJUSTMENT.

• Recall97V180000October 20, 1997
  STRUCTURE:BODY:HOOD

  VEHICLE DESCRIPTION: PASSENGER VEHICLES AND MINI VANS. TEARING OF THE BOND BETWEEN THE INNER AND OUTER HOOD PANELS DURING MINOR FRONT END COLLISIONS CAN RESULT IN A GAP AT THE LEADING EDGE OF THE HOOD. AIR FORCED BETWEEN THE INNER AND OUTER PANELS CAN PRODUCE ENOUGH PRESSURE TO FORCE THE OUTER PANEL UPWARD.

  Remedy

  DEALERS WILL INSPECT THE HOOD AREA FOR ANY DAMAGE ALONG THE LEADING EDGE OF THE HOOD. IF THERE IS ANY EVIDENCE OF BOND SEPARATION, THE HOOD WILL BE REPLACED. IF THERE IS NO EVIDENCE OF BOND SEPARATION, ADDITIONAL ADHESIVE WILL BE APPLIED BETWEEN THE INNER AND OUTER HOOD PANELS.