Ford Mustang Service Bulletins (2017)
155 manufacturer communications on file.
- November 29, 2017•Document ID: 10127424Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; LANE DEPARTURE; EQUIPMENT; BACK OVER PREVENTION
- Mfr Comm. #:
- SSM 46947
- Date Added:
- January 29, 2018
- Manufacturer:
- FORD
SummarySome 2016-2017 Ford and Lincoln vehicles with SYNC 3 may intermittently display an overhead image of a vehicle in the center of the SYNC touchscreen with no obstacle detection grids or warning chimes. SYNC may appear unresponsive when the overhead vehicle image is displayed. The vehicle image may intermittently display after shifting out of reverse or turning the vehicle off when in reverse. SYNC software updates are now available under the OASIS Tab SYNC selection. If an update is available, refer to WSM Section 415-00 and update the APIM software. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
Associated Products (42)2017 Ford C-Max2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford Explorer2017 Ford F-1502017 Ford F-2502017 Ford F-3502017 Ford F-4502017 Ford F-5502017 Ford F-6502017 Ford F-7502017 Ford Fiesta2017 Ford Flex2017 Ford Focus2017 Ford Fusion2017 Ford Mustang2017 Ford Taurus2017 Ford Transit2017 Ford Transit Connect+ 22 moreAssociated Documents - November 22, 2017•Document ID: 10127417Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- SSM 46930
- Date Added:
- January 29, 2018
- Manufacturer:
- LINCOLN
SummarySome 2016-2018 Ford or Lincoln vehicles equipped with SYNC 3 may exhibit a blank screen or other various SYNC symptoms only when the vehicle is in transport mode. This is due to the power saving features enabled while in transport mode and is beneficial for battery life to keep the vehicle in transport mode until the vehicle is prepped for sale. To prevent a SYNC system lockup during transport mode deactivation, follow the Workshop Manual (WSM) procedure allowing time for the SYNC system to complete all tasks such as fully booting up or powering down and shutting off before moving to the next step of the procedure. If the vehicle exhibits a blank screen or SYNC symptoms after transport mode deactivation, refer to WSM, Section 415-00 for normal diagnosis. The SYNC version can be confirmed via OASIS.
Associated Products (51)2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford Explorer+ 31 moreAssociated Documents - November 2, 2017•Document ID: 10127405Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- SSM 46900
- Date Added:
- January 29, 2018
- Manufacturer:
- FORD
SummarySome vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
Associated Products (202)2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKZ2017 Ford C-Max2017 Ford E-2502017 Ford E-3502017 Ford E-4502017 Ford Edge2017 Ford Escape+ 182 moreAssociated Documents - October 6, 2017•Document ID: 10125079Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- SSM 46861
- Date Added:
- December 14, 2017
- Manufacturer:
- FORD
SummarySome 2016-2017 Ford and Lincoln vehicles with SYNC 3 may intermittently display an overhead image of a vehicle in the center of the SYNC touchscreen with no obstacle detection grids or warning chimes. SYNC may appear unresponsive when the overhead vehicle image is displayed. The vehicle image may intermittently display after shifting out of reverse or turning the vehicle off when in reverse. To recover the screen, perform any one of the following actions: touch the SYNC screen anywhere outside the vehicle image pop-up box, safely shift the vehicle into and out of reverse, or perform a complete ignition cycle (key off, open and close the driver's door then wait 5 minutes). If this does not resolve the concern, do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.
Associated Products (42)2017 Ford C-Max2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford Explorer2017 Ford F-1502017 Ford F-2502017 Ford F-3502017 Ford F-4502017 Ford F-5502017 Ford F-6502017 Ford F-7502017 Ford Fiesta2017 Ford Flex2017 Ford Focus2017 Ford Fusion2017 Ford Mustang2017 Ford Taurus2017 Ford Transit2017 Ford Transit Connect+ 22 moreAssociated Documents - October 6, 2017•Document ID: 10125078Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- SSM 46860
- Date Added:
- December 14, 2017
- Manufacturer:
- LINCOLN
SummarySome 2016-2018 Ford or Lincoln vehicles equipped with SYNC 3 may exhibit a blank screen or other various SYNC symptoms only when the vehicle is in transport mode. This is due to the power saving features enabled while in transport mode and is beneficial for battery life to keep the vehicle in transport mode until the vehicle is prepped for sale. To prevent a SYNC system lockup during transport mode deactivation, follow the Workshop Manual (WSM) procedure allowing time for the SYNC system to complete all tasks such as fully booting up or powering down and shutting off before moving to the next step of the procedure. If the vehicle exhibits a blank screen or SYNC symptoms after transport mode deactivation, refer to WSM, Section 415-00 for normal diagnosis. The SYNC version can be confirmed via OASIS.
Associated Products (57)2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford Explorer+ 37 moreAssociated Documents - September 28, 2017•Document ID: 10119684Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SSM 46848
- Date Added:
- October 21, 2017
- Manufacturer:
- FORD
SummarySome owners of 2016-2017 Ford and Lincoln vehicles equipped with SYNC 3 may experience inoperative mobile device navigation applications. Mobile device navigation via AppLink requires SYNC 3 version 2.3 or higher for Apple iOS users. Mobile device navigation via AppLink is not currently available for Android users. SYNC 3 software upgrades to support these apps are not currently available, do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates. SYNC 3 software upgrade to support these apps is not a warrantable repair per the Warranty And Policy Manual, Section 3, Warranty Coverages SYNC.
Associated Products (34)2017 Ford C-Max2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford F-1502017 Ford Fiesta2017 Ford Focus2017 Ford Mustang2017 Ford Taurus2017 Ford Transit2017 Ford Transit Connect2017 Lincoln Continental2017 Lincoln MKC2017 Lincoln MKT2017 Lincoln MKX2017 Lincoln MKZ2017 Lincoln Navigator2016 Ford C-Max2016 Ford Edge2016 Ford Escape+ 14 moreAssociated Documents - September 21, 2017•Document ID: 10119678Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SSM 46834
- Date Added:
- October 21, 2017
- Manufacturer:
- LINCOLN
SummarySome 2016-2017 Ford and Lincoln vehicles with SYNC 3 may exhibit an intermittent blue or black screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
Associated Products (37)2017 Ford C-Max2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford Explorer2017 Ford F-1502017 Ford Fiesta2017 Ford Flex2017 Ford Focus2017 Ford Fusion2017 Ford Mustang2017 Ford Taurus2017 Ford Transit2017 Ford Transit Connect2017 Lincoln Continental2017 Lincoln MKC2017 Lincoln MKT2017 Lincoln MKX2017 Lincoln MKZ2017 Lincoln Navigator+ 17 moreAssociated Documents - September 13, 2017•Document ID: 10119671Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SSM 46816
- Date Added:
- October 21, 2017
- Manufacturer:
- FORD
Summary2017 vehicles equipped with a 2.0L GTDI, 2.3L GTDI, or 2.5L PFI engine will either be equipped with a diamond washer on each side of a smooth-faced crankshaft timing sprocket (early build), or a crankshaft timing sprocket with laser etched faces and no diamond washers (late build). If equipped, diamond washers should be cleaned, inspected and reused, if undamaged. Diamond washers should never be installed along with a laser etched crankshaft timing sprocket. Related WSM procedure information is in the process of being updated.
Associated Products (11)Associated Documents - September 13, 2017•Document ID: 10119669Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SSM 46813
- Date Added:
- October 21, 2017
- Manufacturer:
- LINCOLN
SummarySome 2016-2017 Ford and Lincoln vehicles equipped with SYNC 3 version 2.2 software may exhibit a blank screen after attempting to exit Valet mode. To recover the screen, perform a complete ignition cycle (key off, open and close the driver's door then wait 5 minutes). The SYNC software version of the vehicle can be confirmed via OASIS. Do not attempt any repairs at this time. Engineering is investigating; Monitor OASIS for updates.
Associated Products (34)2017 Ford C-Max2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford F-1502017 Ford Fiesta2017 Ford Focus2017 Ford Mustang2017 Ford Taurus2017 Ford Transit2017 Ford Transit Connect2017 Lincoln Continental2017 Lincoln MKC2017 Lincoln MKT2017 Lincoln MKX2017 Lincoln MKZ2017 Lincoln Navigator2016 Ford C-Max2016 Ford Edge2016 Ford Escape+ 14 moreAssociated Documents - July 14, 2017•Document ID: 10115952Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SSM 46702
- Date Added:
- August 25, 2017
- Manufacturer:
- LINCOLN
SummarySome 2016-2017 Ford/Lincoln vehicles SYNC 3 may exhibit an intermittent blank screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. During the update process the SYNC status bar shows Updating System Software for approximately 30 minutes. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or blank screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
Associated Products (20)2017 Ford C-Max2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford Explorer2017 Ford F-1502017 Ford Fiesta2017 Ford Flex2017 Ford Focus2017 Ford Fusion2017 Ford Mustang2017 Ford Taurus2017 Ford Transit2017 Ford Transit Connect2017 Lincoln Continental2017 Lincoln MKC2017 Lincoln MKT2017 Lincoln MKX2017 Lincoln MKZ2017 Lincoln NavigatorAssociated Documents - April 18, 2017•Document ID: 10109001Service Bulletin/Repair InstructionsBACK OVER PREVENTION: CAMERA SYSTEM; EQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- TSB 17-2068
- Date Added:
- August 1, 2017
- Manufacturer:
- FORD
SummarySome 2016-2017 Edge, Escape, Expedition, Fiesta, Flex, MKC, MKT, MKX, Mustang, Navigator and Taurus or 2017 Explorer and Super Duty vehicles equipped with SYNC 3 and built on 1-Jul-2015 and through 31-Dec-2016 may exhibit a SYNC display message of Please check your surroundings for safety along with no rear view camera image when in reverse gear. This will occur only at ambient temperatures ranging from -5 Å'C to 5 Å'C (23 Å'F to 41 Å'F). This maybe due to a temperature dependent issue within the APIM crystal oscillator circuitry. Follow the Service Procedure steps to correct the condition.
Associated Products (24)2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford Explorer2017 Ford F-2502017 Ford Fiesta2017 Ford Flex2017 Ford Mustang2017 Ford Taurus2017 Lincoln MKC2017 Lincoln MKT2017 Lincoln MKX2017 Lincoln Navigator2016 Ford Edge2016 Ford Escape2016 Ford Expedition2016 Ford Fiesta2016 Ford Flex2016 Ford Mustang2016 Ford Taurus+ 4 moreAssociated Documents - April 13, 2017•Document ID: 10109017Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- SSM 46529
- Date Added:
- August 1, 2017
- Manufacturer:
- FORD
SummarySome 2015 - 2017 Mustang vehicles may experience exhaust alignment issues. Before replacement of exhaust system components for this issue, align the exhaust system following the workshop manual (WSM) procedure found in section 309-00, Muffler and Tailpipe removal and installation. The WSM procedure has been revised with updated steps to resolve these issues.
Associated Products (3)Associated Documents - March 23, 2017•Document ID: 10100508Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- SSM 46486
- Date Added:
- May 24, 2017
- Manufacturer:
- FORD
SummarySOME 2016-2017 FORD OR LINCOLN VEHICLES EQUIPPED WITH SYNC 3 MAY EXHIBIT A BLANK SCREEN OR OTHER VARIOUS SYNC SYMPTOMS ONLY WHEN THE VEHICLE IS IN TRANSPORT MODE. THIS IS CONSIDERED NORMAL DUE TO THE POWER SAVING FEATURES ENABLED WHILE IN TRANSPORT MODE. IT IS BENEFICIAL FOR BATTERY LIFE TO KEEP THE VEHICLE IN TRANSPORT MODE UNTIL THE VEHICLE IS PREPPED FOR SALE. TO PREVENT A SYNC SYSTEM LOCKUP DURING TRANSPORT MODE DEACTIVATION, FOLLOW THE WORKSHOP MANUAL (WSM) PROCEDURE EXACTLY ALLOWING TIME FOR THE SYNC SYSTEM TO COMPLETE ITS TASKS SUCH AS FULLY BOOTING UP OR POWERING DOWN AND SHUTTING OFF BEFORE MOVING TO THE NEXT STEP OF THE PROCEDURE. IF THE VEHICLE EXHIBITS A BLANK SCREEN OR SYNC SYMPTOMS AFTER TRANSPORT MODE DEACTIVATION, REFER TO WSM, SECTION 415-00 FOR NORMAL DIAGNOSIS. THE SYNC VERSION CAN BE CONFIRMED VIA OASIS.
Associated Products (41)2017 Ford C-Max2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford Explorer2017 Ford F-1502017 Ford F-2502017 Ford F-3502017 Ford F-4502017 Ford F-5502017 Ford F-6502017 Ford F-7502017 Ford Fiesta2017 Ford Flex2017 Ford Focus2017 Ford Mustang2017 Ford Taurus2017 Ford Transit2017 Ford Transit Connect2017 Lincoln Continental+ 21 moreAssociated Documents - March 20, 2017•Document ID: 10100524Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 17B04
- Date Added:
- May 24, 2017
- Manufacturer:
- FORD
SummaryCERTAIN 2015 THROUGH 2017 MODEL YEAR MUSTANG SHELBY® GT350 AND GT350R VEHICLES - COMPLIMENTARY OIL FILTER WRENCH.
Associated Products (3)Associated Documents - March 14, 2017•Document ID: 10099463Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- SSM 46451
- Date Added:
- May 17, 2017
- Manufacturer:
- FORD
Summary2009-2017 VEHICLES EQUIPPED WITH A 6R80, 6R100, 6R140 AUTOMATIC TRANSMISSION HAVE AN UPDATED MAIN CONTROL VALVE BODY OVERHAUL PROCEDURE. REFER TO WORKSHOP MANUAL (WSM), SECTION 307-01 FOR MAIN CONTROL VALVE BODY (7A100) OVERHAUL PROCEDURES. NOT ALL VALVE BODIES REQUIRE REPLACEMENT. INSPECT THE VALVE BODY BORES, SPRINGS AND VALVES AS DIRECTED DURING DIAGNOSIS AND REPAIR. REFER TO GENERAL SERVICE BULLETIN (GSB) G0000093 AUTOMATIC TRANSMISSION MAIN CONTROL INSPECTION FOR A VIDEO CLIP TO AID IN THE DIAGNOSIS OF THESE REPAIRS.
Associated Products (91)2017 Ford E-2502017 Ford E-3502017 Ford E-4502017 Ford Expedition2017 Ford F-1502017 Ford F-2502017 Ford F-3502017 Ford F-4502017 Ford F-5502017 Ford F-6502017 Ford F-7502017 Ford Mustang2017 Ford Ranger2017 Lincoln Navigator2016 Ford E-1502016 Ford E-2502016 Ford E-3502016 Ford E-4502016 Ford Expedition2016 Ford F-150+ 71 moreAssociated Documents - March 14, 2017•Document ID: 10099458Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- SSM 46450
- Date Added:
- May 17, 2017
- Manufacturer:
- FORD
SummarySOME VEHICLES MAY EXHIBIT AN ILLUMINATED MIL WITH DIAGNOSTIC TROUBLE CODES (DTCS) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 AND/OR P0025. THIS MAY BE DUE TO SMALL DEBRIS CAUSING THE VCT SOLENOID TO STICK. BEFORE ATTEMPTING ANY COMPONENT DIAGNOSIS OR REPLACEMENT OF THE VCT SOLENOID, REFER TO POWERTRAIN CONTROL AND EMISSIONS DIAGNOSIS (PC/ED) PINPOINT TEST HK11 TO CYCLE THE AFFECTED VCT SOLENOID 10 TIMES TO ATTEMPT TO CLEAR THE DEBRIS. FOR CLAIMING, USE CAUSAL PART 6M280 AND APPLICABLE LABOR OPERATIONS IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.
Associated Products (29)2017 Ford C-Max2017 Ford E-2502017 Ford E-3502017 Ford E-4502017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford Explorer2017 Ford F-1502017 Ford F-2502017 Ford F-3502017 Ford F-4502017 Ford F-5502017 Ford F-6502017 Ford F-7502017 Ford Fiesta2017 Ford Flex2017 Ford Focus2017 Ford Fusion2017 Ford Mustang+ 9 moreAssociated Documents - February 24, 2017•Document ID: 10095621Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- TSB 17-0019
- Date Added:
- March 17, 2017
- Manufacturer:
- FORD
SummarySOME 2017 MUSTANG VEHICLES EQUIPPED WITH A 2.3L ENGINE AND BUILT ON OR BEFORE 13-JAN-2017 MAY EXHIBIT AN ILLUMINATED MIL WITH DTCS P0456, P1450 AND/OR P144C. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
Associated Products (1)Associated Documents - January 24, 2017•Document ID: 10095184Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SSM 46332
- Date Added:
- March 15, 2017
- Manufacturer:
- LINCOLN
SummaryREPLACING THE ORIGINAL EQUIPMENT SYNC/NAVIGATION SYSTEM WITH EITHER AN AFTERMARKET SYNC/NAVIGATION KIT OR MODIFYING ORIGINAL SYNC/NAVIGATION PARTS TO PROVIDE ADDITIONAL FEATURES IS NOT RECOMMENDED NOR SUPPORTED ON ANY FORD, MERCURY OR LINCOLN VEHICLE. ONLY APPROVED GENUINE FORD ACCESSORIES OR ORIGINALLY INSTALLED SYSTEMS ARE SUPPORTED AND CERTIFIED TO FUNCTION CORRECTLY WITH OTHER VEHICLE SYSTEMS. IF YOU SUSPECT A SYSTEM HAS BEEN MODIFIED, THE FOLLOWING RESOURCES CAN BE USED TO VERIFY ORIGINAL EQUIPMENT: MONRONEY LABEL (WINDOW STICKER), PROFESSIONAL TECHNICIAN SOCIETY (PTS) OASIS TAB SELECT SYNC OR HVBOM. FOR GENUINE FORD ACCESSORIES USE: PTS WORKSHOP TAB SELECT DEALER INSTALLED ACCESSORY OR ACCESSORY INSTALLATION.
Associated Products (177)2017 Ford F-2502017 Ford F-3502017 Ford F-4502017 Ford F-5502017 Ford F-6502017 Ford F-7502017 Ford Flex2017 Ford Focus2017 Ford Fusion2017 Ford Mustang2017 Ford Taurus2017 Ford Transit2017 Ford Transit Connect2017 Lincoln Continental2017 Lincoln MKC2017 Lincoln MKT2017 Lincoln MKX2017 Lincoln MKZ2017 Lincoln Navigator2016 Ford F-250+ 157 moreAssociated Documents - January 10, 2017•Document ID: 10095154Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SSM 46295
- Date Added:
- March 15, 2017
- Manufacturer:
- FORD
SummaryTO HELP DIFFERENTIATE ENGINE OIL LEAKS FROM OTHER POSSIBLE SOURCES, A NEW WHITE-COLORED FLUORESCENT ENGINE OIL DYE IS AVAILABLE. WORKSHOP MANUAL (WSM), SECTION 303-00 HAS BEEN REVISED TO REFERENCE THE NEW WHITE-COLORED DYE. THE NEW WHITE FLUORESCENT DYE PROVIDES A DISTINCT WHITE GLOW TO IDENTIFY ENGINE OIL LEAKS. THE NEW WHITE FLUORESCENT DYE REQUIRES A PURE UV DIAGNOSTIC INSPECTION LAMP. THE WHITE-COLORED FLUORESCENT DYE AND PURE UV LAMP ARE NOW IN THE ROTUNDA CATALOG. DYE AND LAMP PART NUMBERS. GASOLINE ONLY DYE: 1 OUNCE BOTTLE 164-TP-33200601. DIESEL ONLY DYE: 8 OUNCE BOTTLE: 164-TP-3320-0008. PURE UV DIAGNOSTIC INSPECTION LAMP 164-TP8695 OR 164-R3748.
Associated Products (162)2017 Ford C-Max2017 Ford Escape2017 Ford Expedition2017 Ford Explorer2017 Ford F-1502017 Ford F-2502017 Ford F-3502017 Ford F-4502017 Ford F-5502017 Ford F-6502017 Ford F-7502017 Ford Fiesta2017 Ford Flex2017 Ford Focus2017 Ford Fusion2017 Ford Mustang2017 Ford Transit2017 Ford Transit Connect2017 Lincoln Continental2017 Lincoln MKC+ 142 moreAssociated Documents - November 2, 2016•Document ID: 10095976Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- SSM 46174
- Date Added:
- March 20, 2017
- Manufacturer:
- FORD
Summary2015 - 2017 SHELBY GT350 AND GT350R VEHICLES REQUIRE INSTALLATION OF THE 3 PIECE FRONT SPLITTER ON GT350 AND 1 PIECE FRONT SPLITTER ON THE GT350R MODELS DURING PRE-DELIVERY INSPECTION (PDI). INSTALLATION INSTRUCTIONS CAN BE FOUND ON THE PROFESSIONAL TECHNICIAN SOCIETY (PTS) WEBSITE UNDER THE PDI TAB FOR EACH OF THE MODELS. THERE IS ALSO A LINK WITHIN THE INSTRUCTIONS FOR EACH OF THE VEHICLES TO A VIDEO DEPICTING THE INSTALLATION. FAILURE TO PROPERLY INSTALL THE SPLITTER COULD RESULT IN DAMAGE TO THE SPLITTER OR OTHER COMPONENTS DURING OPERATION OF THE VEHICLE.
Associated Products (3)Associated Documents